ASTM D4099-95

Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999)

SCOPE
1.1 This specification establishes the requirements for material properties and performance characteristics for prime windows and sliding glass doors manufactured of rigid poly(vinyl chloride) (PVC). Windows and doors included in this specification shall be complete assemblies (systems) containing all necessary hardware, anchors, and miscellaneous equipment as specified herein.
1.2 This specification includes common types of PVC window and door types presently in production. No inference is to be drawn as to the acceptability of other window and door types not listed.
1.3 Although this specification establishes performance criteria, there is no intent to imply acceptable use of PVC windows and doors in a particular building. The specifying agency shall establish all requirements for a particular application and determine suitability of the product for its anticipated use.
1.4 This specification is limited to prime windows and doors and does not include secondary windows, storm windows or storm doors. Note 1-There are no ISO standards covering the primary subject matter of this specification.
1.5 This specification allows the use of recycled material, providing that all requirements of Specification D4726 are met.  
1.6 The values stated in inch-pound units are to be regarded as the standard.
1.7 The following precautionary caveat pertains only to the test method portion, Section 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1994
• Withdrawal Date: 09-Jul-1999
• ICS: 91.060.50 - Doors and windows
• Technical Committee: D20 - Plastics
• Drafting Committee: D20.24 - Plastic Building Products

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Please contact ASTM International (www.astm.org) for the latest information.
An American National Standard
Designation: D 4099 – 95
Standard Specification for
Poly(Vinyl Chloride) (PVC) Prime Windows/Sliding Glass
,
1 2
Doors
This standard is issued under the fixed designation D 4099; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (ϵ) indicates an editorial change since the last revision or reapproval.
1. Scope 2. Referenced Documents
2.1 ASTM Standards:
1.1 This specification establishes the requirements for ma-
terial properties and performance characteristics for prime A165 Specification for Electrodeposited Coatings of Cad-
3
windows and sliding glass doors manufactured of rigid poly- mium on Steel
(vinyl chloride) (PVC). Windows and doors included in this B456 Specification for Electrodeposited Coatings of Cop-
specification shall be complete assemblies (systems) contain- per Plus Nickel Plus Chromium and Nickel Plus Chro-
4
ing all necessary hardware, anchors, and miscellaneous equip- mium
ment as specified herein. B633 Specification for Electrodeposited Coatings of Zinc
4
1.2 This specification includes common types of PVC on Iron and Steel
5
window and door types presently in production. No inference C1036 Specification for Flat Glass
istobedrawnastotheacceptabilityofotherwindowanddoor C1048 Specification for Heat-Treated Flat Glass—Kind
5
types not listed. HS, Kind FT Coated and Uncoated Glass
6
1.3 Although this specification establishes performance cri- D883 Terminology Relating to Plastics
teria, there is no intent to imply acceptable use of PVC D1600 Terminology for Abbreviated Terms Relating to
6
windows and doors in a particular building. The specifying Plastics
7
agency shall establish all requirements for a particular appli- D1898 Practice for Sampling of Plastics
cation and determine suitability of the product for its antici- D3656 SpecificationforInsectScreeningandLouverCloth
8
pated use. Woven from Vinyl-Coated Glass Fiber Yarn
9
1.4 Thisspecificationislimitedtoprimewindowsanddoors D3892 Practice for Packaging/Packing of Plastics
and does not include secondary windows, storm windows or D4028 Specification for Solar Screening Woven from
8
storm doors. Vinyl-Coated Fiber Glass Yarn
D4726 Specification for White Rigid Poly(Vinyl Chloride)
NOTE 1—There are no ISO standards covering the primary subject
(PVC) Exterior Profile Extrusions Used for Assembled
matter of this specification.
10
Windows and Doors
1.5 This specification allows the use of recycled material,
E283 TestMethodforDeterminingtheRateofAirLeakage
providing that all requirements of Specification D4726D4726
Through Exterior Windows, Curtain Walls, and Doors
are met.
Under Specified Pressure Differences Across the Speci-
1.6 The values stated in inch-pound units are to be regarded
11
men
as the standard.
E330 Test Method for Structural Performance of Exterior
1.7 The following precautionary caveat pertains only to the
Windows, CurtainWalls, and Doors by Uniform StaticAir
test method portion, Section 11, of this specification: This
11
Pressure Difference
standard does not purport to address all of the safety concerns,
E331 Test Method for Water Penetration of Exterior Win-
if any, associated with its use. It is the responsibility of the user
dows, Curtain Walls, and Doors by Uniform Static Air
of this standard to establish appropriate safety and health
11
Pressure Difference
practices and determine the applicability of regulatory limita-
tions prior to use.
3
Discontinued; see 1987 Annual Book of ASTM Standards, Vol 02.05.
1 4
This specification is under the jurisdiction of ASTM Committee D-20 on Annual Book of ASTM Standards, Vol 02.05.
5
PlasticsandisthedirectresponsibilityofSubcommitteeD20.24onPlasticBuilding Annual Book of ASTM Standards, Vol 15.02.
6
Products. Annual Book of ASTM Standards, Vol 08.01.
7
Current edition approved Dec. 10, 1995. Published February 1996. Originally Annual Book of ASTM Standards, Vol 08.02.
8
published as D4099–82. Last previous edition D4099–93. Annual Book of ASTM Standards, Vol 07.02.
2 9
Sections 1, 8.1.1, 8.3, 9.1.1, 11.2, 15 and Table 1 revised to clarify content, to Annual Book of ASTM Standards, Vol 08.03.
10
rationalize with AAMA 101 standard, to upgrade technical requirements and Annual Book of ASTM Standards, Vol 08.04.
11
accomodate recycled materials. Annual Book of ASTM Standards, Vol 04.07.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Please contact ASTM International (www.astm.org) for the latest information.
D 4099
...