EN 2714-009:2007

Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard

This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °° and 260 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing.
These markings shall be in accordance with EN 3838.

Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 009: Geschirmt (Umseilung) und ummantelt, YAG X3 Laser bedruckbar - Produktnorm

Diese Norm legt die Eigenschaften von YAG X3 Laser bedruckbaren, ein  und mehradrigen, geschirmten (Umseilung) und ummantelten elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luftfahr¬zeugen bei Betriebstemperaturen zwischen - 55 °C und 260 °C bestimmt sind.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung oder Tintenstrahl zu kennzeichnen.
Diese Kennzeichnungen müssen EN 3838 entsprechen.

Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Blindés (guipés) et gainés, marquable au laser YAG X3 - Norme de produit

Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 260 °C - 009. del: Oklopljeni (spirala) in oplaščeni, z možnostjo laserskega tiskanja YAG X3 - Standard za proizvod

General Information

• Status: Published
• Publication Date: 13-Nov-2007
• Withdrawal Date: 30-May-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 2714-009:2009 - Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 009: Geschirmt (Umseilung) und ummantelt, YAG X3 Laser bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Blindés (guipés) et gainés, marquable au laser YAG X3 - Norme de produitAerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2714-009:2007SIST EN 2714-009:2009en,de01-junij-2009SIST EN 2714-009:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2714-009
November 2007 ICS 49.060 English Version
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 260 °C - Partie 009 : Blindés (guipés) et gainés, marquable au laser YAG X3 - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 260 °C - Teil 009: Geschirmt (Umseilung) und ummantelt,YAG X3 Laser bedruckbar - Produktnorm This European Standard was approved by CEN on 27 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2714-009:2007: ESIST EN 2714-009:2009
...