M/504 - Fireworks

This European Standard defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories 1, 2 and 3.

This European Standard establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories 1, 2 and 3.

This European Standard specifies minimum labelling requirements for the article and primary or selection packaging of fireworks of the following types: aerial wheels; bangers; batteries and combinations; batteries with external support; Bengal flames; Bengal matches; Bengal sticks; Christmas crackers; combinations; combinations with external support; compound fireworks; crackling granules; double bangers; flash bangers; flash pellets; fountains; ground movers; ground spinners; hand-held sparklers; jumping crackers; jumping ground spinners; mines; mini rockets; non-hand-held sparklers; novelty matches; party poppers; rockets; Roman candles; serpents; shot tubes; snaps; spinners; table bombs; throwdowns; wheels.

This European Standard specifies requirements for the construction, performance and primary packaging of fireworks of category 1, 2 and 3 of the following types: aerial wheels; bangers; batteries and combinations; batteries with external support; Bengal flames; Bengal matches; Bengal sticks; Christmas crackers; combinations; combinations with external support; compound fireworks; crackling granules; double bangers; flash bangers; flash pellets; fountains; ground movers; ground spinners; hand-held sparklers; jumping crackers; jumping ground spinners; mines; mini rockets; non-hand-held sparklers; novelty matches; party poppers; rockets; Roman candles; serpents; shot tubes; snaps; spinners; table bombs; throwdowns; wheels.

This European Standard specifies test methods. It is applicable to fireworks in categories 1, 2 and 3 according to EN 15947-2.

This European Standard specifies requirements for construction, performance and primary or selection packaging of fireworks. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947 2:2015.
This European Standard does not apply for articles containing detonative explosives except for black powder or flash composition.
This European Standard does not apply for articles containing pyrotechnic composition that includes any of the following substances:
-   arsenic or arsenic compounds;
-   hexachlorobenzene;
-   mixtures containing a mass fraction of chlorates greater than 80 %;
-   mixtures of chlorates with metals;
-   mixtures of chlorates with red phosphorus (except when used in Christmas crackers, party poppers or snaps);
-   mixtures of chlorates with potassium hexacyanoferrate(II);
-   mixtures of chlorates with sulfur (these mixtures are allowed for friction heads only);
-   mixtures of chlorates with sulfides;
-   lead or lead compounds;
-   mercury compounds;
-   white phosphorus;
-   picrates or picric acid;
-   potassium chlorate with a mass fraction of bromates greater than 0,15 %;
-   sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;
-   zirconium with a particle size of less than 40 µm.

This European Standard defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories F1, F2 and F3.

This European Standard establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories F1, F2 and F3.

This European Standard specifies minimum labelling requirements for the article and primary or selection packaging of fireworks. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947-2:2015.

This European Standard specifies test methods. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947 2:2015.

This European Standard defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories F1, F2 and F3.

This European Standard specifies minimum labelling requirements for the article and primary or selection packaging of fireworks. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947-2:2015.

This European Standard specifies requirements for construction, performance and primary or selection packaging of fireworks. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947 2:2015.
This European Standard does not apply for articles containing detonative explosives except for black powder or flash composition.
This European Standard does not apply for articles containing pyrotechnic composition that includes any of the following substances:
-   arsenic or arsenic compounds;
-   hexachlorobenzene;
-   mixtures containing a mass fraction of chlorates greater than 80 %;
-   mixtures of chlorates with metals;
-   mixtures of chlorates with red phosphorus (except when used in Christmas crackers, party poppers or snaps);
-   mixtures of chlorates with potassium hexacyanoferrate(II);
-   mixtures of chlorates with sulfur (these mixtures are allowed for friction heads only);
-   mixtures of chlorates with sulfides;
-   lead or lead compounds;
-   mercury compounds;
-   white phosphorus;
-   picrates or picric acid;
-   potassium chlorate with a mass fraction of bromates greater than 0,15 %;
-   sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;
-   zirconium with a particle size of less than 40 µm.

This European Standard establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories F1, F2 and F3.

This European Standard specifies minimum labelling requirements for the article and primary or selection packaging of fireworks. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947-2:2015.

This document specifies requirements for construction and performance of firework and primary packs and selection packs. It is applicable to firework of the categories F1, F2 and F3 as defined by Article 6 Paragraph (1) Clause (a) (i) to (iii) of Directive 2013/29/EU and described in FprEN 15947-2:2021.
This document is not applicable for fireworks containing detonative explosives other than black powder or flash composition or pyrotechnic composition that includes any of the following substances:
-   arsenic or arsenic compounds;
-   hexachlorobenzene;
-   lead or lead compounds;
-   mixtures containing a mass fraction of chlorates greater than 80 %;
-   mixtures of chlorates with metals;
-   mixtures of chlorates with red phosphorus (except when used in Christmas crackers, party poppers or snaps);
-   mixtures of chlorates with potassium hexacyanoferrate (II);
-   mixtures of chlorates with sulphur (these mixtures are allowed for friction heads only);
-   mixtures of chlorates with sulphides;
-   mercury compounds;
-   nitrocellulose with a mass fraction of nitrogen of more than 12,6 %.
-   picrates or picric acid;
-   potassium chlorate with a mass fraction of bromates greater than 0,15 %;
-   sulphur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;
-   white phosphorus;
-   zirconium with a particle size of less than 40 µm.
This document does not apply to fireworks intended to be kept or used at temperatures below −20 °C or above 50 °C.

This document establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories F1, F2 and F3 as defined by Article 6 Paragraph (1) Clause (a) (i) to (iii) of Directive 2013/29/EU, and given in the following:
-   aerial wheel (only category F3);
-   banger (only categories F2 and F3);
-   battery and battery requiring external support (only categories F2 and F3);
-   Bengal flame (only category F1);
-   Bengal match (only category F1);
-   Bengal stick (only categories F1 and F2);
-   Christmas cracker (only category F1);
-   combination and combination requiring external support (only categories F2 and F3);
-   compound firework (only categories F2 and F3);
-   crackling granule (only categories F1 and F2);
-   double banger (only category F2);
-   flash banger (only categories F2 and F3);
-   flash pellet (only categories F1 and F2);
-   fountain (categories F1, F2 and F3);
-   ground mover (only category F2);
-   ground spinner (only categories F1 and F2);
-   hand-held sparkler (only categories F1 and F2);
-   jumping cracker (only category F2);
-   jumping ground spinner (only category F2);
-   mine (only categories F2 and F3);
-   mini rocket (only category F2);
-   non hand-held sparkler (only categories F1 and F2);
-   novelty match (only category F1);
-   party popper (only category F1);
-   report rocket (only category F3);
-   rocket (only categories F2 and F3);
-   Roman candle (only categories F2 and F3);
-   senko-hanabi (only category F1);
-   serpent (only category F1);
-   shot tube (only category F2 and F3);
-   snap (only category F1);
-   spinner (only category F2);
-   table bomb (only category F1);
-   throwdown (only category F1);
-   wheel (only category F2 and F3).

This document specifies minimum labelling requirements for the article and primary or selection pack of fireworks. It is applicable to fireworks of the categories F1, F2 and F3 as defined by Article 6 Paragraph (1) clause (a) subclause (i) to (iii) of Directive 2013/29/EU.

This document specifies test methods. It is applicable to fireworks of the categories F1, F2 and F3 as defined by Article 6 Paragraph (1) Clause (a) (i) to (iii) of Directive 2013/29/EU.

This document defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories F1, F2 and F3 as defined by Article 6 Paragraph (1) Clause a) subclause i) to iii) of Directive 2013/29/EU.