2013/29/EU - Directive 2013/29/EU of the European Parliament and of the Council of 12 June 2013 on the harmonisation of the laws of the Member States relating to the making available on the market of pyrotechnic articles (recast)

This document provides guidance on auditing management systems, including the principles of auditing,
managing an audit programme and conducting management system audits, as well as guidance on
the evaluation of competence of individuals involved in the audit process. These activities include the
individual(s) managing the audit programme, auditors and audit teams.
It is applicable to all organizations that need to plan and conduct internal or external audits of
management systems or manage an audit programme.
The application of this document to other types of audits is possible, provided that special consideration
is given to the specific competence needed.

This European Standard defines the terms and specifies the requirements, means of categorisation, test methods, minimum labelling requirements and instructions for use, for ignition devices (except ignition devices for pyrotechnic articles for vehicles) of the following generic types:
-  igniters;
-  components for pyrotechnic trains;
-  pyrotechnic Cords and fuses;
-  delay fuses;
-  fuzes.
NOTE   Safety fuses are subject to Directive 93/15/EEC and therefore not considered in this European Standard.
This European Standard does not apply for articles containing pyrotechnic compositions that include any of the following substances:
-  arsenic or arsenic compounds;
-  polychlorobenzenes;
-  mercury compounds;
-  white phosphorus;
-  picrates or picric acid.
This European Standard does not apply to pyrotechnic articles containing blasting agents and military explosives except black powder and flash composition.

This European Standard defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories 1, 2 and 3.

This European Standard specifies minimum labelling requirements for the article and primary or selection packaging of fireworks of the following types: aerial wheels; bangers; batteries and combinations; batteries with external support; Bengal flames; Bengal matches; Bengal sticks; Christmas crackers; combinations; combinations with external support; compound fireworks; crackling granules; double bangers; flash bangers; flash pellets; fountains; ground movers; ground spinners; hand-held sparklers; jumping crackers; jumping ground spinners; mines; mini rockets; non-hand-held sparklers; novelty matches; party poppers; rockets; Roman candles; serpents; shot tubes; snaps; spinners; table bombs; throwdowns; wheels.

This European Standard establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories 1, 2 and 3.

This European Standard specifies test methods. It is applicable to fireworks in categories 1, 2 and 3 according to EN 15947-2.

This European Standard specifies requirements for the construction, performance and primary packaging of fireworks of category 1, 2 and 3 of the following types: aerial wheels; bangers; batteries and combinations; batteries with external support; Bengal flames; Bengal matches; Bengal sticks; Christmas crackers; combinations; combinations with external support; compound fireworks; crackling granules; double bangers; flash bangers; flash pellets; fountains; ground movers; ground spinners; hand-held sparklers; jumping crackers; jumping ground spinners; mines; mini rockets; non-hand-held sparklers; novelty matches; party poppers; rockets; Roman candles; serpents; shot tubes; snaps; spinners; table bombs; throwdowns; wheels.

This European Standard specifies requirements for construction, performance and primary or selection packaging of fireworks. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947 2:2015.
This European Standard does not apply for articles containing detonative explosives except for black powder or flash composition.
This European Standard does not apply for articles containing pyrotechnic composition that includes any of the following substances:
-   arsenic or arsenic compounds;
-   hexachlorobenzene;
-   mixtures containing a mass fraction of chlorates greater than 80 %;
-   mixtures of chlorates with metals;
-   mixtures of chlorates with red phosphorus (except when used in Christmas crackers, party poppers or snaps);
-   mixtures of chlorates with potassium hexacyanoferrate(II);
-   mixtures of chlorates with sulfur (these mixtures are allowed for friction heads only);
-   mixtures of chlorates with sulfides;
-   lead or lead compounds;
-   mercury compounds;
-   white phosphorus;
-   picrates or picric acid;
-   potassium chlorate with a mass fraction of bromates greater than 0,15 %;
-   sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %;
-   zirconium with a particle size of less than 40 µm.

This European Standard specifies minimum labelling requirements for the article and primary or selection packaging of fireworks. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947-2:2015.

This European Standard specifies test methods. It is applicable to fireworks in categories F1, F2 and F3 according to EN 15947 2:2015.

This European Standard establishes a system for dividing fireworks into categories and types. It is applicable to fireworks in categories F1, F2 and F3.

This European Standard defines various terms relating to the design, construction, primary packaging and testing of fireworks of categories F1, F2 and F3.

This European Standard defines various terms relating to the design, construction, performances, labelling and testing of other pyrotechnic articles as defined by Directive 2007/23/EC on the placing on the market of pyrotechnic articles (except pyrotechnic articles for vehicles, cartridges for powder actuated tools and ignition devices).

This European Standard defines the procedure for categorization of other pyrotechnic articles except pyrotechnic articles for vehicles, ignition devices and cartridges for powder actuated tools (PAT).

This European Standard specifies test methods for other pyrotechnic articles (except pyrotechnic articles for vehicles, cartridges for powder actuated tools and ignition devices).

This European Standard specifies requirements for the construction and performances of other pyrotechnic articles, except pyrotechnic articles for vehicles, ignition devices and cartridges for powder actuated tools (PAT), of the following generic types:
-   flares;
-   flash devices;
-   gas generators;
-   heaters;
-   other cartridges;
-   pyromechanical devices;
-   rockets and rocket motors;
-   semi-finished pyrotechnic articles;
-   smoke / aerosol generators;
-   sound emitters;
-   pyrotechnic liquid dispersers.
This European Standard does not apply for articles containing pyrotechnic compositions that include any of the following substances:
-   arsenic or arsenic compounds;
-   polychlorobenzenes;
-   mercury compounds;
-   lead compounds (except for those included in ignition devices);
-   white phosphorus;
-   picrates or picric acid.
This European Standard does not apply to pyrotechnic articles that contain detonative explosives other than black powder and/or flash composition, if these detonative explosives:
-   can be easily extracted from the pyrotechnic article, or;
-   can initiate secondary explosives, or;
-   can function in a detonative manner although the article is not designed to detonate and the article belongs to the category P2.

This European Standard specifies the minimum labelling requirements and the mandatory instructions for use for other pyrotechnic articles (except pyrotechnic articles for vehicles, cartridges for powder actuated tools and ignition devices).

This European Standard defines the procedures for classifying, testing and labelling of cartridges for powder actuated tools (PAT cartridges), as defined in Clause 3 of this standard.
This European Standard does not apply to pyrotechnic articles containing blasting agents and military explosives except black powder and flash composition.
PAT cartridges contain pyrotechnic composition(s) delivering mainly gases, intended to propel a piston. The piston propels fasteners (e.g. nails) or drives hard marking characters into appropriate materials.
This standard also applies to PAT cartridges sold to persons younger than 18 years, if this is permitted by the member state due to the low hazard of the PAT cartridges.
NOTE   PAT cartridges can also be used for hard marking tools. Information on cartridge operated fixing and hard marking tools can be found in EN 15895:2011.
This European Standard applies to the cartridges listed in Table 1.
(...)

This part of ISO 14451 specifies the types and order of tests to be applied to the semi finished products and sets out the acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

This European Standard defines various terms relating to the design, construction, primary packaging and testing of theatrical pyrotechnic articles and specifies their generic types.

This European Standard specifies requirements for the construction, performance and protective packaging of Category 4 fireworks, as listed in EN 16261-1. This European Standard does not apply for articles containing pyrotechnic compositions that include any of the following substances: - arsenic or arsenic compounds; - polychlorobenzenes; - lead or lead compounds; - mercury compounds; - white phosphorus; - picrates or picric acid. This European Standard does not apply for articles containing military explosives or commercial blasting agents except for black powder or flash composition. In addition, any European regulation regarding forbidden substances should be taken into account.

This European Standard specifies test methods for fireworks of category 4.

This European Standard defines the procedures for placing generic types, subtypes or individual items of theatrical pyrotechnic articles into the appropriate Categories, T1 or T2 and lists them.

This European Standard specifies requirements for the construction, performance and primary packaging of theatrical pyrotechnical artThis European Standard does not apply for articles containing military explosives or commercial blasting agents except for black powder or flash composition. This European Standard does not apply for articles containing pyrotechnic composition that include any of the following substances: - arsenic or arsenic compounds; - polychlorobenzenes; - lead or lead compounds; - mercury compounds; - white phosphorus; - picrates or picric acid.icles of the generic types defined in EN 16256-1:2012, Clause 3.

This European Standard specifies minimum labelling requirements for the article and primary packaging and for the instructions for use of theatrical pyrotechnic articles of the generic types defined in EN 16256-1:2012, Clause 3.

This European Standard specifies test methods. It is applicable to theatrical pyrotechnic articles which are classified in categories T2, T1 outdoor and T1 indoor according to Part 2.

This Standard establishes uniform test methods for pyrotechnic articles for vehicles.

This part of ISO 14451 specifies the types and order of tests to be applied to the igniter and sets out the acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

This part of ISO 14451 specifies the types and order of tests to be applied to the actuators and sets out the associated acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles conaining military explosives or commercial blasting agents except for black powder or flash composition.

This part of ISO 14451 specifies the types and order of tests to be applied to the airbag gas generators and sets out the acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

This Standard establishes a terminology related to test methods and requirements for pyrotechnic articles for vehicles.

This Standard specifies labelling requirements for pyrotechnic articles for vehicles.

This part of ISO 14451 specifies the types and order of tests to be applied to micro gas generators and sets out the associated acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

This part of ISO 14451 specifies the types and order of tests for application to the airbag modules and sets out the acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles containing military explosives or commerical blasting agents except for black powder or flash composition.

This part of ISO 14451 specifies the types and order of tests to be applied to the seatbelt pretensioners and sets out the associated acceptance criteria and means of categorization. This part of ISO 14451 applies to type tests. This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

ISO 14551-6:2013 specifies the types and order of tests for application to the airbag modules and sets out the acceptance criteria and means of categorization.
ISO 14551-6:2013 applies to type tests.
ISO 14551-6:2013 is not applicable to articles containing military explosives or commerical blasting agents except for black powder or flash composition.

ISO 14451-2:2013 establishes uniform test methods for pyrotechnic articles for vehicles.

ISO 14451-1:2013 establishes a terminology related to test methods and requirements for pyrotechnic articles for vehicles.

ISO 14451-9:2013 specifies the types and order of tests to be applied to the actuators and sets out the associated acceptance criteria and means of categorization.
ISO 14451-9:2013 applies to type tests.
ISO 14451-9:2013 is not applicable to articles conaining military explosives or commercial blasting agents except for black powder or flash composition.

ISO 14454-3:2013 specifies labelling requirements for pyrotechnic articles for vehicles.

ISO 14451-5:2013 specifies the types and order of tests for application to the airbag gas generators and sets out the acceptance criteria and means of categorization.
ISO 14451-5:2013 applies to type tests.
ISO 14451-5:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

ISO 14451-10:2013 specifies the types and order of tests to be applied to the semi finished products and sets out the acceptance criteria and means of categorization.
ISO 14451-10:2013 applies to type tests.
ISO 14451-10:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

ISO 14451-7:2013 specifies the types and order of tests to be applied to the seatbelt pretensioners and sets out the associated acceptance criteria and means of categorization.
ISO 14451-7:2013 applies to type tests.
ISO 14451-7:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

ISO 14451-4:2013 specifies the types and order of tests to be applied to micro gas generators and sets out the associated acceptance criteria and means of categorization.
ISO 14451-4:2013 applies to type tests.
ISO 14451-4:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

ISO 14451-8:2013 specifies the types and order of tests to be applied to the igniter and sets out the acceptance criteria and means of categorization.
ISO 14451-8:2013 applies to type tests.
ISO 14451-8:2013 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.

This European Standard specifies requirements for the construction, performance and protective packaging of Category 4 fireworks, as listed in EN 16261-1.
This European Standard does not apply for articles containing pyrotechnic compositions that include any of the following substances:
-   arsenic or arsenic compounds;
-   polychlorobenzenes;
-   lead or lead compounds;
-   mercury compounds;
-   white phosphorus;
-   picrates or picric acid.
This European Standard does not apply for articles containing military explosives or commercial blasting agents except for black powder or flash composition.
In addition, any European regulation regarding forbidden substances should be taken into account.

This European Standard specifies test methods for fireworks of category 4.

This European Standard specifies requirements for the construction, performance and primary packaging of theatrical pyrotechnical articles of the generic types defined in EN 16256-1:2012, Clause 3.
NOTE   Theatrical pyrotechnic article(s) is abbreviated by article(s) in this European Standard.
This European Standard does not apply for articles containing military explosives or commercial blasting agents except for black powder or flash composition.
This European Standard does not apply for articles containing pyrotechnic composition that include any of the following substances:
-   arsenic or arsenic compounds;
-   polychlorobenzenes;
-   lead or lead compounds;
-   mercury compounds;
-   white phosphorus;
picrates or picric acid.

This European Standard specifies minimum labelling requirements for the article and primary packaging and for the instructions for use of theatrical pyrotechnic articles of the generic types defined in EN 16256-1:2012, Clause 3.

This European Standard specifies test methods. It is applicable to theatrical pyrotechnic articles of the generic types defined in FprEN 16256-1:2012, Clause 3.
NOTE   In this document "Theatrical Pyrotechnic Articles" are referred to as "articles".