ASTM B283/B283M-17a
(Specification)Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
ABSTRACT
This specification establishes the requirements for copper and copper die forgings produced by hot pressing method. The forgings included here are designated with the following Copper or Copper Alloy UNS Nos.: C11000 (copper), C14500 (copper-tellurium alloy), C14700 (copper-sulfur alloy), C36500 (leaded Muntz metal), C37000 (free-cutting Muntz metal), C37700 (forging brass), C46400 (naval brass), C48200 (medium leaded naval brass), C48500 (leaded naval brass), C61900 (aluminum bronze), C62300 (9% aluminum bronze), C63000 and C63200 (aluminum-nickel bronze), C64200 (aluminum-silicon bronze), C64210 (6.7% aluminum-silicon bronze), C65500 (high-silicon bronze), C67500 (manganese bronze), C67600, C69300 (copper-zinc-silicon alloy), C70620 (90% copper-10% nickel alloy), C71520 (70% copper-30% nickel alloy), and C77400 (45% nickel-10% silver alloy). The materials for manufacture shall be rods, billets, or blanks of such purity and soundness as to be suitable for processing by hot pressing. Products shall be tested to examine their conformance to mechanical (tensile and yield strengths, and elongation), dimensional, and chemical composition requirements.
SCOPE
1.1 This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing method. The following copper and copper alloys are included:
Copper or Copper Alloy UNS No.
Name
C11000
copper
C14500
copper-tellurium
C14700
copper-sulfur
C27450
plumbing brass
C27451
plumbing brass
C27453
copper zinc alloy
C28500
copper-zinc brass
C35330
leaded brass
C36500
leaded Muntz metal
C37000
free-cutting Muntz metal
C37700
forging brass
C46400
naval brass
C46500
naval brass, arsenical
C46750
tin brass
C48200
medium leaded naval brass
C48500
leaded naval brass
C48600
naval brass
C49250
copper-zinc-bismuth alloy
C49255
copper-zinc-bismuth-nickel alloy
C49260
copper-zinc-bismuth alloy
C49265
copper-zinc-tin-bismuth, low leaded
C49300
copper-zinc-tin-bismuth alloy
C49340
copper-zinc-tin-bismuth alloy
C49345
copper-zinc-tin-bismuth, low leaded
C49350
copper-zinc-tin-bismuth alloy
C49355
bismuth brass
C61900
aluminum bronze
C62300
aluminum bronze, 9 %
C63000
aluminum-nickel bronze
C63200
aluminum-nickel bronze
C64200
aluminum-silicon bronze
C64210
aluminum-silicon bronze, 6.7 %
C65500
high-silicon bronze (A)
C67500
manganese bronze (A)
C67600
. . .
C69300
copper-zinc-silicon
C70620
copper-nickel 90-10
C71520
copper-nickel 70-30
C77400
nickel silver, 45-10
C87700
silicon bronze
C87710
silicon bronze
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Note 1: Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for welded applications with seawater exposure.
Note 2: Guidelines for design and development of forgings are included in Appendix X2.
Note 3: Wrought product intended for hot forging is described in Specification B124/B124M.
1.3 The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standar...
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:B283/B283M −17a
Standard Specification for
1
Copper and Copper-Alloy Die Forgings (Hot-Pressed)
This standard is issued under the fixed designation B283/B283M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope* 1.2 Units—The values stated in either SI units or inch-
pound units are to be regarded separately as standard. The
1.1 This specification establishes the requirements for cop-
values stated in each system may not be exact equivalents;
per and copper alloy die forgings produced by the hot pressing
therefore,eachsystemshallbeusedindependentlyoftheother.
method. The following copper and copper alloys are included:
Combining values from the two systems may result in non-
Copper or Copper Alloy UNS No. Name
conformance with the standard.
C11000 copper
NOTE 1—Nominal composition and relative forgeability ratings are
C14500 copper-tellurium
given in Appendix X1. Copper-nickel alloys C70620 and C71520 are
C14700 copper-sulfur
C27450 plumbing brass
intended for welded applications with seawater exposure.
C27451 plumbing brass
NOTE 2—Guidelines for design and development of forgings are
C27453 copper zinc alloy
included in Appendix X2.
C28500 copper-zinc brass
NOTE 3—Wrought product intended for hot forging is described in
C35330 leaded brass
Specification B124/B124M.
C36500 leaded Muntz metal
C37000 free-cutting Muntz metal 1.3 The following safety caveat pertains only to Section 10
C37700 forging brass
of this specification. This standard does not purport to address
C46400 naval brass
all of the safety concerns, if any, associated with its use. It is
C46500 naval brass, arsenical
C46750 tin brass
the responsibility of the user of this standard to establish
C48200 medium leaded naval brass
appropriate safety, health, and environmental practices and
C48500 leaded naval brass
determine the applicability of regulatory limitations prior to
C48600 naval brass
C49250 copper-zinc-bismuth alloy
use.
C49255 copper-zinc-bismuth-nickel alloy
1.4 This international standard was developed in accor-
C49260 copper-zinc-bismuth alloy
dance with internationally recognized principles on standard-
C49265 copper-zinc-tin-bismuth, low leaded
C49300 copper-zinc-tin-bismuth alloy
ization established in the Decision on Principles for the
C49340 copper-zinc-tin-bismuth alloy
Development of International Standards, Guides and Recom-
C49345 copper-zinc-tin-bismuth, low leaded
mendations issued by the World Trade Organization Technical
C49350 copper-zinc-tin-bismuth alloy
C49355 bismuth brass
Barriers to Trade (TBT) Committee.
C61900 aluminum bronze
C62300 aluminum bronze, 9 %
2. Referenced Documents
C63000 aluminum-nickel bronze
C63200 aluminum-nickel bronze
2
2.1 ASTM Standards:
C64200 aluminum-silicon bronze
C64210 aluminum-silicon bronze, 6.7 % B124/B124MSpecification for Copper and Copper Alloy
C65500 high-silicon bronze (A)
Forging Rod, Bar, and Shapes
C67500 manganese bronze (A)
B249/B249MSpecification for General Requirements for
C67600 . . .
C69300 copper-zinc-silicon Wrought Copper and Copper-Alloy Rod, Bar, Shapes and
C70620 copper-nickel 90-10
Forgings
C71520 copper-nickel 70-30
B846Terminology for Copper and Copper Alloys
C77400 nickel silver, 45-10
C87700 silicon bronze
E8/E8MTest Methods for Tension Testing of Metallic Ma-
C87710 silicon bronze
terials
E62Test Methods for Chemical Analysis of Copper and
1
ThisspecificationisunderthejurisdictionofASTMCommitteeB05onCopper
and CopperAlloys and is the direct responsibility of Subcommittee B05.02 on Rod,
2
Bar, Wire, Shapes and Forgings. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Oct. 1, 2017. Published November 2017. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 1953. Last previous edition approved in 2017 as B283/B283M–17. Standards volume information, refer to the standard’s Document Summary page on
DOI: 10.1520/B0283_B0283M-17A. the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
B283/B283M−17a
3
CopperAlloys(PhotometricMethods)(Withdrawn2010) 5. Ordering Information
E75Test Methods for Chemical Analysis of Copper-Nickel
5.1 Include the following information when placing orders
3
and Copper-Nickel-Zinc Alloys (Withdrawn 2010)
for products to this specification,
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: B283/B283M − 17 B283/B283M − 17a
Standard Specification for
1
Copper and Copper-Alloy Die Forgings (Hot-Pressed)
This standard is issued under the fixed designation B283/B283M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope*
1.1 This specification establishes the requirements for copper and copper alloy die forgings produced by the hot pressing
method. The following copper and copper alloys are included:
Copper or Copper Alloy
UNS No. Name
C11000 copper
C14500 copper-tellurium
C14700 copper-sulfur
C27450 plumbing brass
C27451 plumbing brass
C27453 copper zinc alloy
C28500 copper-zinc brass
C35330 leaded brass
C36500 leaded Muntz metal
C37000 free-cutting Muntz metal
C37700 forging brass
C46400 naval brass
C46500 naval brass, arsenical
C46750 tin brass
C48200 medium leaded naval brass
C48500 leaded naval brass
C48600 naval brass
C49250 copper-zinc-bismuth alloy
C49255 copper-zinc-bismuth-nickel alloy
C49260 copper-zinc-bismuth alloy
C49265 copper-zinc-tin-bismuth, low leaded
C49300 copper-zinc-tin-bismuth alloy
C49340 copper-zinc-tin-bismuth alloy
C49345 copper-zinc-tin-bismuth, low leaded
C49350 copper-zinc-tin-bismuth alloy
C49355 bismuth brass
C61900 aluminum bronze
C62300 aluminum bronze, 9 %
C63000 aluminum-nickel bronze
C63200 aluminum-nickel bronze
C64200 aluminum-silicon bronze
C64210 aluminum-silicon bronze, 6.7 %
C65500 high-silicon bronze (A)
C67500 manganese bronze (A)
C67600 . . .
C69300 copper-zinc-silicon
C70620 copper-nickel 90-10
C71520 copper-nickel 70-30
C77400 nickel silver, 45-10
C87700 silicon bronze
C87710 silicon bronze
1.2 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated
in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values
from the two systems may result in non-conformance with the standard.
1
This specification is under the jurisdiction of ASTM Committee B05 on Copper and Copper Alloys and is the direct responsibility of Subcommittee B05.02 on Rod, Bar,
Wire, Shapes and Forgings.
Current edition approved April 1, 2017Oct. 1, 2017. Published April 2017November 2017. Originally approved in 1953. Last previous edition approved in 20162017 as
B283/B283M–16a.–17. DOI: 10.1520/B0283_B0283M-17.10.1520/B0283_B0283M-17A.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
B283/B283M − 17a
NOTE 1—Nominal composition and relative forgeability ratings are given in Appendix X1. Copper-nickel alloys C70620 and C71520 are intended for
welded applications with seawater exposure.
NOTE 2—Guidelines for design and development of forgings are included in Appendix X2.
NOTE 3—Wrought product intended for hot forging is described in Specification B124/B124M.
1.3 The following safety caveat pertains only to Section 10 of this specification. This standard does not purport to address all
of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate
safety safety, health, and healthenvironmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
B124/B124M Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B249/B249M Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B846 Terminology for Copper and Copper Alloys
E8/E8M Test Methods for Tension Testing of Metallic Materials
3
E62 Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods) (Withdrawn 2010)
3
E75 Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.