prEN ISO 17249
(Main)Safety footwear for users of handheld chain saws (ISO/DIS 17249:2024)
Safety footwear for users of handheld chain saws (ISO/DIS 17249:2024)
This International Standard specifies requirements for safety footwear for users of handheld chain saws. It also specifies requirements for footwear for users of handheld chain saws equipped with customized insocks, customized footwear with resistance to chain saw cutting or individual manufactured customized footwear with resistance to chain saw cutting.
Special risks are covered by complementary job-related standards (e.g. electrically insulating footwear, protection against molten metal splash)
Sicherheitsschuhe für die Benutzer von handgeführten Kettensägen (ISO/DIS 17249:2024)
Chaussures de sécurité pour utilisateurs de scies à chaîne tenues à la main (ISO/DIS 17249:2024)
Varovalna obutev odporna proti urezu z verižno žago (ISO/DIS 17249:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Varovalna obutev odporna proti urezu z verižno žago (ISO/DIS 17249:2024)
Safety footwear for users of handheld chain saws (ISO/DIS 17249:2024)
Sicherheitsschuhe für die Benutzer von handgeführten Kettensägen (ISO/DIS
17249:2024)
Chaussures de sécurité pour utilisateurs de scies à chaîne tenues à la main (ISO/DIS
17249:2024)
Ta slovenski standard je istoveten z: prEN ISO 17249
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 17249
ISO/TC 94/SC 3
Safety footwear for users of
Secretariat: BSI
handheld chain saws
Voting begins on:
ICS: 13.340.50
2024-08-20
Voting terminates on:
2024-11-12
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 17249:2024(en)
DRAFT
ISO/DIS 17249:2024(en)
International
Standard
ISO/DIS 17249
ISO/TC 94/SC 3
Safety footwear for users of
Secretariat: BSI
handheld chain saws
Voting begins on:
ICS: 13.340.50
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 17249:2024(en)
ii
ISO/DIS 17249:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General testing parameters . 2
5 Classification . 2
6 Requirements . 3
6.1 General .3
6.2 Design .6
6.3 Construction .6
6.4 Resistance to chain saw cutting .8
7 Marking . . 8
8 Manufacturer’s instructions and information . 9
8.1 General .9
8.2 Additional warning .9
Annex A (informative) Assessment of the footwear by the wearer .11
Annex B (normative) Deviation to the test methods of ISO 11393-3:2018 .13
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of PPE Regulation (EU) 2016/425 aimed to be covered . 14
Bibliography .16
iii
ISO/DIS 17249:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO [had/had not] received notice of
(a) patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 94, Personal safety — Protective clothing and
equipment, Subcommittee SC 3, Foot protection.
This third edition cancels and replaces the second edition (ISO 17249:2013) which has been technically
revised.
The main changes are as follows:
— The scope was revised;
— The term “mudguard” and a corresponding Figure were added (3.2 and Figure 2);
— The general testing parameters were revised (Clause 4);
— A reference on customized insocks was added in 6.1;
— Hybrid footwear was added (Table 1 and 2);
— The requirements on slip resistance were clarified (Table 2);
— Seam strength was added (Table 2);
— Perforation resistance was revised (Tabel 2);
— Electrically insulating footwear according to EN 50321 was deleted (Table 2);
— Water vapour permeation was deleted (Table 2);
— Reference insole/insock/seat sock/footbeds testing was revised (Table 2);
— The requirement for cut resistance “CR” was added (Table 2);
— An optional requirement for scuff caps “SC” was added (Table 2);
— The optional requirement Ladder grip “LG” was added (Table 2);
iv
ISO/DIS 17249:2024(en)
— 6.2 Design was revised;
— Table 3 Minimum height of the protective area was revised;
— 6.3 Construction was revised;
— Figure 3 Minimum protective area was revised;
— 6.4 Resistance to chain saw cutting was revised;
— Clause 7 Marking was revised;
— Clause 8 Manufacturer’s instructions and information was revised;
— Sub-clauses 8.3 to 8.5 were deleted;
— Annex A Assessment of the footwear by the wearer including the Figures has been revised;
— Annex B Deviation to the test methods of ISO 11393 3:2018 was added.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
DRAFT International Standard ISO/DIS 17249:2024(en)
Safety footwear for users of handheld chain saws
1 Scope
This document specifies requirements for safety footwear for users of handheld chain saws. It also specifies
requirements for footwear for users of handheld chain saws equipped with customized insocks.
Special risks are covered by complementary job-related standards (e.g. electrically insulating footwear,
protection against molten metal splash).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes
requirements of this document. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
I S O 203 4 4:2021+A 1: 2024, Personal protective equipment — Test methods for footwear
ISO 20345:2021+A1: 2024, Personal protective equipment — Safety footwear
ISO 11393-2:2018, Protective clothing for users of hand-held chainsaws — Part 2: Performance requirements
and test methods for leg protectors
ISO 11393-3:2018, Protective clothing for users of hand-held chainsaws — Part 3: Test methods for footwear
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 20345:2021+A1: 2024 and the
following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
3.1
feather line
line around the inside of the footwear where the foot enclosure turns from vertical to horizontal
Note 1 to entry: This is not ordinarily the same as the insole edge or sole edge. See Figure 1.
ISO/DIS 17249:2024(en)
Key
1 upper
2 feather line
3 insole
4 outsole
5 Strobel stitching
Figure 1 — Position of the feather line
3.2
mudguard
strip of material incorporated or connected to the feather line of the sole, considered part of it, for granting
better protection against debris, mud and water
Note 1 to entry: See also ISO 20344:2021+A1: 2024, Figure 2 Type e)
Key
1 mudguard
2 sole
Figure 2 — Mudguard
4 General testing parameters
The requirements of ISO 20344:2021+A1: 2024, Clause 4 shall apply.
5 Classification
Safety footwear for users of handheld chain saws shall be classified in accordance with Table 1.
ISO/DIS 17249:2024(en)
Table
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.