EN 13303:2003

Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen

This European Standard specifies a method for the determination of the loss in mass of industrial bitumens after heating. The method is used to detect volatile contaminants.

Bitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von Industriebitumen nach Erwärmung

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Masseverlustes von Industriebitumen nach Erwärmung fest. Das Verfahren dient zum Nachweis flüchtiger Verunreinigungen.

Bitumes et liants bitumineux - Détermination de la perte de masse au chauffage des bitumes industriels

La présente Norme européenne prescrit une méthode de détermination de la perte de masse des bitumes industriels après chauffage. On utilise cette méthode pour détecter des composants volatils.
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractères dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva - Določanje izgube mase industrijskih bitumnov po segrevanju

General Information

• Status: Withdrawn
• Publication Date: 01-Apr-2003
• Withdrawal Date: 17-Mar-2009
• ICS: 75.140 - Waxes, bituminous materials and other petroleum products
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 336 - Bituminous binders
• Drafting Committee: CEN/TC 336/WG 5 - Industrial bitumens
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Mar-2009
• Completion Date: 18-Mar-2009
• Ref Project: SIST EN 13303:2003 - Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen

Relations

• Replaced By: EN 13303:2009 - Bitumen and bituminous binders - Determination of the loss in mass after heating of industrial bitumen
• Effective Date: 23-Mar-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13303:2003
01-december-2003
%LWXPHQLQELWXPHQVNDYH]LYD'RORþDQMHL]JXEHPDVHLQGXVWULMVNLKELWXPQRYSR
VHJUHYDQMX
Bitumen and bituminous binders - Determination of the loss in mass after heating of
industrial bitumen
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Masseverlustes von
Industriebitumen nach Erwärmung
Bitumes et liants bitumineux - Détermination de la perte de masse au chauffage des
bitumes industriels
Ta slovenski standard je istoveten z: EN 13303:2003
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 13303:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13303:2003

---------------------- Page: 2 ----------------------

SIST EN 13303:2003
EUROPEAN STANDARD
EN 13303
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2003
ICS 75.140; 91.100.50
English version
Bitumen and bituminous binders - Determination of the loss in
mass after heating of industrial bitumen
Bitumes et liants bitumineux - Détermination de la perte de Bitumen und bitumenhaltige Bindemittel - Bestimmung des
masse au chauffage des bitumes industriels Masseverlustes von Industriebitumen nach Erwärmung
This European Standard was approved by CEN on 17 January 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13303:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13303:2003
EN 13303:2003 (E)
Contents page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Principle.4
5 Apparatus .4
6 Sampling.7
7 Procedure .7
8 Calculation.8
9 Expression of results .8
10 Precision.8
10.1 Repeatability.8
10.2 Reproducibility.8
11 Test report .9
Annex A (normative) Specifications of thermometer .10
2

---------------------- Page: 4 ----------------------

SIST EN 13303:2003
EN 13303:2003 (E)
Foreword
This document (EN 13303:200) has been prepared by Technical Committee CEN /TC 336 "Bituminous binders",
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latest
by October 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
Annex A is normative.
3

---------------------- Page: 5 ----------------------

SIST EN 13303:2003
EN 13303:2003 (E)
1 Scope
This European Standard specifies a method for the determination of the loss in mass of industrial bitumen after
heating. The method is used to detect volatile components.
WARNING — The use of this standard may involve hazardous materials, operations and equipment. This
standard does not purport to address all of the safety problems associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and to
determine the applicability of regulatory limitations prior to use.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 58, Sampling bituminous binders.
EN 1426, Bitumen and bituminous binders - Determination of needle penetration.
EN 12594, Bitumen and bituminous binders - Preparation of test samples.
3 Terms and definitions
For the purposes of this European Standard, the following terms and definitions apply.
3.1
loss on heating
r
...