ASTM D5063-90(2012)
(Guide)Standard Guide for Use of Certification of Coating Conformance Form (Withdrawn 2021)
Standard Guide for Use of Certification of Coating Conformance Form (Withdrawn 2021)
ABSTRACT
This guide for certification of coating conformance form provides procurement information concerning products being furnished in accordance with a specific coating specification and additional requirements contained in the purchase order. The certification form is divided into four headings: General Type and Description(I), Buyer Information(II), Seller Information (III), and Certification (IV). The first heading consists of the following information: generic type, manufacturer's designation, specification number, formula number, component number, component identification, and color. The second heading consists purchase order number, release number, part number, item number, and stock number. The third heading consists of seller's representative, batch number, lot number, date of manufacture, and date of certification expiration. The last heading is a paragraph describing the certification.
SCOPE
1.1 This certification of coating conformance form provides procurement information concerning products being furnished in accordance with a specific coating specification and additional requirements contained in the purchase order (see Fig. 1).
CERTIFICATION OF COATING CONFORMANCE FORM
Number:
Date:
I. GENERAL TYPE AND DESCRIPTION:
Generic Type:
Manufacturer's Designation:
Specification Number:
Formula Number:
Number of Components:
Component Identification (if applicable):
Color:
II. BUYER INFORMATION:
Name and Address:
Purchase Order Number:
Release Number (if applicable):
Part Number (if applicable):
Item Number (if applicable):
Stock Number (if applicable):
III. SELLER INFORMATION:
Name and Address:
Seller's Representative:
(Include Telephone Number)
Batch Number:
Lot No.:
Date of Manufacture:
Date of Expiration of Certification:
IV. CERTIFICATION:
This is to certify that the above material being furnished has been manufactured in accordance with the specification and meets all specification requirements contained in the above purchase order.
NAME AND TITLE SIGNATURE DATE
FIG. 1 Certification Form
1.2 The completed form can be utilized to help evaluate the acceptability of the paint being furnished.
WITHDRAWN RATIONALE
This certification of coating conformance form provided procurement information concerning products being furnished in accordance with a specific coating specification and additional requirements contained in the purchase order.
Formerly under the jurisdiction of Committee D01 on Paint and Related Coatings, Materials, and Applications, this guide was withdrawn in January 2021 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
General Information
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D5063 −90(Reapproved 2012)
Standard Guide for
Use of Certification of Coating Conformance Form
This standard is issued under the fixed designation D5063; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3. Instructions for Completing Certification Form
1.1 This certification of coating conformance form provides
3.1 Use only known and industry accepted descriptions.
procurement information concerning products being furnished
Standard definitions of terms relating to paint, varnish, lacquer,
in accordance with a specific coating specification and addi-
and related materials are provided in Terminology D16 (see
tional requirements contained in the purchase order (see Fig.
Fig. 2
1).
3.2 The sections are self-explanatory. Applicable informa-
1.2 The completed form can be utilized to help evaluate the
tion in Section II should be provided by the buyer. Applicable
acceptability of the paint being furnished.
information in Section III should be provided by the seller.
2. Referenced Documents
3.3 For two-component coatings, separate forms should be
2.1 ASTM Standards:
provided for each component, if appropriate.
D16 Terminology for Paint, Related Coatings, Materials, and
Applications
4. Keywords
4.1 certification form; conformance form
This guide is under the jurisdiction of ASTM Committee D01 on Paint and
Related Coatings, Materials, and Applications and is the direct responsibility of
Subcommittee D01.45 on Marine Coatings.
Current edition approved June 1, 2012. Published August 2012. Originally
approved in 1990. Last previous edition approved in 2004 as D5063 – 90 (2004).
DOI: 10.1520/D5063-90R12.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
D5063−90(2012)
CERTIFICATION OF COATING CONFORMANCE FORM Number:
Date:
I. GENERAL TYPE AND DESCRIPTION:
Generic Type:
Manufacturer’s Designation:
Specification Number:
Formula Number:
Number of Components:
Component Identification (if applicable):
Color:
II. BUYER INFORMATION:
Name and Address:
Purchase Order Number:
Release Number (if applicable):
Part Number (if applicable):
Item Number (if applicable):
Stock Number (if applicable):
III. SELLER INFORMATION:
Name and Address:
Seller’s Representative:
(Include Telephone Number)
Batch Number:
Lot No.:
Date of M
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.