EN 12317-2:2010

Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

This European Standard specifies a method for determining the resistance to shearing of joints between two adjacent sheets of the same plastic or rubber sheets for roof waterproofing.
NOTE   The shearing characteristics of a joint between two widths of plastic or rubber sheets vary considerably depending on the material, method of jointing, the size of the overlap and the workmanship.

Abdichtungsbahnen - Bestimmung des Scherwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen

Diese Europäische Norm legt ein Verfahren zur Bestimmung des Scherwiderstands der Fügenähte zwischen zwei benachbarten Dachabdichtungsbahnen fest, die aus dem gleichen Kunststoff oder Elastomer bestehen.
ANMERKUNG   Die Scherkennwerte einer Fügenaht zwischen zwei Kunststoff  oder Elastomerbahnen unterscheiden sich merklich in Abhängigkeit von Werkstoff, Fügeverfahren, Größe der Überlappung und Art der Arbeitsausführung.

Feuilles souples d'étanchéité - Détermination de la résistance au cisaillement des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères

La présente Norme européenne décrit une méthode pour la détermination de la résistance au cisaillement des joints formés entre deux feuilles attenantes, constituées du même type de feuilles plastiques ou élastomères pour l'étanchéité de toiture.
NOTE   Les caractéristiques de cisaillement d’un joint entre deux feuilles plastiques ou élastomères varient de manière considérable selon le matériau, la méthode de jonction utilisée, les dimensions du recouvrement et la main d'oeuvre.

Hidroizolacijski trakovi - Določevanje strižne trdnosti spojev - 2. del: Polimerni in elastomerni trakovi za tesnjenje streh

Ta evropski standard določa metodo za določevanje odpornosti proti rezanju spojev med dvema sosednjima trakovoma enakih polimernih ali elastomernih trakov za tesnjenje streh.

General Information

• Status: Published
• Publication Date: 06-Jul-2010
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/SC 2 - Synthetic sheets
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 11-May-2021
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN 12317-2:2010 - Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing

Relations

• Replaces: EN 12317-2:2000 - Flexible sheets for waterproofing - Determination of the shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Abdichtungsbahnen - Bestimmung des Scherwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für DachabdichtungenFeuilles souples d'étanchéité - Détermination de la résistance au cisaillement des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomèresFlexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 12317-2:2010SIST EN 12317-2:2010en,fr,de01-oktober-2010SIST EN 12317-2:2010SLOVENSKI
STANDARDSIST EN 12317-2:20011DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12317-2
July 2010 ICS 91.100.50 English Version
Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
Feuilles souples d'étanchéité - Détermination de la résistance au cisaillement des joints - Partie 2: Feuilles d'étanchéité de toiture plastiques et élastomères
Abdichtungsbahnen - Bestimmung des Scherwiderstandes der Fügenähte - Teil 2: Kunststoff- und Elastomerbahnen für Dachabdichtungen This European Standard was approved by CEN on 29 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12317-2:2010: ESIST EN 12317-2:2010

Failure modes .9 SIST EN 12317-2:2010
...