ISO/TC 63 - Glass containers

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

ISO 12818:2013 specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. The tolerances concerned are brimful capacity, height, diameter and width, and verticality.

ISO 9058:2008 specifies tolerances for glass bottles of circular cross-section and nominal capacity from 50 ml to 5 000 ml.

ISO 9100-4:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm medium for wide-mouth glass containers.

ISO 9100-2:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 33 mm medium for wide-mouth glass containers.

ISO 9100-3:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 38 mm regular for wide-mouth glass containers.

ISO 9100-6:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 53 mm and 58 mm regular for wide-mouth glass containers.

ISO 9100-7:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 58 mm deep for wide-mouth glass containers.

ISO 9100-5:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 43 mm and 48 mm regular for wide-mouth glass containers.

ISO 9100-9:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm deep for wide-mouth glass containers.

ISO 9100-8:2005 specifies the dimensions of vacuum lug finishes with nominal sizes of 63, 66 and 70 mm regular for wide-mouth glass containers.

ISO 9100-14:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 110 mm regular for wide-mouth glass containers.

ISO 9100-1:2005 specifies the types of vacuum lug finishes for glass containers for ISO 9100-2 to ISO 9100-14.

ISO 9100-12:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 89 mm regular for wide-mouth glass containers.

ISO 9100-10:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 77 mm regular for wide-mouth glass containers.

ISO 9100-13:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 100 mm regular for wide-mouth glass containers.

ISO 9100-11:2005 specifies the dimensions of a vacuum lug finish with a nominal size of 82 mm regular for wide-mouth glass containers.

ISO 8106:2004 specifies a gravimetric method for determining the capacity of glass containers and their compliance with specification limits.

ISO 8113:2004 specifies a method for determination of the resistance of glass containers to external force in the direction of the vertical axis.

ISO 7458:2004 specifies two test methods for the determination of the internal pressure resistance of glass containers, Method A by application of uniform internal pressure for a predetermined period and Method B by application of internal pressure increasing at a predetermined constant rate.

ISO 7459:2004 specifies test methods for determining the thermal shock resistance and thermal shock endurance of glass containers. It does not apply to the determination of properties of laboratory glassware.

Specifies test methods. Describes the principle, the apparatus, the sampling, the test procedure, the expression of results, and the contents of the test report.

Specifies two complementary methods for the determination of the deviation from flatness. Describes the principle, the apparatus, the sampling, the test procedure, the expression of results, and the contents of the test report.

Specifies a test method which determines not only the deviation of the whole body from the vertical, but also the combined effect of various deformations which may also be present.

Specifies the dimensions which shall be in accordance with figure 1. All untoleranced dimensions are nominal.

ISO 12822:2015 specifies the dimensions of the 26 mm shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown closure (see CE.T.I.E. data sheet EC1-02 revision 1).

ISO 12821:2013 specifies the dimensions of the 26-mm-tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown closure.

All untoleranced dimensions specified are nominal. The glass thickness throughout the full depth of the finish shall be adequate to withstand normal handling. The finish shall be free from cracks likely to have an adverse effect on sealing performance.

Specifies tolerances for glass containers of circular cross-section and nominal capacity from 50 ml to 5 000 ml.

Specifies the dimensions of a series of pilferproof finishes of glass containers for non-pressurized drinks and other products. Three figures illustrate details of shapes.

Specifies the dimensions of Euro-form bottles, made of amber or green glass, with a tall crown cork finish, according to ISO 8162, and having a brimful capacity of 520 ml. A figure illustrates the details of shape.

In a drawing all needed dimensions on beverage bottles are given with untoleranced as nominal ones. Additionally the definitions given in ISO 7348 shall apply.

The brimfull and filling capacity is calculated from the mass of the water filling the container, adjusted ba a factor for temperature and density of the water. Apparatus and procedure are described including measurement accuracy and volume correction factors.

All needed dimensions on beverage bottles are given in a drawing, untoleranced ones being nominal. Additionaly the definitions given in ISO 7348 shall apply.

A method if inspection and determination of the resistance of glass containers to external force in the direction of the axis is specified. The pass tests are intended especially for containers the resistance of which is specified. The press with two horizontal flat steel pressure plates and the test method are specified.

Two methods are specified for the determination: In method A an uniform internal pressure is used for a predetermined period and in method B an internal pressure increasing at a constant rate will be applied. For both methods the procedure, apparatus and test report, resp., are specified.

The containers are subjected to a sudden change temperature, i.e. to cold and hot bath, for determing their performance. Apparatus, sampling and procedures are specified. The requirements apply only to containers made of soda-silica glass.