55.100 - Bottles. Pots. Jars

This document specifies dimensions of a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 g per litre.
NOTE   Carbonation ≥ 1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and packer/filler.

This document specifies the dimensions of the 26 mm shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown closure (see Cetie data sheet EC1-02 [2]).

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

This technical standard specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

This document gives specifications for the 26 millimetres intermediate depth crown cap, lined with a plastic gasket and designed to seal bottles conforming typically but not exclusively to ISO 12821 and ISO 12822 standards for pry-off and pr EN (WI 00261441) and pr EN (WI 00261442) for twist-off.
It specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application.
The gasket material and profile are not specified as a nu...view more

This document specifies the dimensional requirements for the 26 mm diameter, 6 mm height crown cap, lined with a plastic gasket and designed to seal bottles with neck finishes foreseen for pry-off or twist-crown applications.
It specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application.
The gasket material and profile are not specified as a number of different profiles are available depending on the end use and supplier...view more

This European Standard specifies the dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 2.0 g CO2/l, for use with natural corks.

This document specifies a test method to measure the global migration of cork stoppers. It is applicable to all types of cork stoppers that are ready to use, simulating the real conditions of use. This includes all kind of cork stoppers (completely or partially inserted in the bottle neck). A bottle with an adequate finish is used to carry out the test.

This European Standard specifies the dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 1,2 g CO2/l, for use with natural corks.

ISO 10718:2015 specifies a method to enumerate the colony-forming units of yeasts, moulds and bacteria which can exist on cork stoppers and in an alcoholic solution, and which, under certain conditions, can be extracted during the 3 months following delivery. ISO 10718:2015 applies to all types of ready-to-use cork stoppers, submitted to a sanitation process and packaged in properly aseptic and hermetic conditions. ISO 10718:2015 specifies the limit values of the colony-forming units of yeasts, ...view more

This International Standard specifies the tolerances for the bottles intended to be used for pharmaceutical
products, cosmetic and perfumery products and chemical products.
The following tolerances are concerned:
— brimful capacity;
— height;
— diameter and width;
— verticality.
The following types of bottles are excluded from this International Standard:
— “miniatures”;
— small bottles for extracts, essences, etc.;
— small jars (e.g. individual portions of jam).

ISO 12818:2013 specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. The tolerances concerned are brimful capacity, height, diameter and width, and verticality.

This document specifies the design and dimensions of the screw PET finish BVS 30H60 for the closure of wines with CO2 content below 1,2 grams per litre.
This finish is designed to take an aluminium tamper-evident closure with extended skirt which is reformed during application or a screw plastic closure (with or without metallic shell).

This document specifies the design and dimensions of the 29 mm screw finish with three (3) thread starts for
flat waters and non-carbonated beverages. This finish is designated PET finish 29/25 (12,6).
This finish can be used for aseptic filling and filling with introduction of nitrogen (internal overpressure inferior to 1 bar max). The dimension (12,6) is the height in millimetres from the top of finish to the bottom of the support ledge.
This finish is designed to accept a tamper eviden...view more

This document specifies the design and dimensions of the 26 mm screw finish with three thread starts for
flat waters and non-carbonated beverages.
This finish can be used for aseptic filling and filling with introduction of nitrogen (internal overpressure inferior to 1 bar max).
The dimension (12,0) is the height in millimetres from the top of finish to the bottom of the support ledge.
This finish is designed to accept a tamper evident plastic closure only. During first opening, the ta...view more

This European Standard specifies the design and dimensions of the 26 mm screw finish with three thread starts for flat waters and non-carbonated beverages.
This finish can be used for aseptic filling and filling with introduction of nitrogen (internal overpressure inferior to 1 bar max).
The dimension (12,0) is the height in millimetres from the top of finish to the bottom of the support ledge.
This finish is designed to accept a tamper evident plastic closure only. During first opening, the ...view more

This European Standard specifies the design and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish is designated PET finish 29/25 (12,6).
This finish can be used for aseptic filling and filling with introduction of nitrogen (internal overpressure inferior to 1 bar max). The dimension (12,6) is the height in millimetres from the top of finish to the bottom of the support ledge.
This finish is designed to accept a tamper ev...view more