Packaging - Rigid plastic containers - PET finish BVS 30H60

This document specifies the design and dimensions of the screw PET finish BVS 30H60 for the closure of wines with CO2 content below 1,2 grams per litre.
This finish is designed to take an aluminium tamper-evident closure with extended skirt which is reformed during application or a screw plastic closure (with or without metallic shell).

Verpackung - Formstabile Kunststoffbehälter - PET-Verschlussmundstück BVS 30H60

Dieses Dokument legt die Konstruktion und die Maße für das PET-Schraubverschlussmundstück BVS 30H60 zum Verschluss von Weinen mit einem CO2-Gehalt unter 1,2 g je Liter fest.
Dieses Verschlussmundstück ist ausgelegt für die Aufnahme eines Aluminiumverschlusses mit erweitertem Rand mit Originalitätssicherung, der während des Aufbringens neu geformt wird, oder eines Kunststoff-Schraub¬verschlusses (mit oder ohne Metallkappe).

Emballage - Conteneurs plastiques rigides - Bague PET BVS 30H60

Le présent document définit la conception et les dimensions de la bague à vis BVS 30H60 en PET pour le bouchage des vins dont la teneur en CO2 est inférieure à 1,2 gramme par litre.
Cette bague est prévue pour recevoir une capsule aluminium avec témoin d’effraction et jupe longue dont la pose s’effectue avec un ré-emboutissage, ou une capsule plastique vissée (avec ou sans capsule métallique).

Embalaža - Toge plastične posode - PET-grla BVS 30H60

Ta dokument določa zasnovo in mere za navojno grlo PET BVS 30H60 za zapiranje embalaže z vinom z vsebnostjo CO2 pod 1,2 grama na liter. Grlu se lahko doda aluminijast čep s podaljšanim obrobkom, ki varuje pred nedovoljenim odpiranjem in ki se med uporabo preoblikuje, ali navojni plastični čep (s kovinskim oklopom ali brez njega).

General Information

Status
Published
Public Enquiry End Date
19-Aug-2013
Publication Date
04-Dec-2014
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Nov-2014
Due Date
23-Jan-2015
Completion Date
05-Dec-2014

Buy Standard

Standard
SIST EN 16593:2015
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Formstabile Kunststoffbehälter - PET-Verschlussmundstück BVS 30H60Emballage - Conteneurs plastiques rigides - Bague PET BVS 30H60Packaging - Rigid plastic containers - PET finish BVS 30H6055.100Steklenice. Lonci. KozarciBottles. Pots. JarsICS:Ta slovenski standard je istoveten z:EN 16593:2014SIST EN 16593:2015en,fr,de01-januar-2015SIST EN 16593:2015SLOVENSKI

STANDARD
SIST EN 16593:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16593
October 2014 ICS 55.100 English Version
Packaging - Rigid plastic containers - PET finish BVS 30H60
Emballage - Récipients en plastique rigide - Bague PET BVS 30H60

Verpackung - Formstabile Kunststoffbehälter - PET-Verschlussmundstück BVS 30H60 This European Standard was approved by CEN on 6 September 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16593:2014 ESIST EN 16593:2015

EN 16593:2014 (E) 2 Contents Page Foreword ..............................................................................................................................................................3 Introduction .........................................................................................................................................................4 1 Scope ......................................................................................................................................................5 2 Dimensions .............................................................................................................................................5 3 Requirements .........................................................................................................................................5 Bibliography ..................................................................................................................................................... 12

SIST EN 16593:2015

EN 16593:2014 (E) 3 Foreword This document (EN 16593:2014) has been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2015, and conflicting nationa

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.