EN 13480-4:2017/A1:2023

Metallic industrial piping - Part 4: Fabrication and installation

This Part of this European Standard specifies the requirements for fabrication and installation of piping systems, including supports, designed in accordance with EN 13480-3:2017.

Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung

No scope available

Tuyauteries industrielles métalliques - Partie 4 : Fabrication et installation

Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A1

General Information

• Status: Published
• Publication Date: 28-Nov-2023
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 4 - Manufacturing and installation
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 29-Nov-2023
• Due Date: 16-Oct-2020
• Completion Date: 29-Nov-2023
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-4:2018/A1:2024 - Metallic industrial piping - Part 4: Fabrication and installation

Relations

• Amends: EN 13480-4:2017 - Metallic industrial piping - Part 4: Fabrication and installation
• Effective Date: 02-May-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-4:2018/A1:2024
01-februar-2024
Kovinski industrijski cevovodi - 4. del: Proizvodnja in vgradnja - Dopolnilo A1
Metallic industrial piping - Part 4: Fabrication and installation
Metallische industrielle Rohrleitungen - Teil 4: Fertigung und Verlegung
Tuyauteries industrielles métalliques - Partie 4 : Fabrication et installation
Ta slovenski standard je istoveten z: EN 13480-4:2017/A1:2023
ICS:
23.040.10 Železne in jeklene cevi Iron and steel pipes
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
SIST EN 13480-4:2018/A1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13480-4:2018/A1:2024

---------------------- Page: 2 ----------------------
SIST EN 13480-4:2018/A1:2024


EN 13480-4:2017/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 23.040.01
English Version

Metallic industrial piping - Part 4: Fabrication and
installation
Tuyauteries industrielles métalliques - Partie 4 : Metallische industrielle Rohrleitungen - Teil 4:
Fabrication et installation Fertigung und Verlegung
This amendment A1 modifies the European Standard EN 13480-4:2017; it was approved by CEN on 28 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-4:2017/A1:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13480-4:2018/A1:2024
EN 13480-4:2017/A1:2023 (E)
Contents Page
European foreword . 3
1 Modifications to Clause 2, "Normative references" . 4
2 Modification to 8.3.1, "Flange connections" . 4
3 Modification to 9.1, "Welding personnel" . 4
4 Modification to 9.3.1, "Verification of suitability" . 5
5 Modification to 9.14.7, "Insulation" . 5
6 Modification to 11.2.2, "CE Marking of installed piping" . 5
7 Modification to Annex ZA (informative), "Relationship between this European
Standard and the essential requirements of EU Directive 2014/68/EU aimed to be
covered" . 5
8 Modifications to the Bibliography . 6



2

---------------------- Page: 4 ----------------------
SIST EN 13480-4:2018/A1:2024
EN 13480-4:2017/A1:2023 (E)
European foreword
This document (EN 13480-4:2017/A1:2023) has been prepared by Technical Committee CEN/TC 267
“Industrial piping and pipelines”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024 and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility th
...