Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 3: Network Architecture

REN/ITS-0030034

Inteligentni transportni sistemi (ITS) - Komunikacije med vozili - Geomreženje - 3. del: Arhitektura omrežja

Ta dokument določa arhitekturo omrežja komunikacij v inteligentnih transportnih sistemih (ITSC). Arhitektura omrežja se osredotoča na komunikacijo med vozili, toda ni omejena nanjo. Arhitektura omogoča širok razpon aplikacij inteligentnega transportnega sistema za varnost na cesti in učinkovitost v prometu, kot tudi za informacijsko-razvedrilne sisteme in poslovanje.
Ta dokument določa okvir za omrežne protokole in protokole za prenos podatkov, ki omogočajo izmenjavo podatkov med postajami inteligentnega transportnega sistema. Poseben vidik je protokol za geomreženje, ki omogoča ad hoc in večskokovno (večhopno) komunikacijo prek brezžičnih omrežij kratkega dosega, ki uporabljajo geografske položaje.

General Information

Status
Published
Publication Date
10-Dec-2014
Current Stage
12 - Completion
Due Date
22-Dec-2014
Completion Date
11-Dec-2014
Mandate

Buy Standard

Standard
EN 302 636-3 V1.2.1:2015
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 302 636-3 V1.2.1 (2014-12) - Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 3: Network Architecture
English language
23 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 302 636-3 V1.2.0 (2014-10) - Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 3: Network Architecture
English language
23 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Inteligentni transportni sistemi (ITS) - Komunikacije med vozili - Geomreženje - 3. del: Arhitektura omrežjaIntelligent Transport Systems (ITS) - Vehicular Communications - GeoNetworking - Part 3: Network Architecture35.240.60Uporabniške rešitve IT v transportu in trgoviniIT applications in transport and trade35.110OmreževanjeNetworkingICS:Ta slovenski standard je istoveten z:EN 302 636-3 V1.2.1SIST EN 302 636-3 V1.2.1:2015en01-oktober-2015SIST EN 302 636-3 V1.2.1:2015SLOVENSKI
STANDARD



SIST EN 302 636-3 V1.2.1:2015



ETSI EN 302 636-3 V1.2.1 (2014-12) Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 3: Network Architecture
EUROPEAN STANDARD SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 2
Reference REN/ITS-0030034 Keywords Autonomic Networking, ITS, network, safety ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Modal verbs terminology . 4 Introduction . 4 1 Scope . 5 2 References . 5 2.1 Normative references . 5 2.2 Informative references . 6 3 Definitions and abbreviations . 6 3.1 Definitions . 6 3.2 Abbreviations . 7 4 Network architecture for ITS stations . 8 5 Deployment scenarios of the generic network architecture. 10 6 Components of the network architecture . 11 6.1 General . 11 6.2 Sub-components of vehicle ITS stations and roadside ITS stations . 11 6.3 Network connectivity among ITS stations . 12 6.4 Network reference points . 14 7 ITS station protocol architecture . 15 7.1 Protocol stack overview . 15 7.2 Protocols of the ITS networking and transport layer . 16 7.3 Assembly of networking and transport protocols in the ITS station protocol stack . 16 7.3.1 Overview . 16 7.3.2 GeoNetworking protocol stack . 17 7.3.3 IPv6 stack . 17 7.3.4 Combination of the GeoNetworking protocol and IPv6 . 18 7.3.5 Protocol stacks for other network protocols . 18 8 Interfaces and service access points . 18 9 Framework for networking and transport protocols . 20 9.1 GeoNetworking functional requirements . 20 9.1.1 Ad hoc networking. 20 9.1.2 Addressing . 20 9.1.3 Resource management and decentralized data congestion control . 21 9.1.4 Integration of GeoNetworking and IPv6 . 21 9.1.5 Backward compatibility to IPv4 . 21 9.1.6 Usage of multiple ITS access technologies . 21 9.1.7 Security and privacy protection . 21 9.2 Other protocol stacks . 21 Annex A (informative): Bibliography . 22 History . 23
SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (EN) has been produced by ETSI Technical Committee Intelligent Transport Systems (ITS). The present document is part 3 of a multi-part deliverable. Full details of the entire series can be found in part 1 [7].
National transposition dates Date of adoption of this EN: 8 December 2014 Date of latest announcement of this EN (doa): 31 March 2015 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 September 2015 Date of withdrawal of any conflicting National Standard (dow): 30 September 2016
Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document specifies the network architecture for communication-based Intelligent Transport Systems (ITS) using different ITS access technologies, such as ITS-G5. The network architecture provides - in combination with the description of scenarios - a basis for the technical specification of the networking and transport protocols, in particular for GeoNetworking and its related protocols. The present document first introduces a generic, high-level system view of the network architecture and defines four basic deployment scenarios. Based on the system view, it identifies and describes the main network components and specifies network reference points among them. Central component of the architecture is the ITS station. For this component, an overview of its protocol architecture is given and different options of using the GeoNetworking protocol in combination with transport protocols and protocols of the IP suite are described. Finally, the present document defines frameworks for different aspects of networking and data transport, such as ad hoc communication, addressing, resource management and data congestion control, integration with protocols of the IP suite and others. The network architecture is based on the ITS architecture specified in ETSI EN 302 665 [1] and represents the networking viewpoint of the overall architecture. SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 5 1 Scope The present document specifies a network architecture of communications in Intelligent Transportation Systems (ITSC). The network architecture is focused on, but not limited to, vehicular communication. The architecture enables a wide range of ITS applications for road safety, traffic efficiency as well as for infotainment and business. The present document defines the framework for network and data transport protocols that provide data exchange among ITS stations. A particular aspect is the GeoNetworking protocol that provides ad hoc and multi-hop communication over short-range wireless technologies utilizing geographical positions. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] ETSI EN 302 665: "Intelligent Transport Systems (ITS); Communications Architecture". [2] ISO/IEC 7498-1: "Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Model". [3] ETSI TS 102 637-1: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Part 1: Functional Requirements". [4] ETSI TS 102 637-2: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Part 2: Specification of Cooperative Awareness Basic Service". [5] ETSI TS 102 637-3: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Part 3: Specifications of Decentralized Environmental Notification Basic Service". [6] ETSI EN 302 663: "Intelligent Transport Systems (ITS); Access layer specification for Intelligent Transport Systems operating in the 5 GHz frequency band". [7] ETSI EN 302 636-1: "Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 1: Requirements". [8] ETSI EN 302 636-2: "Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 2: Scenarios". [9] ETSI TS 102 636-4-1: "Intelligent Transport System (ITS); Vehicular communications; GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; Sub-part 1: Media-Independent Functionality". [10] ETSI TS 102 636-5-1: "Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 5: Transport Protocols; Sub-part 1: Basic Transport Protocol". [11] ETSI TS 102 636-6-1: "Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 6: Internet Integration; Sub-part 1: Transmission of IPv6 Packets over GeoNetworking Protocols". SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 6 [12] ETSI TS 102 723 (all parts): "Intelligent Transport Systems (ITS); OSI cross-layer topics". [13] ETSI TS 102 731: "Intelligent Transport Systems (ITS); Security; Security Services and Architecture". [14] ETSI TS 102 940: "Intelligent Transport Systems (ITS); Security; ITS communications security architecture and security management". [15] ISO/IEC 8802-2: "Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements; Part 2: Logical Link Control". [16] IETF RFC 791: "Internet Protocol". [17] IETF RFC 2460: "Internet Protocol, Version 6 (IPv6) Specification". [18] IETF RFC 3775: "Mobility Support in IPv6". [19] IETF RFC 768: "User Datagram Protocol". [20] IETF RFC 793: "Transmission Control Protocol". [21] IETF RFC 3963: "Network Mobility (NEMO) Basic Support Protocol". [22] IETF RFC 5213: "Proxy Mobile IPv6". [23] IETF RFC 5648: "Multiple Care-of Addresses Registration". 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Recommendation ITU-R M.687-2: "International Mobile Telecommunications 2000 (IMT-2000)". [i.2] IETF RFC 3753: "Mobility Related Terminology". [i.3] 3GPP: "UMTS Standard, Release 08 Specification". NOTE: Available at: http://www.3gpp.org. [i.4] IETF RFC 4213: "Basic Transition Mechanisms for IPv6 Hosts and Routers". [i.5] IETF RFC 2185: "Routing Aspects of IPv6 Transition". 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ETSI EN 302 665 [1], ISO/IEC 7498-1 [2] and the following apply: access network gateway: router at the edge of a network that connects an ITS station-internal network to the ITS access network, the public access network, and the private access network access router: IPv6 router that acts as point of attachment and provides access to other networks, such as to the ITS access network NOTE: The definition is taken from RFC 3753 [i.2] and adapted to the ITS network architecture. ad hoc network: wireless networks based on self-organization without the need for a coordinating infrastructure SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 7 ad hoc router: router that is associated with the ITS ad hoc network and executes an ad hoc networking protocol Application Unit (AU): physical unit in an ITS station that executes applications and uses the communication services of a communication & control unit (CCU) Communication and Control Unit (CCU): physical communication unit located in an ITS station that implements communication protocols and provides communication services GeoNetworking: network service that utilizes geographical positions and provides ad hoc communication without the need for a coordinating communication infrastructure GeoNetworking protocol: network protocol that provides the GeoNetworking service ITS access network: communication network that interconnects roadside ITS stations among each other in an ITS specific way and optionally interconnects them to the core network (e.g. the Internet) ITS ad hoc network: special type of mobile ad hoc network in the ITS architecture that enables self-organized communication among ITS stations without the need for a coordinating communication infrastructure ITS operational support service: service for operation of the ITS, such as the provision of security credentials to users and vehicle drivers ITS station internal network: network that interconnects the different components of an ITS station legacy roadside infrastructure: road infrastructure, e.g. road sensors, loops, networks, switches, router, processing entities, etc. legacy services: legacy Internet services, such as WWW, email, Internet access, file transfer, etc. mobile network: entire network, moving as a unit, which dynamically changes its point of attachment to the Internet and thus its reachability in the topology mobile router: IPv6 router that acts as gateway between a IPv6 mobile network and another IP-based network, and capable of changing its point of attachment to the network, moving from one link to another link private access network: network that provides data services to a closed user group for a secured access to another system proprietary local network: communication network attached to an ITS station, for example a controller area network (CAN) in a vehicle or a network of roadside legacy infrastructure public access network: network that provides access to general purpose networks that are publicly accessible 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI EN 302 665 [1], ISO/IEC 7498-1 [2] and the following apply: AU Application Unit CAN Controller Area Network CCU Communication and Control Unit DCC Decentralized Congestion Control GPRS General Packet Radio Service IMT International Mobile Telecommunications IP Internet Protocol ITSC ITS Communications NEMO Network Mobility PDCP Packet Data Convergence Protocol TCP Transmission Control Protocol UDP User Datagram Protocol UE User Equipment UMTS Universal Mobile Telecommunication System WIMAXTM Worldwide Interoperability for Microwave Access WWW World Wide Web SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 8 4 Network architecture for ITS stations The network architecture comprises external and internal networks. External networks interconnect ITS stations among each other or connect ITS stations to other network entities. The following external networks are identified: • ITS ad hoc network. • Access network (ITS access network, public access network, private access network). • Core network (e.g. the Internet). Additionally, an ITS station can have an internal network that interconnects the components of the ITS station. The different networks shall provide support for at least one of the use cases of road safety, traffic efficiency, infotainment and business applications. However, it is presumed that the communication within a single network does not meet all the requirements of all applications and use cases. Instead combinations of networks are envisioned, in which multiple ITS access and networking technologies are applied.
Figure 1: External networks involved in the ITS architecture and their interconnections Figure 1 represents the highest level of abstraction of the ITS network architecture, where the external networks, represented by clouds are connected. The networks can be categorized into an ITS domain and a generic domain as specified in ETSI EN 302 665 [1]. The external networks can be described as follows: The ITS ad hoc network enables ad hoc communication among vehicle, roadside and personal ITS stations. The communication is based on wireless technologies that provide a short communication range (referred to as "short-range wireless technology") and allow for mobility of the ITS stations forming arbitrary network topologies without the need for a coordinating communication infrastructure. An example of an ITS ad hoc network is a network of vehicle, roadside and personal ITS stations interconnected by ITS-G5 wireless technology as defined in ETSI EN 302 663 [6]. An ITS access network is a dedicated network that provides access to specific ITS services and applications and can be operated by a road operator or other operators. The ITS access network also interconnects roadside ITS stations and provides communication in between these as well as among vehicle ITS stations via the roadside ITS stations that are interconnected in the ITS access network. This local network can then enable the vehicle ITS stations to communicate via a roadside infrastructure communication network instead directly in ad hoc mode. As an example, an ITS access network can connect roadside ITS stations along a highway with a central ITS station (e.g. a road traffic management centre). In the case that short-range wireless technology is used for communication via roadside ITS stations, the connectivity to the ITS access network is typically provided intermittently.
A public access network provides access to general purpose networks that are publicly accessible. An example is an IMT-2000 network as outlined in Recommendation ITU-R M.687-2 [i.1] that connects vehicle ITS stations to the Internet and provides mobile Internet access.
SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 9 A private access network, in contrast to a public access network, provides data services to a closed user group for a secured access to another network. For example, a private access network can connect vehicle ITS stations to a company's intranet. The access networks and the core network provide access to various services: • legacy services, such as WWW, email and many others; • ITS services provided by road traffic management centres and backend services; • ITS operational support services required to operate the ITS, such as security services.
Core component of the architecture is the ITS station, which has two main roles: in its first role, the ITS station is a network node and acts as a communication source or sink. Likewise an ITS station can be a forwarder of data, e.g. in the ITS ad hoc network. In its second role, the ITS station is placed at the network edge and connect the different networks via an ITS station internal network (see Figure 1). ITS stations shall be able to communicate via at least one of the following means (see Figure 2): a) via an ITS ad hoc network; b) via an ITS access network; c) via a public access network; d) via a private access network; e) via one of the access networks into the core network (e.g. the Internet). In addition to the networks listed above, an ITS station can also be attached to proprietary local networks of e.g. vehicle ITS sub-systems and roadside ITS sub-system as presented in ETSI EN 302 665 [1]. Typical examples are: • Controller Area Network (CAN) in a vehicle ITS sub-system. • Legacy roadside infrastructure in a roadside ITS sub-system. However, these proprietary networks are outside the scope of the present document.
Figure 2: High-level network architecture SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 10 5 Deployment scenarios of the generic network architecture The ITS network architecture can be deployed in different scenarios to adapt to specific economical and regulatory conditions and to facilitate a gradual introduction of ITS. Basically, a deployment scenario is a subset of the overall architecture (see Figure 2) created by a combination of the different network types in support of the communication scenarios specified in ETSI EN 302 636-2 [8]. Four basic deployment scenarios can be defined. The basic deployment scenarios can further be extended to hybrid scenarios that combine two or more deployment scenarios. These combinations also include scenarios in which a network is connected to more than a single network simultaneously. Scenario A establishes an ITS ad hoc network, which can be connected via an ITS access network to the core network (e.g. the Internet) (see Figure 3). Deployment scenario B represents an ITS access network, which can be connected to the core network (e.g. the Internet) (see Figure 4). Deployment scenario C is based on a public access network, which can also provide connectivity to the core network (e.g. the Internet) (see Figure 5). Deployment scenario D uses a private access network to connect to other networks or the core network (e.g. the Internet) (see Figure 6).
Figure 3: Deployment scenario A: Ad hoc-centric In Figure 4, the ITS access network connects roadside ITS stations to each other and provides connectivity to a core network (e.g. the Internet). Optionally, the ITS access network can also be replaced by a public or private access network.
Figure 4: Deployment scenario B: ITS access network-centric
Figure 5: Deployment scenario C: Public access network-centric
Figure 6: Deployment scenario D: Private access network-centric SIST EN 302 636-3 V1.2.1:2015



ETSI ETSI EN 302 636-3 V1.2.1 (2014-12) 11 6 Components of the network architecture 6.1 General Main component of the network architecture is the ITS station as specified in ETSI EN 302 665 [1]. The following types of ITS stations are identified: • vehicle ITS station; • personal ITS station; • roadside ITS station; • central ITS station. In addition to these instantiations, the ITS-S Border Router as specified in ETSI EN 302 665 [1] interconnects networks in the ITS domain with networks in the generic domain. Additionally to the ITS station component, the present document introduces specific network components related to IPv6 communication as outlined in RFC 3753 [i.2], i.e.: • ad hoc router; • mobile router; • access router; and • access network gateway; that will be defined below. 6.2 Sub-components of vehicle ITS stations and roadside ITS stations Vehicle ITS stations and roadside ITS stations consist of two types of sub-components, the Communication & Control Unit (CCU) and the Application Unit (AU) (Figure 7). In general, a CCU executes a communication protocol stack. An AU runs a single or a set of applications and utilizes the CCU's communication capabilities. In a possible implementation, the CCU executes the ITS access technology, ITS network & transport, and the ITS facilities layers, whereas the ITS application layer resides in the AU. The distinction between AU and CCU is logical; all layers can also be implemented in a single physical unit. NOTE: The components of a personal ITS station and central ITS station will be refined at a later stage of the network architecture definition. The CCU shall be equipped with at least a single ITS external communication interface to provide connectivity to the ITS ad hoc network or the different access networks (ITS access network, public access network, private access network). The CCU and the AU can be equipped with one or multiple ITS internal communication interfaces. Moreover, an AU can have an external communication interface ("Gateway Interface" in Figure 7) for access to the proprietary local ne
...

ETSI EN 302 636-3 V1.2.1 (2014-12)






EUROPEAN STANDARD
Intelligent Transport Systems (ITS);
Vehicular Communications;
GeoNetworking;
Part 3: Network Architecture

---------------------- Page: 1 ----------------------
2 ETSI EN 302 636-3 V1.2.1 (2014-12)



Reference
REN/ITS-0030034
Keywords
Autonomic Networking, ITS, network, safety
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 302 636-3 V1.2.1 (2014-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Network architecture for ITS stations . 8
5 Deployment scenarios of the generic network architecture. 10
6 Components of the network architecture . 11
6.1 General . 11
6.2 Sub-components of vehicle ITS stations and roadside ITS stations . 11
6.3 Network connectivity among ITS stations . 12
6.4 Network reference points . 14
7 ITS station protocol architecture . 15
7.1 Protocol stack overview . 15
7.2 Protocols of the ITS networking and transport layer . 16
7.3 Assembly of networking and transport protocols in the ITS station protocol stack . 16
7.3.1 Overview . 16
7.3.2 GeoNetworking protocol stack . 17
7.3.3 IPv6 stack . 17
7.3.4 Combination of the GeoNetworking protocol and IPv6 . 18
7.3.5 Protocol stacks for other network protocols . 18
8 Interfaces and service access points . 18
9 Framework for networking and transport protocols . 20
9.1 GeoNetworking functional requirements . 20
9.1.1 Ad hoc networking. 20
9.1.2 Addressing . 20
9.1.3 Resource management and decentralized data congestion control . 21
9.1.4 Integration of GeoNetworking and IPv6 . 21
9.1.5 Backward compatibility to IPv4 . 21
9.1.6 Usage of multiple ITS access technologies . 21
9.1.7 Security and privacy protection . 21
9.2 Other protocol stacks . 21
Annex A (informative): Bibliography . 22
History . 23

ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 302 636-3 V1.2.1 (2014-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Intelligent Transport Systems (ITS).
The present document is part 3 of a multi-part deliverable. Full details of the entire series can be found in part 1 [7].

National transposition dates
Date of adoption of this EN: 8 December 2014
Date of latest announcement of this EN (doa): 31 March 2015
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 September 2015
Date of withdrawal of any conflicting National Standard (dow): 30 September 2016

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document specifies the network architecture for communication-based Intelligent Transport Systems (ITS)
using different ITS access technologies, such as ITS-G5. The network architecture provides - in combination with the
description of scenarios - a basis for the technical specification of the networking and transport protocols, in particular
for GeoNetworking and its related protocols.
The present document first introduces a generic, high-level system view of the network architecture and defines four
basic deployment scenarios. Based on the system view, it identifies and describes the main network components and
specifies network reference points among them. Central component of the architecture is the ITS station. For this
component, an overview of its protocol architecture is given and different options of using the GeoNetworking protocol
in combination with transport protocols and protocols of the IP suite are described. Finally, the present document
defines frameworks for different aspects of networking and data transport, such as ad hoc communication, addressing,
resource management and data congestion control, integration with protocols of the IP suite and others.
The network architecture is based on the ITS architecture specified in ETSI EN 302 665 [1] and represents the
networking viewpoint of the overall architecture.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 302 636-3 V1.2.1 (2014-12)
1 Scope
The present document specifies a network architecture of communications in Intelligent Transportation Systems
(ITSC). The network architecture is focused on, but not limited to, vehicular communication. The architecture enables a
wide range of ITS applications for road safety, traffic efficiency as well as for infotainment and business.
The present document defines the framework for network and data transport protocols that provide data exchange
among ITS stations. A particular aspect is the GeoNetworking protocol that provides ad hoc and multi-hop
communication over short-range wireless technologies utilizing geographical positions.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 302 665: "Intelligent Transport Systems (ITS); Communications Architecture".
[2] ISO/IEC 7498-1: "Information technology - Open Systems Interconnection - Basic Reference
Model: The Basic Model".
[3] ETSI TS 102 637-1: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set
of Applications; Part 1: Functional Requirements".
[4] ETSI TS 102 637-2: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set
of Applications; Part 2: Specification of Cooperative Awareness Basic Service".
[5] ETSI TS 102 637-3: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set
of Applications; Part 3: Specifications of Decentralized Environmental Notification Basic
Service".
[6] ETSI EN 302 663: "Intelligent Transport Systems (ITS); Access layer specification for Intelligent
Transport Systems operating in the 5 GHz frequency band".
[7] ETSI EN 302 636-1: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 1: Requirements".
[8] ETSI EN 302 636-2: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 2: Scenarios".
[9] ETSI TS 102 636-4-1: "Intelligent Transport System (ITS); Vehicular communications;
GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-
multipoint communications; Sub-part 1: Media-Independent Functionality".
[10] ETSI TS 102 636-5-1: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 5: Transport Protocols; Sub-part 1: Basic Transport Protocol".
[11] ETSI TS 102 636-6-1: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 6: Internet Integration; Sub-part 1: Transmission of IPv6 Packets over
GeoNetworking Protocols".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI EN 302 636-3 V1.2.1 (2014-12)
[12] ETSI TS 102 723 (all parts): "Intelligent Transport Systems (ITS); OSI cross-layer topics".
[13] ETSI TS 102 731: "Intelligent Transport Systems (ITS); Security; Security Services and
Architecture".
[14] ETSI TS 102 940: "Intelligent Transport Systems (ITS); Security; ITS communications security
architecture and security management".
[15] ISO/IEC 8802-2: "Information technology - Telecommunications and information exchange
between systems - Local and metropolitan area networks - Specific requirements; Part 2: Logical
Link Control".
[16] IETF RFC 791: "Internet Protocol".
[17] IETF RFC 2460: "Internet Protocol, Version 6 (IPv6) Specification".
[18] IETF RFC 3775: "Mobility Support in IPv6".
[19] IETF RFC 768: "User Datagram Protocol".
[20] IETF RFC 793: "Transmission Control Protocol".
[21] IETF RFC 3963: "Network Mobility (NEMO) Basic Support Protocol".
[22] IETF RFC 5213: "Proxy Mobile IPv6".
[23] IETF RFC 5648: "Multiple Care-of Addresses Registration".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-R M.687-2: "International Mobile Telecommunications 2000 (IMT-2000)".
[i.2] IETF RFC 3753: "Mobility Related Terminology".
[i.3] 3GPP: "UMTS Standard, Release 08 Specification".
NOTE: Available at: http://www.3gpp.org.
[i.4] IETF RFC 4213: "Basic Transition Mechanisms for IPv6 Hosts and Routers".
[i.5] IETF RFC 2185: "Routing Aspects of IPv6 Transition".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI EN 302 665 [1], ISO/IEC 7498-1 [2]
and the following apply:
access network gateway: router at the edge of a network that connects an ITS station-internal network to the ITS
access network, the public access network, and the private access network
access router: IPv6 router that acts as point of attachment and provides access to other networks, such as to the ITS
access network
NOTE: The definition is taken from RFC 3753 [i.2] and adapted to the ITS network architecture.
ad hoc network: wireless networks based on self-organization without the need for a coordinating infrastructure
ETSI

---------------------- Page: 6 ----------------------
7 ETSI EN 302 636-3 V1.2.1 (2014-12)
ad hoc router: router that is associated with the ITS ad hoc network and executes an ad hoc networking protocol
Application Unit (AU): physical unit in an ITS station that executes applications and uses the communication services
of a communication & control unit (CCU)
Communication and Control Unit (CCU): physical communication unit located in an ITS station that implements
communication protocols and provides communication services
GeoNetworking: network service that utilizes geographical positions and provides ad hoc communication without the
need for a coordinating communication infrastructure
GeoNetworking protocol: network protocol that provides the GeoNetworking service
ITS access network: communication network that interconnects roadside ITS stations among each other in an ITS
specific way and optionally interconnects them to the core network (e.g. the Internet)
ITS ad hoc network: special type of mobile ad hoc network in the ITS architecture that enables self-organized
communication among ITS stations without the need for a coordinating communication infrastructure
ITS operational support service: service for operation of the ITS, such as the provision of security credentials to users
and vehicle drivers
ITS station internal network: network that interconnects the different components of an ITS station
legacy roadside infrastructure: road infrastructure, e.g. road sensors, loops, networks, switches, router, processing
entities, etc.
legacy services: legacy Internet services, such as WWW, email, Internet access, file transfer, etc.
mobile network: entire network, moving as a unit, which dynamically changes its point of attachment to the Internet
and thus its reachability in the topology
mobile router: IPv6 router that acts as gateway between a IPv6 mobile network and another IP-based network, and
capable of changing its point of attachment to the network, moving from one link to another link
private access network: network that provides data services to a closed user group for a secured access to another
system
proprietary local network: communication network attached to an ITS station, for example a controller area
network (CAN) in a vehicle or a network of roadside legacy infrastructure
public access network: network that provides access to general purpose networks that are publicly accessible
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI EN 302 665 [1], ISO/IEC 7498-1 [2] and the
following apply:
AU Application Unit
CAN Controller Area Network
CCU Communication and Control Unit
DCC Decentralized Congestion Control
GPRS General Packet Radio Service
IMT International Mobile Telecommunications
IP Internet Protocol
ITSC ITS Communications
NEMO Network Mobility
PDCP Packet Data Convergence Protocol
TCP Transmission Control Protocol
UDP User Datagram Protocol
UE User Equipment
UMTS Universal Mobile Telecommunication System
TM
WIMAX Worldwide Interoperability for Microwave Access
WWW World Wide Web
ETSI

---------------------- Page: 7 ----------------------
8 ETSI EN 302 636-3 V1.2.1 (2014-12)
4 Network architecture for ITS stations
The network architecture comprises external and internal networks. External networks interconnect ITS stations among
each other or connect ITS stations to other network entities. The following external networks are identified:
• ITS ad hoc network.
• Access network (ITS access network, public access network, private access network).
• Core network (e.g. the Internet).
Additionally, an ITS station can have an internal network that interconnects the components of the ITS station.
The different networks shall provide support for at least one of the use cases of road safety, traffic efficiency,
infotainment and business applications. However, it is presumed that the communication within a single network does
not meet all the requirements of all applications and use cases. Instead combinations of networks are envisioned, in
which multiple ITS access and networking technologies are applied.

Figure 1: External networks involved in the ITS architecture and their interconnections
Figure 1 represents the highest level of abstraction of the ITS network architecture, where the external networks,
represented by clouds are connected. The networks can be categorized into an ITS domain and a generic domain as
specified in ETSI EN 302 665 [1]. The external networks can be described as follows:
The ITS ad hoc network enables ad hoc communication among vehicle, roadside and personal ITS stations. The
communication is based on wireless technologies that provide a short communication range (referred to as "short-range
wireless technology") and allow for mobility of the ITS stations forming arbitrary network topologies without the need
for a coordinating communication infrastructure. An example of an ITS ad hoc network is a network of vehicle,
roadside and personal ITS stations interconnected by ITS-G5 wireless technology as defined in ETSI EN 302 663 [6].
An ITS access network is a dedicated network that provides access to specific ITS services and applications and can be
operated by a road operator or other operators. The ITS access network also interconnects roadside ITS stations and
provides communication in between these as well as among vehicle ITS stations via the roadside ITS stations that are
interconnected in the ITS access network. This local network can then enable the vehicle ITS stations to communicate
via a roadside infrastructure communication network instead directly in ad hoc mode. As an example, an ITS access
network can connect roadside ITS stations along a highway with a central ITS station (e.g. a road traffic management
centre). In the case that short-range wireless technology is used for communication via roadside ITS stations, the
connectivity to the ITS access network is typically provided intermittently.
A public access network provides access to general purpose networks that are publicly accessible. An example is an
IMT-2000 network as outlined in Recommendation ITU-R M.687-2 [i.1] that connects vehicle ITS stations to the
Internet and provides mobile Internet access.
ETSI

---------------------- Page: 8 ----------------------
9 ETSI EN 302 636-3 V1.2.1 (2014-12)
A private access network, in contrast to a public access network, provides data services to a closed user group for a
secured access to another network. For example, a private access network can connect vehicle ITS stations to a
company's intranet.
The access networks and the core network provide access to various services:
• legacy services, such as WWW, email and many others;
• ITS services provided by road traffic management centres and backend services;
• ITS operational support services required to operate the ITS, such as security services.
Core component of the architecture is the ITS station, which has two main roles: in its first role, the ITS station is a
network node and acts as a communication source or sink. Likewise an ITS station can be a forwarder of data, e.g. in
the ITS ad hoc network. In its second role, the ITS station is placed at the network edge and connect the different
networks via an ITS station internal network (see Figure 1).
ITS stations shall be able to communicate via at least one of the following means (see Figure 2):
a) via an ITS ad hoc network;
b) via an ITS access network;
c) via a public access network;
d) via a private access network;
e) via one of the access networks into the core network (e.g. the Internet).
In addition to the networks listed above, an ITS station can also be attached to proprietary local networks of e.g. vehicle
ITS sub-systems and roadside ITS sub-system as presented in ETSI EN 302 665 [1]. Typical examples are:
• Controller Area Network (CAN) in a vehicle ITS sub-system.
• Legacy roadside infrastructure in a roadside ITS sub-system.
However, these proprietary networks are outside the scope of the present document.

Figure 2: High-level network architecture
ETSI

---------------------- Page: 9 ----------------------
10 ETSI EN 302 636-3 V1.2.1 (2014-12)
5 Deployment scenarios of the generic network
architecture
The ITS network architecture can be deployed in different scenarios to adapt to specific economical and regulatory
conditions and to facilitate a gradual introduction of ITS. Basically, a deployment scenario is a subset of the overall
architecture (see Figure 2) created by a combination of the different network types in support of the communication
scenarios specified in ETSI EN 302 636-2 [8].
Four basic deployment scenarios can be defined. The basic deployment scenarios can further be extended to hybrid
scenarios that combine two or more deployment scenarios. These combinations also include scenarios in which a
network is connected to more than a single network simultaneously.
Scenario A establishes an ITS ad hoc network, which can be connected via an ITS access network to the core network
(e.g. the Internet) (see Figure 3). Deployment scenario B represents an ITS access network, which can be connected to
the core network (e.g. the Internet) (see Figure 4). Deployment scenario C is based on a public access network, which
can also provide connectivity to the core network (e.g. the Internet) (see Figure 5). Deployment scenario D uses a
private access network to connect to other networks or the core network (e.g. the Internet) (see Figure 6).

Figure 3: Deployment scenario A: Ad hoc-centric
In Figure 4, the ITS access network connects roadside ITS stations to each other and provides connectivity to a core
network (e.g. the Internet). Optionally, the ITS access network can also be replaced by a public or private access
network.

Figure 4: Deployment scenario B: ITS access network-centric

Figure 5: Deployment scenario C: Public access network-centric

Figure 6: Deployment scenario D: Private access network-centric
ETSI

---------------------- Page: 10 ----------------------
11 ETSI EN 302 636-3 V1.2.1 (2014-12)
6 Components of the network architecture
6.1 General
Main component of the network architecture is the ITS station as specified in ETSI EN 302 665 [1]. The following
types of ITS stations are identified:
• vehicle ITS station;
• personal ITS station;
• roadside ITS station;
• central ITS station.
In addition to these instantiations, the ITS-S Border Router as specified in ETSI EN 302 665 [1] interconnects networks
in the ITS domain with networks in the generic domain. Additionally to the ITS station component, the present
document introduces specific network components related to IPv6 communication as outlined in RFC 3753 [i.2], i.e.:
• ad hoc router;
• mobile router;
• access router; and
• access network gateway;
that will be defined below.
6.2 Sub-components of vehicle ITS stations and roadside ITS
stations
Vehicle ITS stations and roadside ITS stations consist of two types of sub-components, the Communication & Control
Unit (CCU) and the Application Unit (AU) (Figure 7). In general, a CCU executes a communication protocol stack. An
AU runs a single or a set of applications and utilizes the CCU's communication capabilities.
In a possible implementation, the CCU executes the ITS access technology, ITS network & transport, and the ITS
facilities layers, whereas the ITS application layer resides in the AU. The distinction between AU and CCU is logical;
all layers can also be implemented in a single physical unit.
NOTE: The components of a personal ITS station and central ITS station will be refined at a later stage of the
network architecture definition.
The CCU shall be equipped with at least a single ITS external communication interface to provide connectivity to the
ITS ad hoc network or the different access networks (ITS access network, public access network, private access
network). The CCU and the AU can be equipped with one or multiple ITS internal communication interfaces.
Moreover, an AU can have an external communication interface ("Gateway Interface" in Figure 7) for access
...

Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)






EUROPEAN STANDARD
Intelligent Transport Systems (ITS);
Vehicular Communications;
GeoNetworking;
Part 3: Network Architecture

---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)



Reference
REN/ITS-0030034
Keywords
Autonomic Networking, ITS, network, safety
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Network architecture for ITS stations . 8
5 Deployment scenarios of the generic network architecture. 10
6 Components of the network architecture . 11
6.1 General . 11
6.2 Sub-components of vehicle ITS stations and roadside ITS stations . 11
6.3 Network connectivity among ITS stations . 12
6.4 Network reference points . 14
7 ITS station protocol architecture . 15
7.1 Protocol stack overview . 15
7.2 Protocols of the ITS networking and transport layer . 16
7.3 Assembly of networking and transport protocols in the ITS station protocol stack . 16
7.3.1 Overview . 16
7.3.2 GeoNetworking protocol stack . 17
7.3.3 IPv6 stack . 17
7.3.4 Combination of the GeoNetworking protocol and IPv6 . 18
7.3.5 Protocol stacks for other network protocols . 18
8 Interfaces and service access points . 18
9 Framework for networking and transport protocols . 20
9.1 GeoNetworking functional requirements . 20
9.1.1 Ad hoc networking. 20
9.1.2 Addressing . 20
9.1.3 Resource management and decentralized data congestion control . 21
9.1.4 Integration of GeoNetworking and IPv6 . 21
9.1.5 Backward compatibility to IPv4 . 21
9.1.6 Usage of multiple ITS access technologies . 21
9.1.7 Security and privacy protection . 21
9.2 Other protocol stacks . 21
Annex A (informative): Bibliography . 22
History . 23

ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft European Standard (EN) has been produced by ETSI Technical Committee Intelligent Transport
Systems (ITS), and is now submitted for the Vote phase of the ETSI standards EN Approval Procedure.
The present document is part 3 of a multi-part deliverable. Full details of the entire series can be found in part 1 [7].

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "may not", "need", "need not", "will",
"will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms
for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document specifies the network architecture for communication-based Intelligent Transport Systems (ITS)
using different ITS access technologies, such as ITS-G5. The network architecture provides - in combination with the
description of scenarios - a basis for the technical specification of the networking and transport protocols, in particular
for GeoNetworking and its related protocols.
The present document first introduces a generic, high-level system view of the network architecture and defines four
basic deployment scenarios. Based on the system view, it identifies and describes the main network components and
specifies network reference points among them. Central component of the architecture is the ITS station. For this
component, an overview of its protocol architecture is given and different options of using the GeoNetworking protocol
in combination with transport protocols and protocols of the IP suite are described. Finally, the present document
defines frameworks for different aspects of networking and data transport, such as ad hoc communication, addressing,
resource management and data congestion control, integration with protocols of the IP suite and others.
The network architecture is based on the ITS architecture specified in ETSI EN 302 665 [1] and represents the
networking viewpoint of the overall architecture.
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
1 Scope
The present document specifies a network architecture of communications in Intelligent Transportation
Systems (ITSC). The network architecture is focused on, but not limited to, vehicular communication. The architecture
enables a wide range of ITS applications for road safety, traffic efficiency as well as for infotainment and business.
The present document defines the framework for network and data transport protocols that provide data exchange
among ITS stations. A particular aspect is the GeoNetworking protocol that provides ad hoc and multi-hop
communication over short-range wireless technologies utilizing geographical positions.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 302 665: "Intelligent Transport Systems (ITS); Communications Architecture".
[2] ISO/IEC 7498-1: "Information technology - Open Systems Interconnection - Basic Reference
Model: The Basic Model".
[3] ETSI TS 102 637-1: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set
of Applications; Part 1: Functional Requirements".
[4] ETSI TS 102 637-2: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set
of Applications; Part 2: Specification of Cooperative Awareness Basic Service".
[5] ETSI TS 102 637-3: "Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set
of Applications; Part 3: Specifications of Decentralized Environmental Notification Basic
Service".
[6] ETSI EN 302 663: "Intelligent Transport Systems (ITS); Access layer specification for Intelligent
Transport Systems operating in the 5 GHz frequency band".
[7] ETSI EN 302 636-1: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 1: Requirements".
[8] ETSI EN 302 636-2: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 2: Scenarios".
[9] ETSI TS 102 636-4-1: "Intelligent Transport System (ITS); Vehicular communications;
GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-
multipoint communications; Sub-part 1: Media-Independent Functionality".
[10] ETSI TS 102 636-5-1: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 5: Transport Protocols; Sub-part 1: Basic Transport Protocol".
[11] ETSI TS 102 636-6-1: "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 6: Internet Integration; Sub-part 1: Transmission of IPv6 Packets over
GeoNetworking Protocols".
ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
[12] ETSI TS 102 723 (all parts): "Intelligent Transport Systems (ITS); OSI cross-layer topics".
[13] ETSI TS 102 731: "Intelligent Transport Systems (ITS); Security; Security Services and
Architecture".
[14] ETSI TS 102 940: "Intelligent Transport Systems (ITS); Security; ITS communications security
architecture and security management".
[15] ISO/IEC 8802-2: "Information technology - Telecommunications and information exchange
between systems - Local and metropolitan area networks - Specific requirements; Part 2: Logical
Link Control".
[16] IETF RFC 791: "Internet Protocol".
[17] IETF RFC 2460: "Internet Protocol, Version 6 (IPv6) Specification".
[18] IETF RFC 3775: "Mobility Support in IPv6".
[19] IETF RFC 768: "User Datagram Protocol".
[20] IETF RFC 793: "Transmission Control Protocol".
[21] IETF RFC 3963: "Network Mobility (NEMO) Basic Support Protocol".
[22] IETF RFC 5213: "Proxy Mobile IPv6".
[23] IETF RFC 5648: "Multiple Care-of Addresses Registration".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-R M.687-2: "International Mobile Telecommunications 2000 (IMT-2000)".
[i.2] IETF RFC 3753: "Mobility Related Terminology".
[i.3] 3GPP: "UMTS Standard, Release 08 Specification".
NOTE: Available at: http://www.3gpp.org.
[i.4] IETF RFC 4213: "Basic Transition Mechanisms for IPv6 Hosts and Routers".
[i.5] IETF RFC 2185: "Routing Aspects of IPv6 Transition".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI EN 302 665 [1], ISO/IEC 7498-1 [2]
and the following apply:
access network gateway: router at the edge of a network that connects an ITS station-internal network to the ITS
access network, the public access network, and the private access network
access router: IPv6 router that acts as point of attachment and provides access to other networks, such as to the ITS
access network
NOTE: The definition is taken from RFC 3753 [i.2] and adapted to the ITS network architecture.
ad hoc network: wireless networks based on self-organization without the need for a coordinating infrastructure
ETSI

---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
ad hoc router: router that is associated with the ITS ad hoc network and executes an ad hoc networking protocol
Application Unit (AU): physical unit in an ITS station that executes applications and uses the communication services
of a communication & control unit (CCU)
Communication and Control Unit (CCU): physical communication unit located in an ITS station that implements
communication protocols and provides communication services
GeoNetworking: network service that utilizes geographical positions and provides ad hoc communication without the
need for a coordinating communication infrastructure
GeoNetworking protocol: network protocol that provides the GeoNetworking service
ITS access network: communication network that interconnects roadside ITS stations among each other in an ITS
specific way and optionally interconnects them to the core network (e.g. the Internet)
ITS ad hoc network: special type of mobile ad hoc network in the ITS architecture that enables self-organized
communication among ITS stations without the need for a coordinating communication infrastructure
ITS operational support service: service for operation of the ITS, such as the provision of security credentials to users
and vehicle drivers
ITS station internal network: network that interconnects the different components of an ITS station
legacy roadside infrastructure: road infrastructure, e.g. road sensors, loops, networks, switches, router, processing
entities, etc.
legacy services: legacy Internet services, such as WWW, email, Internet access, file transfer, etc.
mobile network: entire network, moving as a unit, which dynamically changes its point of attachment to the Internet
and thus its reachability in the topology
mobile router: IPv6 router that acts as gateway between a IPv6 mobile network and another IP-based network, and
capable of changing its point of attachment to the network, moving from one link to another link
private access network: network that provides data services to a closed user group for a secured access to another
system
proprietary local network: communication network attached to an ITS station, for example a controller area
network (CAN) in a vehicle or a network of roadside legacy infrastructure
public access network: network that provides access to general purpose networks that are publicly accessible
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI EN 302 665 [1], ISO/IEC 7498-1 [2] and the
following apply:
AU Application Unit
CAN Controller Area Network
CCU Communication and Control Unit
DCC Decentralized Congestion Control
GPRS General Packet Radio Service
IMT International Mobile Telecommunications
IP Internet Protocol
ITSC ITS Communications
NEMO Network Mobility
PDCP Packet Data Convergence Protocol
TCP Transmission Control Protocol
UDP User Datagram Protocol
UE User Equipment
UMTS Universal Mobile Telecommunication System
TM
WIMAX Worldwide Interoperability for Microwave Access
WWW World Wide Web
ETSI

---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
4 Network architecture for ITS stations
The network architecture comprises external and internal networks. External networks interconnect ITS stations among
each other or connect ITS stations to other network entities. The following external networks are identified:
• ITS ad hoc network.
• Access network (ITS access network, public access network, private access network).
• Core network (e.g. the Internet).
Additionally, an ITS station can have an internal network that interconnects the components of the ITS station.
The different networks shall provide support for at least one of the use cases of road safety, traffic efficiency,
infotainment and business applications. However, it is presumed that the communication within a single network does
not meet all the requirements of all applications and use cases. Instead combinations of networks are envisioned, in
which multiple ITS access and networking technologies are applied.

Figure 1: External networks involved in the ITS architecture and their interconnections
Figure 1 represents the highest level of abstraction of the ITS network architecture, where the external networks,
represented by clouds are connected. The networks can be categorized into an ITS domain and a generic domain as
specified in ETSI EN 302 665 [1]. The external networks can be described as follows:
The ITS ad hoc network enables ad hoc communication among vehicle, roadside and personal ITS stations. The
communication is based on wireless technologies that provide a short communication range (referred to as "short-range
wireless technology") and allow for mobility of the ITS stations forming arbitrary network topologies without the need
for a coordinating communication infrastructure. An example of an ITS ad hoc network is a network of vehicle,
roadside and personal ITS stations interconnected by ITS-G5 wireless technology as defined in ETSI EN 302 663 [6].
An ITS access network is a dedicated network that provides access to specific ITS services and applications and can be
operated by a road operator or other operators. The ITS access network also interconnects roadside ITS stations and
provides communication in between these as well as among vehicle ITS stations via the roadside ITS stations that are
interconnected in the ITS access network. This local network can then enable the vehicle ITS stations to communicate
via a roadside infrastructure communication network instead directly in ad hoc mode. As an example, an ITS access
network can connect roadside ITS stations along a highway with a central ITS station (e.g. a road traffic management
centre). In the case that short-range wireless technology is used for communication via roadside ITS stations, the
connectivity to the ITS access network is typically provided intermittently.
A public access network provides access to general purpose networks that are publicly accessible. An example is an
IMT-2000 network as outlined in Recommendation ITU-R M.687-2 [i.1] that connects vehicle ITS stations to the
Internet and provides mobile Internet access.
ETSI

---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
A private access network, in contrast to a public access network, provides data services to a closed user group for a
secured access to another network. For example, a private access network can connect vehicle ITS stations to a
company's intranet.
The access networks and the core network provide access to various services:
• legacy services, such as WWW, email and many others;
• ITS services provided by road traffic management centres and backend services;
• ITS operational support services required to operate the ITS, such as security services.
Core component of the architecture is the ITS station, which has two main roles: in its first role, the ITS station is a
network node and acts as a communication source or sink. Likewise an ITS station can be a forwarder of data, e.g. in
the ITS ad hoc network. In its second role, the ITS station is placed at the network edge and connect the different
networks via an ITS station internal network (see Figure 1).
ITS stations shall be able to communicate via at least one of the following means (see Figure 2):
a) via an ITS ad hoc network;
b) via an ITS access network;
c) via a public access network;
d) via a private access network;
e) via one of the access networks into the core network (e.g. the Internet).
In addition to the networks listed above, an ITS station can also be attached to proprietary local networks of e.g. vehicle
ITS sub-systems and roadside ITS sub-system as presented in ETSI EN 302 665 [1]. Typical examples are:
• Controller Area Network (CAN) in a vehicle ITS sub-system.
• Legacy roadside infrastructure in a roadside ITS sub-system.
However, these proprietary networks are outside the scope of the present document.

Figure 2: High-level network architecture
ETSI

---------------------- Page: 9 ----------------------
10 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
5 Deployment scenarios of the generic network
architecture
The ITS network architecture can be deployed in different scenarios to adapt to specific economical and regulatory
conditions and to facilitate a gradual introduction of ITS. Basically, a deployment scenario is a subset of the overall
architecture (see Figure 2) created by a combination of the different network types in support of the communication
scenarios specified in ETSI EN 302 636-2 [8].
Four basic deployment scenarios can be defined. The basic deployment scenarios can further be extended to hybrid
scenarios that combine two or more deployment scenarios. These combinations also include scenarios in which a
network is connected to more than a single network simultaneously.
Scenario A establishes an ITS ad hoc network, which can be connected via an ITS access network to the core network
(e.g. the Internet) (see Figure 3). Deployment scenario B represents an ITS access network, which can be connected to
the core network (e.g. the Internet) (see Figure 4). Deployment scenario C is based on a public access network, which
can also provide connectivity to the core network (e.g. the Internet) (see Figure 5). Deployment scenario D uses a
private access network to connect to other networks or the core network (e.g. the Internet) (see Figure 6).

Figure 3: Deployment scenario A: Ad hoc-centric
In Figure 4, the ITS access network connects roadside ITS stations to each other and provides connectivity to a core
network (e.g. the Internet). Optionally, the ITS access network can also be replaced by a public or private access
network.

Figure 4: Deployment scenario B: ITS access network-centric

Figure 5: Deployment scenario C: Public access network-centric

Figure 6: Deployment scenario D: Private access network-centric
ETSI

---------------------- Page: 10 ----------------------
11 Final draft ETSI EN 302 636-3 V1.2.0 (2014-10)
6 Components of the network architecture
6.1 General
Main component of the network architecture is the ITS station as specified in ETSI EN 302 665 [1]. The following
types of ITS stations are identified:
• vehicle ITS station;
• personal ITS station;
• roadside ITS station;
• central ITS station.
In addition to these instantiations, the ITS-S Border Router as specified in ETSI EN 302 665 [1] interconnects networks
in the ITS domain with networks in the generic domain. Additionally to the ITS station component, the present
document introduces specific network components related to IPv6 communication as outlined in RFC 3753 [i.2], i.e.:
• ad hoc router;
• mobile router;
• access router; and
• access network gateway;
that will be defined below.
6.2 Sub-components of vehicle ITS stations and roadside ITS
stations
Vehicle ITS stations and roadside ITS stations consist of two types of sub-components, the Communication & Control
Unit (CCU) and the Application Unit (AU) (Figure 7). In general, a CCU executes a communication protocol stack. An
AU runs a single or a set of applications and utilizes the CCU's communication capabilities.
In a possible implementation, the CCU executes the ITS access technology, ITS network & transport, and the ITS
facilities layers, whereas the ITS application layer resides in the AU. The distinction between AU and CCU is logical;
all layers can also be implemented in a single physical unit.
NOTE: The components of a personal ITS station and central ITS station will be refined at a later stage of the
network architecture definition.
The CCU shall be equipped with at least a single ITS external communication interface to provide connectivity to the
ITS ad hoc network or the different access networks (ITS access network, public access network, private acces
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.