prEN ISO 10426-5

Oil and gas industries including lower carbon energy - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations (ISO/DIS 10426-5:2023)

ISO 10426-5:2004 provides the methods for the testing of well cement formulations to determine the dimension changes during the curing process (cement hydration) at atmospheric pressure only. This is a base document, because under real well cementing conditions shrinkage and expansion take place under pressure and different boundary conditions.

Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Zemente und Materialien für die Zementation von Tiefbohrungen - Teil 5: Bestimmung der Schrumpfung und Quellung von Bohrloch-Zementmischungen bei atmosphärischem Druck (ISO/DIS 10426-5:2023)

Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone - Ciments et matériaux pour la cimentation des puits - Partie 5: Détermination du retrait et de l'expansion des formulations de ciments pour puits (ISO/DIS 10426-5:2023)

L'ISO 10426-5:2004 fournit les méthodes d'essai des formulations de ciments pour puits afin de déterminer les variations de dimensions au cours du processus de vieillissement (hydratation du ciment), à la pression atmosphérique uniquement. Il s'agit d'un document de base, car, dans les conditions réelles de cimentation des puits, le retrait et l'expansion se produisent sous pression et dans des conditions d'environnement différentes.

Naftna in plinska industrija, vključno z nizkoogljično energijo - Cementi in materiali za cementiranje vrtin - 5. del: Določevanje krčenja in širjenja cementnih mešanic za vrtine (ISO/DIS 10426-5:2023)

General Information

• Status: Not Published
• Publication Date: 16-Apr-2025
• ICS: 75.020 - Extraction and processing of petroleum and natural gas
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 14-Dec-2023
• Completion Date: 14-Dec-2023
• Ref Project: oSIST prEN ISO 10426-5:2023 - Oil and gas industries including lower carbon energy - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations (ISO/DIS 10426-5:2023)

Relations

• Revises: EN ISO 10426-5:2005 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004)
• Effective Date: 26-Jul-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 10426-5:2023
01-december-2023
Naftna in plinska industrija, vključno z nizkoogljično energijo - Cementi in materiali
za cementiranje vrtin - 5. del: Določevanje krčenja in širjenja cementnih mešanic
za vrtine (ISO/DIS 10426-5:2023)
Oil and gas industries including lower carbon energy - Cements and materials for well
cementing - Part 5: Determination of shrinkage and expansion of well cement
formulations (ISO/DIS 10426-5:2023)
Öl- und Gasindustrie einschließlich kohlenstoffarmer Energieträger - Zemente und
Materialien für die Zementation von Tiefbohrungen - Teil 5: Bestimmung der
Schrumpfung und Quellung von Bohrloch-Zementmischungen bei atmosphärischem
Druck (ISO/DIS 10426-5:2023)
Industries du pétrole et du gaz, y compris les énergies à faible teneur en carbone -
Ciments et matériaux pour la cimentation des puits - Partie 5: Détermination du retrait et
de l'expansion des formulations de ciments pour puits (ISO/DIS 10426-5:2023)
Ta slovenski standard je istoveten z: prEN ISO 10426-5
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
oSIST prEN ISO 10426-5:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10426-5:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10426-5:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10426-5
ISO/TC 67/SC 3 Secretariat: UNI
Voting begins on: Voting terminates on:
2023-09-21 2023-12-14
Oil and gas industries including lower carbon energy —
Cements and materials for well cementing —
Part 5:
Determination of shrinkage and expansion of well cement
formulations
ICS: 75.020; 91.100.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10426-5:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10426-5:2023
ISO/DIS 10426-5:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10426-5
ISO/TC 67/SC 3 Secretariat: UNI
Voting begins on: Voting terminates on:

Oil and gas industries including lower carbon energy —
Cements and materials for well cementing —
Part 5:
Determination of shrinkage and expansion of well cement
formulations
ICS: 75.020; 91.100.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 10426-5:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10426-5:2023
ISO/DIS 10426-5:2023(E)
Contents Page
Foreword .iv
In
...