91.060.99 - Other elements of buildings

This test method specifies a method for determining the fire resistance of air transfer grilles(ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is valid for ...view more

This European Standard specifies a method for determining the fire resistance of air transfer grilles (ATG).
It is applicable to air transfer grilles intended for installation in building components (typically walls, floors or ceilings). The orientation of the installation of the air transfer grille can be vertical or horizontal.
The closing mechanism of the air transfer grille can come from expansion of material and/or from any mechanical or electrical closing device.
This test method is val...view more

This part of EN 15080 identifies the parameters and factors that affect the fire resistance of beams and need to be taken into account when considering extended application of results of beams tested in accordance with EN 1365-3. It also gives the methodology to be used when preparing an extended application, including rules and calculation methods which can be applied to establish the resultant influence of a variation in one or more parameters and to determine the field of extended application...view more

This Part of EN 15080 identifies the parameters and factors that affect the fire resistance of beams and need to be taken into account when considering extended application of results of beams tested in accordance with EN 1365-3. It also gives the methodology to be used when preparing an extended application, including rules and calculation methods which can be applied to establish the resultant influence of a variation in one or more parameters and to determine the field of extended application...view more

This Part of EN 1365 specifies a method for determining the fire resistance, in respect with loadbearing capacity and with no separating function, of:
- balconies exposed to the fire from either outside or inside the building; and
- walkways exposed to the fire from either outside or inside the building.
This standard is used in conjunction with EN 1363-1.

This document specifies a method for determining the ability of a covering to protect underlying products against damage during a specified fire exposure.

This part of EN 1365 specifies a method for determining the fire resistance of beams with or without applied fire protection systems and with or without cavities.  This standard is used in conjunction with prEN 1363-1. Beams which are part of a floor construction are tested with the floor construction as described in prEN 1365-2 and are subject to evaluation of integrity and insulation. General guidance on this method of test is given in annex A.

This part of EN 1365 specifies a method for determining the fire resistance of columns when fully exposed to fire on all sides. This standard is used in conjunction with prEN 1363-1. General guidance on this method of test is given in annex A.

Outlines some basic principles for the design of joints in building. These principles fall under three main headings of properties: geometrical, structural and environmental properties of joints.

Specifies the test method to be used in laboratories for assessing the air permeability of non-opening joints between components in the exterior walls of buildings, whether the joints have been subjected to prior ageing or not. Does not apply to joints within components (for example the joint between glass fixed in a window frame and sealed with a glazing compound).

Is one of a series dealing with general rules and principles for the jointing of building components. Establishes a classification system for joints in building based on the ability of joints to accommodate dimensional deviations during construction. Examples of types of joints are given in an annex.

Forms one of a series concerning joints in building. The series includes the following International Standards: ISO 2444 - Joints in building - Vocabulary; ISO 2445 - Joints in building - Fundamental principles for design. Gives a general check-list of functions of joints in building for use in their design.

Specifies the test method to be used in laboratories for assessing the air permeability of non-opening joints between components in the exterior walls of buildings, whether the joints have been subjected to prior ageing or not. Does not apply to joints within components (for example the joint between glass fixed in a window frame and sealed with a glazing compound).

Forms one of a series concerning joints in building. The series includes the following International Standards: ISO 2444 - Joints in building - Vocabulary; ISO 2445 - Joints in building - Fundamental principles for design. Gives a general check-list of functions of joints in building for use in their design.

Outlines some basic principles for the design of joints in building. These principles fall under three main headings of properties: geometrical, structural and environmental properties of joints.

This test method specifies a method for determining the fire resistance of cavity barriers and is to be used in conjunction with EN 1363 1.
This standard is applicable to non-loadbearing vertically or horizontally oriented closed and open cavity barriers, which are used to provide fire separation to uncompartmented or ventilated spaces. Cavity barriers are designed to provide fire separating performance and the test method is therefore based on the standard room fire exposure in EN 1363 1. Open...view more

This test method specifies a method for determining the fire resistance of cavity barriers and is to be used in conjunction with EN 1363 1.
This standard is applicable to non-loadbearing vertically or horizontally oriented closed and open cavity barriers, which are used to provide fire separation to uncompartmented or ventilated spaces. Cavity barriers are designed to provide fire separating performance and the test method is therefore based on the standard room fire exposure in EN 1363 1. Open...view more