ASTM B705-00

Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

SCOPE
1.1 This specification covers welded UNS N06625* and UNS N08825* pipe in the annealed condition (temper) for general corrosion applications.  
1.2 This specification covers pipe sizes in schedules shown in Table 1.  
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 The following precautionary caveat pertains only to the test methods portions, Sections 7 and 13, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 09-May-2000
• ICS: 77.120.40 - Nickel, chromium and their alloys
• Technical Committee: B02 - Nonferrous Metals and Alloys
• Drafting Committee: B02.07 - Refined Nickel and Cobalt and Their Alloys

Relations

• Replaced By: ASTM B705-03 - Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe
• Effective Date: 01-Nov-2003
• Referred By: ASTM B366/B366M-23 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
• Effective Date: 10-May-2000
• Referred By: ASTM B775/B775M-22 - Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
• Effective Date: 10-May-2000

Standards Content (Sample)

NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: B 705 – 00
Standard Specification for
Nickel-Alloy (UNS N06625, N06219 and N08825) Welded
Pipe
This standard is issued under the fixed designation B 705; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 4.2 Class 2—Welded, cold-worked, annealed, and nonde-
structively tested in accordance with 9.2.
1.1 This specification covers welded UNS N06625,* UNS
N06219* and UNS N08825* pipe in the annealed condition
5. Ordering Information
(temper) for general corrosion applications.
5.1 It is the responsibility of the purchaser to specify all
1.2 This specification covers pipe sizes in schedules shown
requirements that are necessary for the safe and satisfactory
in Table 2 of standard B 775.
performance of material ordered under this specification.
1.3 The values stated in inch-pound units are to be regarded
Examples of such requirements include, but are not limited to,
as the standard. The values given in parentheses are for
the following:
information only.
5.1.1 Alloy name or UNS number,
1.4 The following precautionary caveat pertains only to the
5.1.2 ASTM designation,
test methods portion, Section 8, of this specification: This
5.1.3 Dimensions:
standard does not purport to address all of the safety concerns,
5.1.3.1 Pipe size,
if any, associated with its use. It is the responsibility of the user
5.1.3.2 Length (specific or random),
of this standard to establish appropriate safety and health
5.1.4 Class (see 3),
practices and determine the applicability of regulatory limita-
5.1.5 Quantity (feet or number of pieces),
tions prior to use.
5.1.6 Certification— State if certification is required,
2. Referenced Documents 5.1.7 Samples for Product (Check) Analysis—State whether
samples for product (check) analysis should be furnished (7.2),
2.1 ASTM Standards:
and
B 775 Specification for General Requirements for Nickel
5.1.8 Purchaser Inspection—If purchaser wishes to witness
and Nickel Alloy Welded and Seamless Pipe
tests or inspection of material at place of manufacture, the
B 880 Specification for General Requirements for Chemical
purchase order must so state indicating which tests or inspec-
Check Analysis Limits for Nickel, Nickel Alloys and
3 tions are to be witnesses.
Cobalt Alloys
6. Material and Manufacture
3. General Requirement
6.1 Pipe shall be made from flat-rolled alloy by an auto-
3.1 Material furnished in accordance with this specification
matic welding process with no addition of filler metal. Subse-
shall conform to the applicable requirements of the current
quent to welding and prior to final annealing, the material shall
edition of Specification B 775 unless otherwise provided
be cold-worked in either the weld metal only or both weld and
herein.
base metal.
4. Definition of Terms
6.2 Pipe shall be furnished with oxide removed. When
bright annealing is used, descaling is not necessary.
4.1 Class 1—Welded, cold-worked, annealed, and nonde-
structively tested in accordance with 9.1.
7. Chemical Composition
7.1 The material shall conform to the composition limits
This specification is under the jurisdiction of ASTM Committee B02 on specified in Table 1. One test per lot shall be performed.
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee
7.2 If a product (check) analysis is performed by the
B02.07 on Refined Nickel and Cobalt and Their Alloys.
purchaser, the material shall conform to the product (check)
Current edition approved May 10, 2000. Published June 2000. Originally
analysis variations per B 880.
published as B 705 – 82. Last previous edition B 705 – 99.
* New designation established in a
...