Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits

SCOPE
1.1 This specification covers requirements and test methods for materials, dimensions, workmanship, stiffness factor, extrusion quality, and a form of marking for extruded poly(vinyl chloride) (PVC) profile strips used for machinemade field fabrication of spirally wound pipe liners in the rehabilitation of a variety of gravity applications such as sanitary sewers, storm sewers, and process piping in diameters of 6 to 48 in.
1.2 Profile strip produced to this specification is for use in field fabrication of spirally wound liner pipes in nonpressure sewer and conduit rehabilitation, where the spirally wound liner pipe is expanded until it presses against the interior surface of the existing sewer or conduit, or, alternatively, where the spirally wound liner pipe is inserted as a fixed diameter into the existing sewer or conduit and the annular space between the liner pipe and the existing sewer or conduit is grouted.
1.3 This specification includes extruded profile strips made only from materials specified in 5.1.
1.4 The values in parentheses are provided for information only.
1.5 The following precautionary caveat pertains only to the test method portion, Section 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
09-May-2001
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM F1697-01 - Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduits
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: F 1697 – 01 An American National Standard
Standard Specification for
Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-
Wound Liner Pipe Rehabilitation of Existing Sewers and
1 2
Conduit ,
This standard is issued under the fixed designation F 1697; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
3
1. Scope Insulating Materials for Testing
D 790 Test Methods for Flexural Properties of Unreinforced
1.1 This specification covers requirements and test methods
and Reinforced Plastics and Electrical Insulating Materi-
for materials, dimensions, workmanship, stiffness factor, ex-
3
als
trusion quality, and a form of marking for extruded poly(vinyl
3
D 883 Terminology Relating to Plastics
chloride) (PVC) profile strips used for machinemade field
D 1600 Terminology for Abbreviated Terms Relating to
fabrication of spirally wound pipe liners in the rehabilitation of
3
Plastics
a variety of gravity applications such as sanitary sewers, storm
D 1784 Specification for Rigid Poly(Vinyl Chloride) (PVC)
sewers, and process piping in diameters of 6 to 48 in.
Compounds and Chlorinated Poly(Vinyl Chloride)
1.2 Profile strip produced to this specification is for use in
3
(CPVC) Compounds
field fabrication of spirally wound liner pipes in nonpressure
D 2122 Test Method for Determining Dimensions of Ther-
sewer and conduit rehabilitation, where the spirally wound
4
moplastic Pipe and Fittings
liner pipe is expanded until it presses against the interior
D 2152 Test Method for Adequacy of Fusion of Extruded
surface of the existing sewer or conduit, or, alternatively, where
Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by
the spirally wound liner pipe is inserted as a fixed diameter into
4
Acetone Immersion
the existing sewer or conduit and the annular space between the
F 412 Practice for Installation of Machine Spiral Wound
liner pipe and the existing sewer or conduit is grouted.
Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of
1.3 This specification includes extruded profile strips made
4
Existing Sewers and Conduits
only from materials specified in 5.1.
4
F 1741 Terminology Relating to Plastic Piping Systems
1.4 The values in parentheses are provided for information
2.2 Federal Standard:
only.
Federal Standard No. 123 Marking for Shipment (Civil
1.5 The following precautionary caveat pertains only to the
5
Agencies)
test method portion, Section 11, of this specification: This
2.3 Military Standard:
standard does not purport to address all of the safety concerns,
5
MIL-STD-129 Marking for Shipment and Storage
if any, associated with its use. It is the responsibility of the user
of this standard to establish appropriate safety and health
3. Terminology
practices and determine the applicability of regulatory limita-
3.1 General—Definitions are in accordance with Termi-
tions prior to use.
nologies D 883 and F 412. Abbreviations are in accordance
2. Referenced Documents with Terminology D 1600, unless otherwise indicated.
3.2 Definitions of Terms Specific to This Standard:
2.1 ASTM Standards:
3.2.1 extruded PVC profile strips—a product, available in
D 618 Practice for Conditioning Plastics and Electrical
various widths, consisting of a smooth inside surface and a
ribbed outer surface with mechanically locked male and female
1
This specification is under the jurisdiction of ASTM Committee F17 on Plastic
edges which are self interlocking, or separate locking strips
Piping Systems and is the direct responsibility of Subcommittee F17.67 on
which serve the same purpose (see Fig. 1).
Trenchless Plastic Pipeline Technology.
3.2.2 production run—a continuous extrusion of a given
Current edition approved January 10, 2001. Published March 2001.
profile type.
Orignally published as F 1697–96. Last previous edition F 1697–96.
2
The rehabilitation of existing pipelines and conduits by the insertion of a spiral
3.2.3 spirally wound liner pipe—a product field fabricated
wound liner pipe is covered by patents. (RibLoc Group Limited, Dry Creek, South
Australia, Australia and Danby of North America, Inc., Cary, NC, USA). Interested
parties are invited to submit information regarding the identification of acceptable
3
alternatives to this patented item to the Committee on Standards, ASTM Headquar- Annual Book of ASTM Standards, Vol 08.01.
4
ters, 100 Barr Harbor Drive, West Conshohocken, PA 19428-29590. Your comments Annual Book of ASTM Standards, Vol 08.04.
5
will receive careful consideration at a meeting of the responsible technical Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700
committee wh
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.