iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D1719-95(1999)

(Specification)

Standard Specification for Isobutyl Alcohol

Standard Specification for Isobutyl Alcohol

SCOPE
1.1 This specification covers isobutyl alcohol for use in paint, varnish, lacquer, and related products.
1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheets for materials listed in this specification.

General Information

Status
Historical
Publication Date
09-Dec-1999
ICS
71.080.60 - Alcohols. Ethers
Technical Committee
D01 - Paint and Related Coatings, Materials, and Applications
Drafting Committee
D01.35 - Solvents, Plasticizers, and Chemical Intermediates
Current Stage
Ref Project

Relations

Replaced By
ASTM D1719-05 - Standard Specification for Isobutyl Alcohol
Effective Date
15-May-2005

Buy Standard

ASTM D1719-95(1999) - Standard Specification for Isobutyl AlcoholASTM D1719-95(1999) - Standard Specification for Isobutyl Alcohol
PreviousNext
Technical specification
ASTM D1719-95(1999) - Standard Specification for Isobutyl Alcohol
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 1719 – 95 (Reapproved 1999)
Standard Specification for
,
1 2
Isobutyl Alcohol
This standard is issued under the fixed designation D 1719; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 2.2 U.S. Federal Specification:
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
1.1 This specification covers isobutyl alcohol for use in
of
paint, varnish, lacquer, and related products.
1.2 For specific hazard information and guidance, see the
3. Properties
supplier’s Material Safety Data Sheets for materials listed in
3.1 Isobutyl alcohol shall conform to the following require-
this specification.
ments:
2. Referenced Documents
Apparent specific gravity:
20/20°C 0.802 to 0.804
2.1 ASTM Standards:
25/25°C 0.794 to 0.801
D 268 Guide for Sampling and Testing Volatile Solvents Color, Pt-Co Scale, max 10
A
Distillation range
and Chemical Intermediates for Use in Paint and Related
Nonvolatile matter, max, g/100 mL 0.005
Coatings and Materials B
Water, max, weight % 0.2
C
D 1078 Test Method for Distillation Range of Volatile
Acidity (free acid as acetic), max, 0.003
weight %
Organic Liquids
______________
D 1209 Test Method for Color of Clear Liquids (Platinum-
A
Shall distill entirely within a 2°C range which shall include 107.9°C.
Cobalt Scale) B
This quantitative water limit ensures that the material is miscible without
D 1353 Test Method for Nonvolatile Matter in Volatile turbidity with 19 volumes of 99 % heptane at 20°C.
C
Equivalent to 0.028 mg of KOH per gram of sample.
Solvents for Use in Paint, Varnish, Lacquer, and Related
Products
4. Sampling
D 1364 Test Method for Water in Volatile Solvents (Karl
4.1 This material shall be sampled in accordance with
Fischer Reagent Titration Method)
Practice E 300.
D 1476 Test Method for Heptane Miscibility of Lacquer
Solvents
5. Test Methods
D 1613 Test Method for Acidity in Volatile Solvents and
5.1 The properties enumerated in this specification shall be
Chemical Intermediates Used in Paint, Varnish, Lacquer,
determined in accordance with the following ASTM methods.
and Related Products
5.1.1 Apparent Specific Gravity—Determine the apparent
D 4052 Test Method for Density and Relative Density of
specific gravity by any convenient method that is accurate to
Liquids by Digital Density Meter
the third decimal place, the temperature of both material and
E1 Specification for ASTM Thermometers
water being 20 or 25°C. See Guide D 268 or Test Method
E 300 Practice for Sampling Industr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D4836-09(2023)(Specification)
Standard Specification for Dipropylene Glycol Monomethyl Ether

ABSTRACT
This specification covers dipropylene glycol monomethyl ether (DPM). Dipropylene glycol monomethyl ether shall conform to the requirements specified for the following: (1) assay content, (2) distillation range defined by the initial boiling point and dry point, (3) apparent specific gravity, (4) platinum-cobalt scale color, (5) water content, and (6) acidity (free acid as acetic acid). The sampling and test methods to determine conformance to the specified properties are given.
SCOPE
1.1 This specification covers dipropylene glycol monomethyl ether (DPM).  
Note 1: Dipropylene glycol monomethyl ether (DPM) is a mixture of isomers, the predominant isomer being 1-(2-methoxy-1-methylethoxy)-2-propanol.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For specific hazard information and guidance, consult the supplier’s Safety Data Sheet for materials listed in this standard.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4794-94(2022)e1(Test Method)
Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography

ABSTRACT
This test method is applicable to the determination of ethoxyl or hydroxyethoxyl substitution in cellulose ether products by a Zeisel gas chromatographic technique. The equipment and materials to be used shall include reagents, gas chromatograph, electronic integrator, column, syringe, reaction vials, caps, heating block, and a cover. The following reagents are as follows: iodoethane, O-xylene, toluene, hydrochloric acid, and colume packing. When a cellulose ether containing ethyl or hydroxyethyl substitutes is allowed to react with hydriodic acid, one mole of iodoethane is liberated for each mole of ethoxyl or hydroxyethoxyl ether substituted on the cellulose chain. The iodoethane is extracted in-situ with o-xylene and quantitated by gas chromatography using an internal standard technique. It is recommended to run duplicate samples.
SCOPE
1.1 This test method is applicable to the determination of ethoxyl or hydroxyethoxyl substitution in cellulose ether products by a Zeisel gas chromatographic technique.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 5 and 9.1.8.1.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D1969-22(Specification)
Standard Specification for 2-Ethylhexanol

ABSTRACT
This specification the properties and requirements for regular and monomer grade 2-ethylhexanol. Specimens shall be appropriately sampled and tested to evaluate their conformance to specified values of the following physical and chemical properties: acidity (free acid as acetic acid); apparent specific gravity; assay content; color (Pt-Co scale); carbonyl as 2-ethylhexanal; ethyl methyl pentanol content; sulfuric acid color; and water content.
SCOPE
1.1 This specification covers regular and monomer grade 2-ethylhexanol.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5008-22(Test Method)
Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

SIGNIFICANCE AND USE
4.1 This test method is used to determine the purity value and ethyl methyl pentanol content of 2-ethylhexanol.
SCOPE
1.1 This test method covers the determination of ethyl methyl pentanol content and purity value of 2-ethylhexanol.  
1.2 Water and acid cannot be determined by this test method and must be determined in accordance with Test Methods D1613 and E203 and those results used to normalize the chromatographic data.  
1.3 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see 6.1.1.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D1257-22(Specification)
Standard Specification for High-Gravity Glycerin

ABSTRACT
This specification covers high-gravity glycerin (98.7 weight%, minimum) for use in the manufacture of alkyd and other synthetic resins. The following properties of glycerin shall be determined: color, Pt-Co scale, sulfate ash content(weight%), and acid value.
SCOPE
1.1 This specification covers high-gravity glycerin (98.7 weight %, minimum) for use in the manufacture of alkyd and other synthetic resins.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value, shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D3128-07(2021)(Specification)
Standard Specification for 2-Methoxyethanol

ABSTRACT
This specification covers 2-methoxyethanol. 2-methoxyethanol shall conform to the requirements specified for the following: (1) apparent specific gravity, (2) Pt-Co scale color, (3) distillation range defined by the initial boiling point and dry point, (4) water content, and (5) acidity (free acid as acetic acid). The sampling and test methods to determine conformance to the specified properties are given.
SCOPE
1.1 This specification covers 2-methoxyethanol.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 For hazard information and guidance, see the supplier’s Material Safety Data Sheet for materials listed in this specification.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D330-07(2021)(Specification)
Standard Specification for 2-Butoxyethanol

ABSTRACT
This specification covers the properties and requirements for 2-butoxyethanol. Specimens shall be suitably sampled and tested, and shall meet specified values of the following properties: apparent specific gravity; color (Pt-Co scale); distillation range (initial boiling point and dry point); water content; and acidity (free acid as acetic acid).
SCOPE
1.1 This specification covers 2-butoxyethanol.  
1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 For specific hazard information and guidance, see the supplier’s Material Safety Data Sheet for materials listed in this specification.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D1133-13(2021)(Test Method)
Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

SIGNIFICANCE AND USE
4.1 The kauri-butanol value is used as a measure of solvent power of hydrocarbon solvents. High kauri-butanol values indicate relatively strong solvency.
SCOPE
1.1 This test method covers the determination of the relative solvent power of hydrocarbon solvents used in paint and lacquer formulations. This test method is suitable for use with solvents having an initial boiling point over 40 °C and a dry point under 300 °C when determined in accordance with the procedures in Note 1.  
Note 1: Test Method D86 is used to determine the initial boiling point and dry point for mineral spirits and similar petroleum solvents. Test Method D1078 is used for pure compounds and narrow boiling range cuts.  
1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 For specific hazard information and guidance, consult the supplier's Material Safety Data Sheet.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D1363-06(2019)(Test Method)
Standard Test Method for Permanganate Time of Acetone and Methanol

SIGNIFICANCE AND USE
4.1 The permanganate time can be used to judge the presence of oxidizable materials that may be associated with manufacture or contamination during distribution and to assess compliance with a specification.  
4.2 Many chemical processes that use acetone or methanol, or both, involve catalyst, metals, or ligand complexes that are sensitive to oxidation. Since oxidizable contaminants may affect the efficiency of these processes, this test method provides a comparative test for manufacturing control and assessing compliance with a specification.
SCOPE
1.1 This test method covers the detection in acetone and methanol of the presence of impurities that reduce potassium permanganate.  
1.2 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.4 For specific hazard information and guidance, consult the supplier's Material Safety Data Sheet.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D770-11(2019)(Specification)
Standard Specification for Isopropyl Alcohol,

ABSTRACT
This specification covers the properties and requirements for isopropyl alcohol. Specimens shall be suitably sampled and tested, and shall adhere accordingly to specified values of the following properties: apparent specific gravity; color (Pt-Co scale); distillation range; nonvolatile matter content; odor; water content; acidity (acetic acid); and water miscibility.
SCOPE
1.1 This specification covers isopropyl alcohol (99 % grade).  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 The following applies to all specified limits in this standard: for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 For hazard information and guidance, see the supplier's Material Safety Data Sheet.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off