77.140.99 - Other iron and steel products

This document specifies switch and crossing rails that carry railway wheels as specified in ISO 5003. These are used in conjunction with flat bottom (vignole) railway rails. After switch and crossing rails are produced, in order to be ready for railway track use, secondary processing (forging, grinding and heat treatment etc.) is carried out. This document does not include secondary processing. Secondary processing is specified in other standards or through agreements between manufacturer and pu...view more

This European Standard specifies the minimum requirements for swage terminals and the securing of such terminals by a swaging process to carbon steel rope conforming to EN 12385-4 and EN 12385-5, spiral strand rope conforming to EN 12385-10 and stainless steel stranded rope. This European Standard is not applicable to spiral rope incorporating full lock wires - see EN 12385-10 -, nor ropes with coverings and /or fillings (see 3.6.3 of EN 12385-2:2002+A1:2008). This European Standard is applicabl...view more

This European Standard specifies the minimum requirements for swage terminals and the securing of such terminals by a swaging process to carbon steel rope conforming to EN 12385-4 and EN 12385-5, spiral strand rope conforming to EN 12385-10 and stainless steel stranded rope.
This European Standard is not applicable to spiral rope incorporating full lock wires - see EN 12385-10 -, nor ropes with coverings and /or fillings (see 3.6.3 of EN 12385-2:2002+A1:2008).
This European Standard is applica...view more

This European Standard specifies the minimum requirements for the molten metal and resin socketing of steel wire ropes within the scopes of EN 12385-4:2002+A1:2008; EN 12385-5:2002; EN 12385-6:2004; EN 12385-7:2002; EN 12385-8:2002; EN 12385-9:2002 and EN 12385-10:2003+A1:2008. The European Standard is applicable only to those requirements that ensure that the socketing is strong enough to withstand a force of at least 100 % of the minimum breaking force of the rope (i.e. socket termination effi...view more

This European Standard specifies the minimum requirements for the molten metal and resin socketing of steel wire ropes within the scopes of EN 12385-4:2002+A1:2008; EN 12385-5:2002; EN 12385-6:2004;
EN 12385-7:2002; EN 12385-8:2002; EN 12385-9:2002 and EN 12385-10:2003+A1:2008.
The European Standard is applicable only to those requirements that ensure that the socketing is strong enough to withstand a force of at least 100 % of the minimum breaking force of the rope (i.e. socket termination ...view more

This European Standard deals with the requirements for the ferrule-securing of eyes and endless loops.
It also deals with the requirements for ferrules for the ferrule-securing of eyes and endless loops.
This European Standard applies to the ferrule-securing of eye terminations formed either by a Flemish eye or turn-back eye and covers ferrules made of non alloy carbon steel and aluminium.
This European Standard applies to slings and assemblies using steel wire ropes for general lifting appli...view more

This European Standard has been prepared to provide a means of conforming with the essential safety requirements of the Machinery Directive and associated EFTA Regulations.
Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates a quality assurance system applicable to the relevant part of this standard (e.g. EN ISO 9001) to ensure themselves that products claimed to comply consistently achieve the required level of quality.

This European Standard specifies the minimum requirements for non welded general purpose steel thimbles produced from plate having dimensions in accordance with Figure 1. The thimbles are intended to be used in slings made with six or eight strand steel wire ropes from 8 mm to 60 mm diameter complying with EN 12385-4.
Reeving thimbles and solid thimbles are not covered by this standard.
The hazards covered by this standard are identified in clause 4.

This European Standard specifies the minimum requirements, for asymmetrical wedge socket terminations for stranded steel wire ropes.
Examples of the construction and sizes of two separate designs of asymmetric wedge sockets are given in informative annexes A and B.
The informative annex C gives recommendations for safe use and inspection.
This European Standard deals with all significant hazards, hazardous situations and events relevant to asymmetric wedge sockets for terminations for steel w...view more

This standard specifies minimum requirements for the splicing of eye terminations for six or eight strand steel wire ropes of up to 60 mm diameter complying with prEN 12385-4 used for slings to ensure that the spliced eye is strong enough to withstand a force of at least 80 % of the minimum breaking load of the rope.
Other hazards covered by this standard are identified in clause 4. Resistance to fatigue loading is not considered to be a significant hazard for slings and is not covered by this ...view more

This European Standard specifies the minimum requirements for symmetrical wedge socket terminations for stranded steel wire ropes conforming to EN 12385-5 for lifts.
This European Standard covers those symmetric wedge sockets intended for use at temperatures between
-20 °C and 100 °C.
This European Standard only covers those symmetric wedge sockets that have welded socket bodies.
An example of the construction and sizes of a symmetric wedge socket is given in informative Annex A.
The infor...view more

ISO 14657:2005 specifies requirements for hot-dip zinc (galvanized) coating on steel reinforcing bars, wire and welded fabric used in the reinforcement of concrete. It specifies three classes, class A, class B and class C coatings, which differ in coating mass. ISO 14657:2005 does not apply to hot-dip zinc-coated reinforcements for prestressing or components of these reinforcements.

Specifies requirements (chemical composition, mechanical properties, appearance and soundness, machining allowance and dimensional tolerances, residual imbalance, marking) for the manufacture and supply of rolled, forged or cast solid wheels of unalloyed steels. Also deals with information to be supplied by the purchaser, classification, manufacture, inspection, delivery. Annnex A describes a procedure for shot peening web surfaces of wheels. In addition, the requirements of ISO 404 are applicab...view more

Specifies requirements (chemical composition, physical and mechanical properties, dimensional characteristics, marking) for the manufacture and supply of rough-rolled tyres of unalloyed steels. Also deals with information to be supplied by the purchaser, classification, inspection, delivery, guarantee. In addition, the requirements of ISO 404 are applicable.

Specifies the dimensional requirements and the surface roughnesses. The corresponding requirements of heavy freight vehicle axles or of axles for speeds under 100 kg/h shall be subject to agreement between the purchaser and manufacturer at the time of enquiry and order. In addition to this requirements, the general technical delivery requirements of ISO 404 apply.

Specifies the dimensional requirements, the surface roughness and the residual unbalance of forged, rolled or cast solid wheels with curved or straight webs in various degrees or finish. In addition to this requirements, the general technical delivery requirements of ISO 404 apply.

Specifies the dimensional requirements, the surface roughness and, as appropriate, the permissible residual static unbalance for tyres, wheel centres and tyred wheels in the various degrees of finish, and in addition the manufacturing requirements for tyred wheels. For quality requirements for tyres and wheel centres and technical delivery requirements see ISO 1005-1, ISO 1005-4, and ISO 404, respectively.

Specifies requirements for the manufacture and supply of rolled or forged wheel centres for tractive and trailing stock, which are suitable for tyring and are made of unalloyed steels in accordance with table 1 and clause 4. Spoked wheel centres are not covered. In addition to this part of ISO 1005, the requirements of ISO 404 are applicable.

Specifies the requirements for the assembly by press fitting or shrink fitting onto axles of solid wheels, wheel centres and other components. It also specifies the dimensions and tolerances of the completed assembly and the conditions of inspection and supply. Applies to certain types of axles and wheels, to plain or roller axle box bearings and to plain or roller traction motor bearings.