13.280 - Radiation protection
Radiation protection
Strahlenschutz
Protection contre les rayonnements
Varstvo pred sevanjem
General Information
This standard describes the requirements for rapid testing of water samples under emergency situations in laboratories:
- taking into account a special context for analyses, e.g. an unknown and unusual contamination;
- using or adapting if possible radioactivity measurements methods used in routine to get a result
rapidly or applying specific rapid methods previously tested by the laboratory, e.g. for 89Sr determination ;
- preparing the laboratory to analyse a large number of potentially co...view more
- Standard29 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft25 pagesEnglish language
sale 10% off- e-Library read for1 day
This document contains the terms, definitions, notes to entry and examples corresponding to the frequently used concepts which apply to diagnostic and therapeutic nuclear medicine. It comprises the minimum essential information for each nuclear medicine concept represented by a single term. It provides the reader with the information required to approach this multidisciplinary speciality, such as medical, radiopharmacy and medical physics point of view. It is intended to facilitate communication...view more
- Standard18 pagesEnglish language
sale 15% off- Draft19 pagesEnglish language
sale 15% off- Draft19 pagesEnglish language
sale 15% off
IEC 62484:2020 defines the performance requirements of installed monitors used for the detection and identification of gamma emitters and the detection of neutron radiation emitters. These monitors are commonly known as spectrometric radiation portal monitors or SRPMs. They are used to monitor vehicles, cargo containers, people, or packages and are typically used at national and international border crossings and ports of entry. SRPMs may be used at any location where there is a need for this ty...view more
- Standard38 pagesEnglish language
sale 15% off
This document applies to the testing of surfaces that may become contaminated by radioactive materials. The ease of decontamination is a property of a surface and an important criterion for selecting surface materials used in the nuclear industry, interim storage or disposal facilities from which contamination can be removed easily and rapidly without damaging the surface. The test described in this document is a rapid laboratory-based method to compare the ease of decontamination of different s...view more
- Standard34 pagesFrench language
sale 15% off- Standard34 pagesEnglish language
sale 15% off- Draft34 pagesFrench language
sale 15% off- Draft34 pagesEnglish language
sale 15% off
This document provides guidelines for testing laboratories wanting to use rapid test methods on water samples that may be contaminated following a nuclear or radiological emergency incident. In an emergency situation, consideration should be given to: — taking into account the specific context for the tests to be performed, e.g. a potentially high level of contamination; — using or adjusting, when possible, radioactivity test methods implemented during routine situations to obtain a result rapid...view more
- Standard20 pagesEnglish language
sale 15% off- Standard22 pagesFrench language
sale 15% off- Draft20 pagesEnglish language
sale 15% off
This document specifies the conceptual basis for the determination of ambient dose equivalent for the
evaluation of exposure to cosmic radiation in civilian aircraft and for the calibration of instruments
used for that purpose.
- Standard36 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft36 pagesEnglish language
sale 10% off- e-Library read for1 day
This document specifies the conditions for the determination of uranium isotope activity concentration in samples of environmental water (including sea waters) using alpha-spectrometry and 232U as a yield tracer. A chemical separation is required to separate and purify uranium from a test portion of the sample.
- Standard19 pagesEnglish language
sale 15% off- Standard21 pagesFrench language
sale 15% off- Draft19 pagesEnglish language
sale 15% off
IEC 61031:2020 applies to the design, location and application of installed equipment for monitoring local gamma radiation dose rates within nuclear facilities during normal operation and anticipated operational occurrences. High range area gamma radiation dose rate monitoring equipment for accident conditions currently addressed by IEC 60951-1 and IEC 60951-3 is not within the scope of this document. This document does not apply to the measurement of neutron dose rate. Additional equipment for ...view more
- Standard22 pagesEnglish language
sale 15% off
The primary purpose of this document is to provide minimum acceptable criteria required to establish a procedure for retrospective dosimetry by electron paramagnetic resonance spectroscopy and to report the results. The second purpose is to facilitate the comparison of measurements related to absorbed dose estimation obtained in different laboratories. This document covers the determination of absorbed dose in the measured material. It does not cover the calculation of dose to organs or to the b...view more
- Standard19 pagesEnglish language
sale 15% off- Standard21 pagesFrench language
sale 15% off- Draft19 pagesEnglish language
sale 15% off
The purpose of this document is to provide minimum criteria required for quality assurance and quality control, evaluation of the performance and to facilitate the comparison of measurements related to absorbed dose estimation obtained in different laboratories applying ex vivo X-band EPR spectroscopy with human tooth enamel. This document covers the determination of absorbed dose in tooth enamel (hydroxyapatite). It does not cover the calculation of dose to organs or to the body. This document ...view more
- Standard22 pagesEnglish language
sale 15% off- Draft22 pagesEnglish language
sale 15% off
This document specifies methods and procedures for characterizing the responses of devices used for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft. The methods and procedures are intended to be understood as minimum requirements.
- Standard36 pagesEnglish language
sale 15% off- Standard37 pagesFrench language
sale 15% off- Draft36 pagesEnglish language
sale 15% off
This document specifies the conceptual basis for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft and for the calibration of instruments used for that purpose.
- Standard27 pagesEnglish language
sale 15% off- Standard29 pagesFrench language
sale 15% off- Draft27 pagesEnglish language
sale 15% off
This document specifies the different leakage test methods for sealed sources. It gives a comprehensive set of procedures using radioactive and non-radioactive means. This document applies to the following situations: — leakage testing of test sources following design classification testing in accordance with ISO 2919[1]; — production quality control testing of sealed sources; — periodic inspections of the sealed sources performed at regular intervals, during the working life. Annex A of this do...view more
- Standard13 pagesEnglish language
sale 15% off- Standard14 pagesFrench language
sale 15% off- Draft12 pagesEnglish language
sale 15% off
IEC 62963:2020 describes the technical requirements, test methods, inspection requirements, markings and labelling, and requirements on the accompanying documents, packaging, shipping and storage for X-ray security inspection systems that inspect bottled or canned liquids (hereinafter referred to as "the system") based on X-ray computed tomography (CT). Here, the system is limited to those that feature tomographic scanning, not standard X-ray projection. This document is applicable to liquids, a...view more
- Standard54 pagesEnglish and French language
sale 15% off
The use of a continuous air monitor (CAM) is mainly motivated by the need to be alerted quickly and in the most accurate way possible with an acceptable false alarm rate when significant activity concentration value is exceeded, in order to take appropriate measures to reduce exposure of those involved. The performance of this CAM does not only depend on the metrological aspect characterized by the decision threshold, the limit of detection and the measurement uncertainties but also on its dynam...view more
- Technical report32 pagesFrench language
sale 15% off- Technical report32 pagesEnglish language
sale 15% off
The use of a continuous air monitor (CAM) is mainly motivated by the need to be alerted quickly and in the most accurate way possible with an acceptable false alarm rate when a significant activity concentration value is exceeded, in order to take appropriate measures to reduce exposure of those involved. The performance of this CAM does not only depend on the metrological aspect characterized by the decision threshold, the limit of detection and the measurement uncertainties but also on its dyn...view more
- Technical report54 pagesFrench language
sale 15% off- Technical report52 pagesEnglish language
sale 15% off
This document contains the terms, definitions, notes to entry and examples corresponding to the basic concepts of the nuclear energy, nuclear technologies, and radiological protection subject fields. It provides the minimum essential information for each cross-cutting concept represented by a single term. NOTE A full understanding of concepts goes with a background knowledge of nuclear energy, nuclear technologies, and radiological protection. It is intended to facilitate communication and promo...view more
- Standard19 pagesEnglish language
sale 15% off
2020-01-08 CV: BT decision (D164/C119) to proceed to publication without link to legislation
2019-11-07 mah: consultant assessment missing: blocked.
2019-11-12 - JO: BT document to remove link to the MDD under review
- Amendment20 pagesEnglish language
sale 10% off- e-Library read for1 day
2020-03-17-JO- BT decision BT164/DG11529/DV to remove the link to the MDD (93/42/EEC)
Publication on hold due to negative assessment
- Amendment8 pagesEnglish language
sale 10% off- e-Library read for1 day
EN-IEC 62311 applies to electronic and electrical equipment for which no dedicated product standard or product family standard regarding human exposure to electromagnetic fields applies. It covers equipment with intentional or non-intentional radiators as well as a combination thereof. This document provides assessment methods and criteria to evaluate equipment against limits on exposure of people related to electric, magnetic and electromagnetic fields. The frequency range covered is from 0 Hz ...view more
- Standard37 pagesEnglish language
sale 10% off- e-Library read for1 day