Dentistry - Dental tweezers (ISO 15098:2020)

EN-ISO 15098 specifies general requirements and test methods for metallic dentaltweezers of the Meriam type and for College type. This document is notapplicable to anatomical tweezers and surgical tweezers.

Zahnheilkunde - Dentalpinzetten (ISO 15098:2020)

Dieses Dokument legt allgemeine Anforderungen und Prüfverfahren für metallische Dentalpinzetten vom Meriam-Typ und vom College-Typ fest.
Dieses Dokument gilt nicht für anatomische Pinzetten und chirurgische Pinzetten.

Médecine bucco-dentaire - Précelles dentaires (ISO 15098:2020)

Le présent document spécifie les exigences générales et les méthodes d'essai relatives aux précelles dentaires métalliques de types Meriam et College.
Le présent document n'est pas applicable aux précelles anatomiques et chirurgicales.

Zobozdravstvo - Dentalne pincete (ISO 15098:2020)

General Information

Status
Published
Public Enquiry End Date
09-Apr-2019
Publication Date
01-Apr-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
31-Mar-2020
Due Date
05-Jun-2020
Completion Date
02-Apr-2020

RELATIONS

Buy Standard

Standard
SIST EN ISO 15098:2020 - BARVE na PDF-str 19
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 15098:2020
01-maj-2020
Nadomešča:
SIST EN ISO 15098-1:2002
SIST EN ISO 15098-2:2000
SIST EN ISO 15098-3:2000
Zobozdravstvo - Dentalne pincete (ISO 15098:2020)
Dentistry - Dental tweezers (ISO 15098:2020)
Zahnheilkunde - Dentalpinzetten (ISO 15098:2020)
Médecine bucco-dentaire - Précelles dentaires (ISO 15098:2020)
Ta slovenski standard je istoveten z: EN ISO 15098:2020
ICS:
11.060.20 Zobotehnična oprema Dental equipment
SIST EN ISO 15098:2020 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15098:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 15098:2020
EN ISO 15098
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 11.060.20 Supersedes EN ISO 15098-1:2001, EN ISO 15098-
2:2000, EN ISO 15098-3:2000
English Version
Dentistry - Dental tweezers (ISO 15098:2020)

Médecine bucco-dentaire - Précelles dentaires (ISO Zahnheilkunde - Dentalpinzetten (ISO 15098:2020)

15098:2020)
This European Standard was approved by CEN on 28 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15098:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 15098:2020
EN ISO 15098:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 15098:2020
EN ISO 15098:2020 (E)
European foreword

This document (EN ISO 15098:2020) has been prepared by Technical Committee ISO/TC 106

"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which

is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by September 2020, and conflicting national standards

shall be withdrawn at the latest by September 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 15098-2:2000, EN ISO 15098-3:2000 and EN ISO 15098-1:2001.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 15098:2020 has been approved by CEN as EN ISO 15098:2020 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 15098:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 15098:2020
INTERNATIONAL ISO
STANDARD 15098
First edition
2020-02
Dentistry — Dental tweezers
Médecine bucco-dentaire — Précelles dentaires
Reference number
ISO 15098:2020(E)
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 15098:2020
ISO 15098:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 15098:2020
ISO 15098:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Classification ............................................................................................................................................................................................................ 2

5 Requirements .......................................................................................................................................................................................................... 2

5.1 Design and dimensions .................................................................................................................................................................... 2

5.1.1 Length........................................................................................................................................................................................ 3

5.1.2 Working end......................................................................................................................................................................... 7

5.1.3 Handle ....................................................................................................................................................................................... 7

5.1.4 Guide pin ................................................................................................................................................................................. 7

5.2 Material ......................................................................................................................................................................................................... 7

5.3 Hardness (of working end) .......................................................................................................................................................... 7

5.4 Surface finish ............................................................................................................................................................................................ 7

5.4.1 All surfaces ............................................................................................................................................................................ 7

5.4.2 Satin finish ............................................................................................................................................................................. 8

5.5 Closing and opening forces ........................................................................................................................................................... 8

5.6 Resistance to reprocessing ........................................................................................................................................................... 8

6 Measurement and test methods ........................................................................................................................................................... 8

6.1 Visual inspection ................................................................................................................................................................................... 8

6.2 Dimensions ................................................................................................................................................................................................. 8

6.3 Closing and opening forces ........................................................................................................................................................... 8

6.4 Resistance to reprocessing ........................................................................................................................................................... 9

7 Marking, labelling and instructions for use ............................................................................................................................. 9

7.1 Marking on the dental tweezers .............................................................................................................................................. 9

7.2 Labelling on the package .............................................................................................................................................................10

7.3 Instructions for use ..........................................................................................................................................................................10

Bibliography .............................................................................................................................................................................................................................11

© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 15098:2020
ISO 15098:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of

any patent rights identified during the development of the document will be in the Introduction and/or

on the ISO list of patent declarations received (see www .iso .org/ patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the

World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/

iso/ foreword .html.
This document was p
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.