iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM B899-06

(Terminology)

Standard Terminology Relating to Non-ferrous Metals and Alloys

Standard Terminology Relating to Non-ferrous Metals and Alloys

SCOPE
1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02.
1.2 To standardize the terminology used in these documents.
1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.

General Information

Status
Historical
Publication Date
30-Nov-2006
ICS
77.120.01 - Non-ferrous metals in general
Technical Committee
B02 - Nonferrous Metals and Alloys
Drafting Committee
B02.91 - Terminology
Current Stage
Ref Project

Relations

Replaces
ASTM B899-05 - Standard Terminology Relating to Non-ferrous Metals and Alloys
Effective Date
01-Dec-2006
Replaced By
ASTM B899-09 - Standard Terminology Relating to Non-ferrous Metals and Alloys
Effective Date
01-Oct-2009
Referred By
ASTM B366/B366M-23 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
Effective Date
01-Dec-2006
Referred By
ASTM B435-22 - Standard Specification for Heat and Corrosion Resistant High Temperature Alloy Plate, Sheet, and Strip
Effective Date
01-Dec-2006
Referred By
ASTM B960-18(2022) - Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
Effective Date
01-Dec-2006
Referred By
ASTM B1022-22 - Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process
Effective Date
01-Dec-2006
Referred By
ASTM B327-21 - Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
Effective Date
01-Dec-2006
Referred By
ASTM B444-23 - Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloys<brk/> and Nickel-Chromium-Molybdenum-Silicon Alloy Pipe and Tube
Effective Date
01-Dec-2006
Referred By
ASTM B517-19 - Standard Specification for Welded Nickel-Chromium-Iron-Alloy Pipe
Effective Date
01-Dec-2006
Referred By
ASTM B675-22 - Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy Welded Pipe
Effective Date
01-Dec-2006
Referred By
ASTM B897-23 - Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
Effective Date
01-Dec-2006
Referred By
ASTM B952/B952M-19 - Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
Effective Date
01-Dec-2006
Referred By
ASTM B6-23 - Standard Specification for Zinc
Effective Date
01-Dec-2006
Referred By
ASTM B924-02(2022) - Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
Effective Date
01-Dec-2006
Referred By
ASTM B793-16(2021) - Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
Effective Date
01-Dec-2006

Buy Standard

ASTM B899-06 - Standard Terminology Relating to Non-ferrous Metals and AlloysASTM B899-06 - Standard Terminology Relating to Non-ferrous Metals and Alloys
PreviousNext
Standard
ASTM B899-06 - Standard Terminology Relating to Non-ferrous Metals and Alloys
English language
7 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:B899–06
Standard Terminology
1
Relating to Non-ferrous Metals and Alloys
This standard is issued under the fixed designation B899; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope B240 Specification for Zinc and Zinc-Aluminum (ZA) Al-
loys in Ingot Form for Foundry and Die Castings
1.1 To promote precise understanding and interpretation of
B327 Specification for MasterAlloys Used in Making Zinc
standards, reports, and other technical writings promulgated by
Die Casting Alloys
Committee B02.
B333 Specification for Nickel-Molybdenum Alloy Plate,
1.2 Tostandardizetheterminologyusedinthesedocuments.
Sheet, and Strip
1.3 To explain the meanings of technical terms used within
B339 Specification for Pig Tin
these documents for those not conversant with them.
B407 Specification for Nickel-Iron-ChromiumAlloy Seam-
2. Referenced Documents
less Pipe and Tube
2
B408 Specification for Nickel-Iron-Chromium Alloy Rod
2.1 ASTM Standards:
and Bar
B6 Specification for Zinc
B418 Specification for Cast and Wrought Galvanic Zinc
B29 Specification for Refined Lead
Anodes
B32 Specification for Solder Metal
B423 Specification for Nickel-Iron-Chromium-
B39 Specification for Nickel
Molybdenum-Copper Alloy (UNS N08825 and N08221)*
B69 Specification for Rolled Zinc
Seamless Pipe and Tube
B86 Specification for Zinc and Zinc-Aluminum (ZA)Alloy
B425 Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS
Foundry and Die Castings
N08825 and UNS N08221)* Rod and Bar
B160 Specification for Nickel Rod and Bar
B434 Specification for Nickel-Molybdenum-Chromium-
B161 Specification for Nickel Seamless Pipe and Tube
Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet,
B163 Specification for Seamless Nickel and Nickel Alloy
and Strip
Condenser and Heat-Exchanger Tubes
B435 Specification for UNS N06002, UNS N06230, UNS
B164 Specification for Nickel-Copper Alloy Rod, Bar, and
N12160, and UNS R30556 Plate, Sheet, and Strip
Wire
B444 Specification for Nickel-Chromium-Molybdenum-
B165 Specification for Nickel-Copper Alloy (UNS
Columbium Alloys (UNS N06625 and UNS N06852) and
N04400)* Seamless Pipe and Tube
Nickel-Chromium-Molybdenum-Silicon Alloy (UNS
B166 Specification for Nickel-Chromium-Iron Alloys
N06219) Pipe and Tube
(UNS N06600, N06601, N06603, N06690, N06693,
B445 Specification for Nickel-Chromium-Iron-
N06025, N06045, and N06696)* and Nickel-Chromium-
Columbium-Molybdenum-Tungsten Alloy (UNS
Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and
N06102)* Seamless Pipe and Tube
Wire
B446 Specification for Nickel-Chromium-Molybdenum-
B167 Specification for Nickel-Chromium-Iron Alloys
Columbium Alloy (UNS N06625), Nickel-Chromium-
(UNS N06600, N06601, N06603, N06690, N06693,
Molybdenum-Silicon Alloy (UNS N06219), and Nickel-
N06025, N06045, and N06696)* and Nickel-Chromium-
Chromium-Molybdenum-TungstenAlloy (UNS N06650)*
Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe
Rod and Bar
and Tube
B463 Specification for UNS N08020, UNS N08026, and
UNS N08024 Alloy Plate, Sheet, and Strip
1
This terminology is under the jurisdiction of ASTM Committee B02 on
B471 Specification for UNS NO8020, UNS N08026, and
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee 3
UNS NO8024 Nickel Alloy Spring Wire
B02.91 on Editorial and Terminology.
B473 Specification for UNS N08020, UNS N08024, and
Current edition approved Dec. 1, 2006. Published December 2006. Originally
approved in 1999. Last previous edition approved in 2005 as B899 – 05. DOI: UNS N08026 Nickel Alloy Bar and Wire
10.1520/B0899-06.
B475 Specification for UNS N08020, UNS N08024, and
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
3
the ASTM website. Withdrawn.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B899–06
UNS N08026 Nickel Alloy Round Weaving Wire B709 Specification for Iron-Nickel-Chromium-
B511 Specification for Nickel-Iron-Chromium-Silicon Al- Molybdenum Alloy (UNS N08028)* Plate, Sheet, and
Strip
loy Bars and Shapes
B710 Specification for Nickel-Iron-Chromium-Silicon Al-
B512 Specification for Nickel-Chromium-Silicon Alloy
(UNS N08330) Billets and Bars loy Welded Pipe
B518 Specification for Nickel-Chromium-Iron- B718 Specification for Nickel-Chromium-Molybdenum-
Columbium-Molybdenum-Tungsten Alloy (UNS N06102) Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate,
Sheet, and Strip
Rod
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM B899-21(Terminology)
Standard Terminology Relating to Non-ferrous Metals and Alloys

SIGNIFICANCE AND USE
2.1 The terms defined in this document are generic in respect to the standards under the jurisdiction of Committee B02 on Nonferrous Metals and Alloys. The same terms may have different definitions in other ASTM technical committees.  
2.2 Some definitions may differ within the committee because of limitations on items such as weights or dimensions. In such cases the terms will be more precisely defined in the Terminology section of the standards in which these terms are used.
SCOPE
1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02.  
1.2 To standardize the terminology used in these documents.  
1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.  
1.4 Some definitions include a discussion section, which is a mandatory part of the definition and contains additional information that is relevant to the meaning of the defined term.  
1.5 Definitions of terms specific to a particular standard will appear in that standard and will supersede any definitions of identical terms in this standard.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM B774/B774M-21(Specification)
Standard Specification for Low Melting Point Alloys and Solders

ABSTRACT
This specification covers low-melting point metal alloys and soldiers, including bismuth-tin, bismuth-lead, bismuth-tin-lead, bismuth-tin-lead-cadmium, bismuth-tin-lead-indium-cadmium, bismuth-tin-lead-indium, indium-lead, indium-lead-silver, and indium-tin joining together two or more metals at temperatures below their melting points; blocking for support and removable borders; radiation shielding; fusible plugs; fuses; tube bending; and punch setting. This specification shall include those alloys having liquidus temperature not exceeding the melting point of the tin lead eutectic, and alloys in the form of solid bars, ingots, powder and special forms, and in the form of solid ribbon and wire. The composition of the alloys shall conform to the chemical requirements for bismuth, lead, tin, cadmium, indium, silver, copper, antimony, and zinc. Alloys shall be tested and shall conform to specified values for alloy freezing point, and powder mesh size.
SCOPE
1.1 This specification covers low-melting point metal alloys and solders, including bismuth-tin, bismuth-lead, bismuth-tin-lead, bismuth-tin-lead-cadmium, bismuth-tin-lead-indium-cadmium, bismuth-tin-lead-indium, indium-lead, and indium-lead-silver, and indium-tin joining together two or more metals at temperatures below their melting points; blocking for support and removable borders; radiation shielding; fusible plugs; fuses; tube bending; and punch setting.  
1.1.1 This specification shall include those alloys having a liquidus temperature not exceeding 361 °F [183 °C], the melting point of the tin lead eutectic.  
1.1.2 This specification includes low-melting point alloys in the form of solid bars, ingots, powder and special forms, and in the form of solid ribbon and wire.  
1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM B865-20(Specification)
Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock

ABSTRACT
This specification covers UNS N05500 nickel-copper-aluminum alloy rounds, squares, hexagons, rectangles, and forgings and forging stocks manufactured by either hot working or cold working, and cold-worked wire. The material should conform to the required mechanical properties in both aged and unaged conditions. Precipitation hardening is accomplished by holding the material at a high temperature, followed by furnace cooling and then air cooling.
SCOPE
1.1 This specification covers nickel-copper-aluminum alloy (UNS N05500) in the form of rounds, squares, hexagons, or rectangles, and forgings and forging stock, manufactured either by hot working or cold working, and cold-worked wire.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    6 pages
    English language
    sale 15% off
  • Technical specification
    6 pages
    English language
    sale 15% off
ASTM
ASTM B223-08(2018)(Test Method)
Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

ABSTRACT
This test method covers the determination of the modulus of elasticity of thermostat metals within a particular temperature range. The test is done by mounting the specimen as a cantilever and measuring its deflection when subjected to a mechanical load. Each test specimen should be finished to size by careful machining or filing after being roughly cut, slit, or sheared from the samples. Then the specimen is preformed into a shape approximating the segment of a circle and subsequently heat treated to relieve all internal stresses. To permit maximum sensitivity, any oxide and other foreign substances must be carefully removed from all surfaces of the test specimen which directly affect the electrical resistance of the electronic indicator circuit through the testing apparatus. Extra care should be taken so that the load does not overstress the specimen beyond its elastic limit, if this happens, a new specimen shall be substituted and a lighter load should be used. The modulus of elasticity of each test material is computed using the specimen size and the average deflection for a known load.
SCOPE
1.1 This test method covers the determination of the modulus of elasticity of thermostat metals at any temperature between −300 and +1000°F (−185 and 540°C) by mounting the specimen as a cantilever beam and measuring the deflection when subjected to a mechanical load.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off
ASTM
ASTM B77-07(2018)(Test Method)
Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

SIGNIFICANCE AND USE
4.1 The purpose of this method is to determine the suitability of different metals for use in resistance apparatus in which a low thermoelectric power is desired. As most electric circuits are largely composed of copper, the thermoelectric power of a resistance metal will generally be measured against copper.
SCOPE
1.1 This test method covers the determination of the thermoelectric power of a metal or alloy with respect to copper when the temperatures of the junctions lie between 0 and 100°C.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM B753-07(2018)(Specification)
Standard Specification for Thermostat Component Alloys

ABSTRACT
This specification details the requirements for alloys to be used as components in the manufacture of bonded multi-component thermostat metal strip. It describes alloys having composition, and thermal expansion suitable for application in thermostat metal sheet and strip. The material shall be free of scale, slivers, cracks, seams, corrosion and other defects as best commercial practice will permit. Surfaces shall be uniform and sufficiently clean. Product surface condition can be agreed upon between supplier and purchaser since surface condition can vary for different alloys and because bonding practices vary. The material shall be made of carbon, manganese, silicon, phosphorus, sulfur, chromium, nickel, copper, aluminum, cobalt, and iron. This product shall be supplied in the condition agreed upon by purchaser and seller. Hardness shall be measured on representative samples from each heat treat lot.
SCOPE
1.1 This specification describes requirements for alloys to be used as components in the manufacture of bonded multi-component thermostat metal strip. More specifically it describes alloys having composition, and thermal expansion suitable for application in thermostat metal sheet and strip.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM B936-23(Specification)
Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

ABSTRACT
This specification establishes the requirements for plates, sheets, strips, and rolled bars of copper-chromium-iron-titanium alloys with Copper Alloy UNS No. C18080. The material for manufacture shall be a cast bar, cake, slab or so forth of such purity and soundness as to be suitable for processing by hot working, cold working, and subsequent annealing to produce finished products that have a uniform wrought structure and meet the specified temper properties. Products shall be available in the mill hardened temper (TM). Products shall be sampled and prepared, then tested accordingly to examine their conformance to dimensional (mass, thickness, width, length, straightness, and edge), mechanical (tensile strength and Rockwell hardness), electrical (resistivity and equivalent conductivity), and chemical composition requirements.
SCOPE
1.1 This specification covers the requirements for Copper Alloy UNS No. C18080 for plate, sheet, strip, and rolled bar.
Note 1: Since Copper Alloy UNS No. C18080 is frequently used in a variety of applications where yield strength and stress-corrosion resistance may be critical, it is recommended that drawings or samples of the part to be fabricated and details of application be submitted for use in establishing temper and treatment of material.
Note 2: Copper Alloy UNS No. C18080 is covered by a patent. Interested parties are invited to submit information regarding the identification of an alternative(s) to this patented item to ASTM International headquarters. Your comments will receive careful consideration at a meeting of the responsible technical committee,1 which you may attend.  
1.2 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 The following safety hazard caveat pertains only to the test method(s) described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM B928/B928M-15(2023)e1(Specification)
Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments

ABSTRACT
This specification covers high magnesium marine application aluminum-alloy in those alloy tempers for flat sheet, coiled sheet, and plate, in the mill finish that are intended for marine and similar environments. An inspection lot shall consist of an identifiable quantity of material of the same mill form, alloy, temper, cast or melt lot, and thickness, subjected to inspection at one time. The material shall be supplied in the mill finish and shall be uniform as defined by the requirements of this specification and shall be commercially sound. Each coil, sheet and plate shall be examined to determine conformance to this specification with respect to general quality and identification marking. One sample shall be taken from each end of each parent coil, or parent plate. Alloy-tempers are manufactured and corrosion tested for intended use in marine hull construction or in marine applications where frequent or constant direct contact with seawater is expected. The specimen shall be capable of exhibiting resistance to intergranular corrosion as indicated by an acceptable mass-loss when tested and shall also be capable of exhibiting no evidence of exfoliation or corrosion. Under metallographic examination, the microstructure of a sample from each production lot shall be compared to that of the producer-established reference photomicrograph of acceptable material, in the same thickness range. Each shipping container shall be marked with the purchase order number, material size, specification number, alloy and temper, gross and net weights, and the producer's name or trademark.
SCOPE
1.1 This specification covers high magnesium aluminum-alloy products in the mill finish condition that are intended for marine hull construction and other marine applications where frequent or constant direct contact with seawater is expected and for similar environments (Note 1). Aluminum alloy products covered by this specification include the alloy-tempers of flat sheet, coiled sheet, and plate shown in Table 2 [Table 3] and Table 4 [Table 5], and alloy-tempers of extruded profiles shown in Table 6 [Table 7].
Note 1: There are other aluminum alloy-temper products that may be suitable for use in marine and similar environments, but which may not require the corrosion resistance testing specified by B928/B928M. See Specification B209/B209M for other aluminum sheet and plate alloy-temper products. For other aluminum extruded alloy-temper products see Specification B221 or B221M and/or other relevant specifications for aluminum extruded products.  
1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1 (M). The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A95083 for 5083 in accordance with Practice E527.  
1.3 The values stated in either SI units (Table 3 and Table 5) or inch-pound units (Table 2 and Table 4) are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of each other. Combining values from the two systems may result in non-conformance with the standard.  
1.4 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    15 pages
    English language
    sale 15% off
ASTM
ASTM E527-23(Practice)
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

SIGNIFICANCE AND USE
4.1 The UNS provides a means of correlating many nationally used numbering systems currently administered by societies, trade associations, and individual users and producers of metals and alloys, thereby avoiding confusion caused by use of more than one identification number for the same material; and by the opposite situation of having the same number assigned to two or more entirely different materials. It also provides the uniformity necessary for efficient indexing, record keeping, data storage and retrieval, and cross referencing.  
4.2 A UNS number is not in itself a specification, since it establishes no requirements for form, condition, quality, etc. It is a unified identification of metals and alloys for which controlling limits have been established in specifications published elsewhere.
Note 5: Organizations that issue specifications should report to appropriate UNS number-assigning offices (3.1.2) any specification changes that affect descriptions shown in published UNS listings.
SCOPE
1.1 This practice (Note 1) covers a unified numbering system (UNS) for metals and alloys that have a “commercial standing” (see Note 2), and covers the procedure by which such numbers are assigned. Section 2 describes the system of alphanumeric designations or “numbers” established for each family of metals and alloys. Section 3 outlines the organization established for administering the system. Section 5 describes the procedure for requesting number assignment to metals and alloys for which UNS numbers have not previously been assigned.
Note 1: UNS designations are not to be used for metals and alloys that are not registered under the system described herein, or for any metal or alloy whose composition differs from those registered.
Note 2: The terms “commercial standing,” “production usage,” and other similar terms are intended to apply to metals and alloys in active commercial production and use, although the actual amount of such use will depend, among other things, upon the type of metals and alloys involved and their application.
The various standardizing organizations involved with the individual industries apply their own established criteria to define the status of a metal or alloy in terms of when a UNS designation number will be assigned. For instance, ASTM Committee A01 requires details of heat analysis, mechanical properties, and processing requirements for addition of a new grade or alloy to its specifications. The Copper Development Association requires that the material be “in commercial use (without tonnage limits);” the Aluminum Association requires that the alloy be “offered for sale (not necessarily in commercial use);” the SAE Aerospace Materials Division calls for “repetitive procurement by at least two users.”
Thus, while no universal definition for usage criteria is established, the UNS numbers are intended to identify metals and alloys that are generally in regular production and use. A UNS number will not ordinarily be issued for a material that has just been conceived or that is still in only experimental trial.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM B899-21(Terminology)
Standard Terminology Relating to Non-ferrous Metals and Alloys

SIGNIFICANCE AND USE
2.1 The terms defined in this document are generic in respect to the standards under the jurisdiction of Committee B02 on Nonferrous Metals and Alloys. The same terms may have different definitions in other ASTM technical committees.  
2.2 Some definitions may differ within the committee because of limitations on items such as weights or dimensions. In such cases the terms will be more precisely defined in the Terminology section of the standards in which these terms are used.
SCOPE
1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02.  
1.2 To standardize the terminology used in these documents.  
1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.  
1.4 Some definitions include a discussion section, which is a mandatory part of the definition and contains additional information that is relevant to the meaning of the defined term.  
1.5 Definitions of terms specific to a particular standard will appear in that standard and will supersede any definitions of identical terms in this standard.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off