EN 3475-514:2014

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands

This European Standard specifies an assessment method of the copper porosity on copper clad aluminium strands with or without external coating or on Nickel or silver copper clad aluminium conductors.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 514: Porosität von Einzeldrähten aus Aluminium mit einer Kupferauflage

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d’essais - Partie 514: Porosité d’un revêtement cuivre sur des brins aluminium

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 514. del: Poroznost bakrene obloge na aluminijevih žicah

EN 3475-514 določa preskusno metodo za poroznost bakrene obloge na aluminijevih žicah z ali brez zunanje prevleke ali poroznost bakrene obloge na nikljevih ali srebrnih žicah na aluminijevih vodnikih. Uporabljal naj bi se s standardom EN 3475-100.

General Information

• Status: Published
• Publication Date: 29-Apr-2014
• Withdrawal Date: 30-Oct-2014
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 30-Apr-2014
• Completion Date: 30-Apr-2014
• Ref Project: SIST EN 3475-514:2014 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands

Relations

• Replaces: EN 3475-514:2007 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
• Effective Date: 07-May-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 514: Porosität von Einzeldrähten aus Aluminium mit einer KupferauflageSérie aérospatiale - Câbles électriques à usage aéronautique - Méthodes d’essais - Partie 514: Porosité d’un revêtement cuivre sur des brins aluminiumAerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands49.060Aerospace electric equipment and systems49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 3475-514:2014SIST EN 3475-514:2014en,fr,de01-julij-2014SIST EN 3475-514:2014SLOVENSKI
STANDARDSIST EN 3475-514:20071DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3475-514
April 2014 ICS 49.060 Supersedes EN 3475-514:2007English Version
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 514: Porosity of copper cladding on aluminium strands
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 514: Porosité d'un revêtement cuivre sur des brins aluminium
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 514: Porosität von Einzeldrähten aus Aluminium mit einer Kupferauflage This European Standard was approved by CEN on 12 October 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3475-514:2014 ESIST EN 3475-514:2014
...