11.060.20 - Dental equipment

This document specifies general requirements and test methods for accuracy of electronic apex locator that use more than two different frequencies to determine root canal length during root canal treatment.

This document specifies general requirements and test methods for portable dental equipment for use in non-permanent healthcare environments. Portable dental equipment within the scope of this document includes portable dental units, portable patient chairs, portable operator's stools, portable operating lights, portable suction source equipment, portable air compressors and other portable dental equipment in instances where these devices are designed and constructed to be transported for use in...view more

This document specifies requirements and test methods for hand-held and mechanically operated instruments used for shaping and cleaning root canals, and which are not specified in other parts of the ISO 3630 series. This document specifies requirements for size, marking, product designation, safety considerations, labelling and packaging.

This document applies to central compressed air source equipment for dental compressed air used in dentistry. It specifies functional requirements for compressed air source equipment and quality requirements for the dental compressed air produced by the compressed air source equipment.
This International Standard specifies the purity level of dental compressed air and test procedures for central compressed air source equipment and test procedures for the quality requirements for dental compress...view more

This document specifies requirements and test methods for central compressed air source equipment supplying dental air for dental units and various dental air consuming devices in the dental office. It also specifies quality requirements and test methods for the dental air produced by the central compressed air source equipment, such as requirements for the purity level of dental air. It also specifies requirements for information to be supplied by the manufacturer on the performance, installati...view more

This document specifies stainless steel commonly used in manufacturing dental instruments. It is applicable to stainless steel materials used to manufacture either an entire instrument or a part of the instrument. It is applicable to single-use and reusable dental instruments, whether it is or it is not connected to a power-driven system. This document is not applicable to devices and instruments used long-term in the mouth of the patient (e.g. crown, bridges, implants) or to devices and instrum...view more

2020-03-17-JO- BT decision BT164/DG11529/DV to remove the link to the MDD (93/42/EEC)
Publication on hold due to negative assessment

EN-IEC 80601-2-60 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE OF DENTAL UNITS, DENTAL PATIENT CHAIRS, DENTAL HANDPIECES AND DENTAL OPERATING LIGHTS, hereafter referred to as DENTAL EQUIPMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inher...view more

This document specifies requirements and test methods for spoons and bone curettes used in dentistry for oral surgical procedures.
It specifies shapes and dimensions as well as information for marking.

EN-ISO 15098 specifies general requirements and test methods for metallic dentaltweezers of the Meriam type and for College type. This document is notapplicable to anatomical tweezers and surgical tweezers.

This document specifies dimensional and other requirements for the 11 most commonly used carbide cutters which are predominantly used in the dental laboratory.
NOTE These cutters are also used in podiatry.

EN-ISO 9997 specifies requirements and test methods for cartridge syringes used in dentistry. These syringes are of the non-aspirating, aspirating and self-aspirating types using cartridges with dental local anaesthetics.This document is not applicable to cartridge syringes having a mechanical-advantage action for creating high pressure.This document specifies requirements for cartridge syringes with ISO metric thread sizes. However, attention is drawn to the existence of a variety of syringes w...view more

This document specifies general requirements and test methods for metallic dental tweezers of the Meriam type and for College type.
This document is not applicable to anatomical tweezers and surgical tweezers.

This document specifies requirements and test methods for spoons and bone curettes used in dentistry for oral surgical procedures.
It specifies shapes and dimensions as well as information for marking.

This document specifies dimensional and other requirements for the 11 most commonly used carbide cutters which are predominantly used in the dental laboratory. NOTE These cutters are also used in podiatry.

This document specifies general requirements and test methods for metallic dental tweezers of the Meriam type and for College type. This document is not applicable to anatomical tweezers and surgical tweezers.

This document specifies requirements and test methods for cartridge syringes used in dentistry. These syringes are of the non-aspirating, aspirating and self-aspirating types using cartridges with dental local anaesthetics.
This document is not applicable to cartridge syringes having a mechanical-advantage action for creating high pressure.
This document specifies requirements for cartridge syringes with ISO metric thread sizes. However, attention is drawn to the existence of a variety of syri...view more

This document specifies requirements and test methods for spoons and bone curettes used in dentistry for oral surgical procedures. It specifies shapes and dimensions as well as information for marking.

This document specifies requirements and test methods for cartridge syringes used in dentistry. These syringes are of the non-aspirating, aspirating and self-aspirating types using cartridges with dental local anaesthetics. This document is not applicable to cartridge syringes having a mechanical-advantage action for creating high pressure. This document specifies requirements for cartridge syringes with ISO metric thread sizes. However, attention is drawn to the existence of a variety of syring...view more

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of DENTAL EXTRA-ORAL X-RAY EQUIPMENT, hereafter also called ME EQUIPMENT. The scope includes ME SYSTEMS containing such ME EQUIPMENT.
NOTE 1 This includes PANORAMIC equipment, CEPHALOMETRIC equipment, and equipment for dental volumetric reconstruction (hereafter DVR) as defined in 201.3.203 below.
NOTE 2 DVR includes dental CBCT (cone beam computed tomography), which is also known with other names in certain par...view more