ASTM C615/C615M-11

Standard Specification for Granite Dimension Stone

ABSTRACT
This specification covers the material characteristics, physical requirements, and sampling method appropriate to the selection of granite dimension stone for general building and structural purposes. Granite dimension stone shall include stone that is sawed, cut, split, or otherwise finished or shaped, and shall specifically exclude molded, cast, or otherwise artificially aggregated units composed of fragments, crushed and broken stone. Granite stones covered here shall be used for: exterior and interior cladding of buildings and structures; curbstone, paving, and landscape features; structural components having established dimensions; grade separations and retaining walls; and monuments. The physical property requirements to which granite stones shall adhere to are absorption by weight, density, compressive weight, modulus of rupture, abrasion resistance, and flexural strength.
SCOPE
1.1 This specification covers the material characteristics, physical requirements, and sampling appropriate to the selection of granite for general building and structural purposes. Refer to Guides C1242 and C1528 for the appropriate selection and use of granite dimension stone.
1.2 Granite dimension stone shall include stone that is sawed, cut, split, or otherwise finished or shaped, and shall specifically exclude molded, cast, or otherwise artificially aggregated units composed of fragments, crushed and broken stone.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

General Information

• Status: Historical
• Publication Date: 31-Dec-2010
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: C18 - Dimension Stone
• Drafting Committee: C18.03 - Material Specifications

Relations

• Replaces: ASTM C615/C615M-10 - Standard Specification for Granite Dimension Stone
• Effective Date: 01-Jan-2011
• Replaced By: ASTM C615/C615M-18 - Standard Specification for Granite Dimension Stone
• Effective Date: 01-Sep-2018

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:C615/C615M −11
Standard Specification for
1
Granite Dimension Stone
This standard is issued under the fixed designation C615/C615M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope C1353 Test Method for Abrasion Resistance of Dimension
Stone Subjected to Foot Traffic Using a Rotary Platform,
1.1 This specification covers the material characteristics,
Double-Head Abraser
physical requirements, and sampling appropriate to the selec-
C1528 Guide for Selection of Dimension Stone
tion of granite for general building and structural purposes.
Refer to Guides C1242 and C1528 for the appropriate selection
3. Terminology
and use of granite dimension stone.
3.1 Definitions—All definitions are in accordance with Ter-
1.2 Granite dimension stone shall include stone that is
minology C119.
sawed, cut, split, or otherwise finished or shaped, and shall
specifically exclude molded, cast, or otherwise artificially
4. Classification
aggregated units composed of fragments, crushed and broken
4.1 Granitedimensionstoneunderthisspecificationshallbe
stone.
granite used for:
1.3 The values stated in either SI units or inch-pound units
4.1.1 Exterior and interior cladding of buildings and struc-
are to be regarded separately as standard. The values stated in
tures;
each system may not be exact equivalents; therefore, each
4.1.2 Curbstone, paving, and landscape features;
system shall be used independently of the other. Combining
4.1.3 Structural components having established dimensions;
values from the two systems may result in non-conformance
4.1.4 Grade separations and retaining walls; and
with the standard.
4.1.5 Monuments.
2. Referenced Documents 5. Physical Properties
2
2.1 ASTM Standards: 5.1 Granite supplied under this specification shall conform
C97/C97M Test Methods for Absorption and Bulk Specific to the physical requirements prescribed in Table 1. See 5.1.2
Gravity of Dimension Stone for possible variations from this table.
C99/C99M Test Method for Modulus of Rupture of Dimen- 5.1.1 The minimum compressive strength, flexural strength,
sion Stone and modulus of rupture shall be based upon the minimum
C119 Terminology Relating to Dimension Stone average strength of specimens tested in four conditions: wet or
C170/C170M Test Method for Compressive Strength of dry and parallel or perpendicular to rift.
Dimension Stone 5.1.2 The physical properties given in Table 1 represent
C241/C241M Test Method forAbrasion Resistance of Stone properties of granite that have a history of successful use for
Subjected to Foot Traffic general building and structural purposes. Granite with strength
or abrasion resistance less than the minimum values prescribed
C1242 Guide for Selection, Design, and Installation of
Dimension Stone Attachment Systems in Table 1 may be used provided that competent engineering
authority has evaluated relevant characteristics of the granite.
C880/C880M Test Method for Flexural Strength of Dimen-
sion Stone This evaluation shall consider both structural effects and
material characteristics such as durability, permanent volume
change, modulus of elasticity. thermal expansion, and the like.
1
This specification is under the jurisdiction of ASTM Committee C18 on
5.2 Granite shall be sound, durable, and free of spalls,
Dimension Stone and is the direct responsibility of Subcommittee C18.03 on
cracks, open seams, pits, or other defects that are likely to
Material Specifications.
Current edition approved Jan. 1, 2011. Published January 2011. Originally impair its structural integrity in its intended use.
approved in 1968. Last previous edition approved in 2010 as C 615/C 615M– 10.
5.3 Granite shall be free of minerals that may cause objec-
DOI:10.1520/C615_C615M-11.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or tionable staining under normal environments of use.
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
5.4 The desired color and texture, with their permissible
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. natural variations in material characteristics for all material to
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
C615/C615M−11
TABLE 1 Physical Requirements
NOTE 1—The material property values in Table 1 were established using samples prepared according to the individual test methods. Finishes, other
than those specified in the individual test methods, may result in a devia
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:C615/C615M–10 Designation: C615/C615M – 11
Standard Specification for
1
Granite Dimension Stone
This standard is issued under the fixed designation C615/C615M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope
1.1This specification covers the material characteristics, physical requirements, and sampling appropriate to the selection of
granite for general building and structural purposes.
1.1 This specification covers the material characteristics, physical requirements, and sampling appropriate to the selection of
granite for general building and structural purposes. Refer to Guides C1242 and C1528 for the appropriate selection and use of
granite dimension stone.
1.2 Granite dimension stone shall include stone that is sawed, cut, split, or otherwise finished or shaped, and shall specifically
exclude molded, cast, or otherwise artificially aggregated units composed of fragments, crushed and broken stone.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each
system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the
two systems may result in non-conformance with the standard.
2. Referenced Documents
2
2.1 ASTM Standards:
C97/C97M Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99/C99M Test Method for Modulus of Rupture of Dimension Stone
C119 Terminology Relating to Dimension Stone
C170/C170M Test Method for Compressive Strength of Dimension Stone
C241/C241M Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C1242 Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
C880/C880M Test Method for Flexural Strength of Dimension Stone
C1353 Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform,
Double-Head Abraser Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary
Platform, Double-Head Abraser
C1528 Guide for Selection of Dimension Stone
3. Terminology
3.1 Definitions—All definitions are in accordance with Terminology C119.
4. Classification
4.1 Granite dimension stone under this specification shall be granite used for:
4.1.1 Exterior and interior cladding of buildings and structures;
4.1.2 Curbstone, paving, and landscape features;
4.1.3 Structural components having established dimensions;
4.1.4 Grade separations and retaining walls; and
4.1.5 Monuments.
1
This specification is under the jurisdiction of ASTM Committee C18 on Dimension Stone and is the direct responsibility of Subcommittee C18.03 on Material
Specifications.
Current edition approved Sept. 1, 2010. Published October 2010. Originally approved in 1968. Last previous edition approved in 2003 as C 615–03. DOI:10.1520/
C615_C615M-10.
Current edition approved Jan. 1, 2011. Published January 2011. Originally approved in 1968. Last previous edition approved in 2010 as C 615/C 615M– 10.
DOI:10.1520/C615_C615M-11.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
C615/C615M – 11
5. Physical Properties
5.1 Granite supplied under this specification shall conform to the physical requirements prescribed in Table 1. See 5.1.2 for
possible variations from this table.
5.1.1 The minimum compressive strength, flexural strength, and modulus of rupture shall be based upon the minimum average
strength of specimens tested in four conditions: wet or dry and parallel or perpendicular to rift.
5.1.2 The physical properties given in Table 1 represent properties of granite that have a history of successful use for general
building and structural purposes. Granite with strength or abrasion resistance less than the minimum values prescribed in Table 1
may be used provided that competent engineering authority has evaluated relevant characte
...