prEN 14528
(Main)Bidets - Functional requirements and test methods
Bidets - Functional requirements and test methods
This European Standard specifies the functional requirements and test methods for bidets used for domestic purposes and made from either ceramics or stainless steel.
All drawings are examples only, other forms are permissible.
NOTE For the purposes of this standard the term ‘domestic purposes‘ includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
Sitzwaschbecken - Funktionsanforderungen und Prüfverfahren
Dieses Dokument legt die wesentlichen Merkmale und Prüfverfahren zur Feststellung der Leistungsbestän digkeit von Bidets für den häuslichen Gebrauch fest, die für die persönliche Hygiene verwendet werden und entweder aus Keramik oder aus nichtrostendem Stahl bestehen.
Häusliche Zwecke schließen die Verwendung in Hotels, Studentenwohnheimen, Krankenhäusern und ähnli
chen Gebäuden ein, es sei denn, es sind besondere medizinische Vorkehrungen erforderlich.
Die ordnungsgemäße Funktion von Bidets kann nur dann vorausgesetzt werden, wenn sie an ein geeignetes Abflusssystem angeschlossen sind (siehe EN12056-2:2001 für weitere Informationen). Alle Zeichnungen sind nur Beispiele.
Bidets - Exigences fonctionnelles et méthodes d'essai
Le présent document spécifie les caractéristiques essentielles et les méthodes d’essai permettant d’établir la constance des performances des bidets à usage domestique, en céramique ou en acier inoxydable et destinés à être utilisés pour l’hygiène personnelle.
L’expression « à usage domestique » inclut l’utilisation en hôtels, en logements pour étudiants, en hôpitaux et autres bâtiments similaires, sauf si des précautions médicales particulières s’imposent.
Le bon fonctionnement des bidets ne peut être assuré que s'ils sont raccordés à un réseau d'évacuation approprié (voir l’EN 12056-2:2001 pour plus d’informations). Toutes les figures ne sont que des exemples.
Bideji - Funkcionalne zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14528:2023
01-februar-2023
Bideji - Funkcionalne zahteve in preskusne metode
Bidets - Functional requirements and test methods
Sitzwaschbecken - Funktionsanforderungen und Prüfverfahren
Bidets - Exigences fonctionnelles et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 14528
ICS:
91.140.70 Sanitarne naprave Sanitary installations
oSIST prEN 14528:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14528:2023
---------------------- Page: 2 ----------------------
oSIST prEN 14528:2023
DRAFT
EUROPEAN STANDARD
prEN 14528
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2022
ICS 91.140.70 Will supersede EN 14528:2015+A1:2018
English Version
Bidets - Functional requirements and test methods
Bidets - Exigences fonctionnelles et méthodes d'essai Sitzwaschbecken - Funktionsanforderungen und
Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 163.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14528:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14528:2023
prEN 14528:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and abbreviations . 4
3.1 Terms and definitions . 4
3.2 Abbreviations . 5
4 Characteristics . 5
4.1 Cleanability . 5
4.2 Load resistance . 5
4.3 Capacity to overflow . 5
5 Testing, assessment and sampling methods . 6
5.1 General. 6
5.2 Determination of cleanability . 6
5.3 Determination of load resistance . 7
5.4 Determination of capacity to overflow . 8
6 Assessment and verification of constancy of performance – AVCP . 8
6.1 General. 8
6.2 Assessment of performance . 9
6.2.1 General. 9
6.2.2 Test samples, testing and assessment criteria . 9
6.3 Verification of constancy of performance . 10
6.3.1 Factory production control (FPC) . 10
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No. 305/2011 . 12
Bibliography . 14
2
---------------------- Page: 4 ----------------------
oSIST prEN 14528:2023
prEN 14528:2022 (E)
European foreword
This document (prEN 14528:2022) has been prepared by Technical Committee CEN/TC 163 “Sanitary
appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14528:2015+A1:2018.
In comparison with the previous edition, the following technical modifications have been made:
a) modifications of the scope for a better understanding;
b) modification and supplementation of chapter normative references;
c) supplementation of chapter terms and definitions by means of five abbreviations and one definition;
d) complete redrafting of chapter “Characteristics” according the necessity of 305/2011 (EU);
e) completely redrafting of chapter “Testing, assessment and sampling methods” to be in line with
chapter “Characteristics”;
f) modification of chapter 6 to Annex ZA according the necessity of 305/2011 (EU).
This document has been prepared under a standardization request to CEN by the European Commission
and the European Free Trade Association.
For relationship with EU Construction Products Regulation, see informative Annex ZA, which is an
integral part of this document.
3
---------------------- Page: 5 ----------------------
oSIST prEN 14528:2023
prEN 14528:2022 (E)
1 Scope
This document specifies essential characteristics and test methods for establishing constancy of
performance for bidets used for domestic purpose to be used for personal hygiene and made from either
ceramics or stainless steel.
Domestic purposes include use in hotels, accommodation for students, hospitals and similar buildings,
except when special medical provisions are required.
Proper functioning of bidets can only be assumed when connected to a suitable drainage system (see
EN 12056-2:2001 for more information). All drawings are examples only.
2 Normative references
There are no normative references in this document.
3 Terms, definitions and abbreviations
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at https://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp
3.1.1
bidet
sanitary appliance for washing the genital area whilst seated
Note 1 to entry: See Figure 1 and Figure 2.
Figure 1 — Wall-hung bidet
Figure 2 — Pedestal bidet
4
---------------------- Page: 6 ----------------------
oSIST prEN 14528:2023
prEN 14528:2022 (E)
3.1.2
functional surfaces
areas of the bidet intended to or likely to come into contact with water during use
Note 1 to entry: Parts of the bidet with special function(s) are deemed to be excluded. Examples for areas with
special functions are inlet and outlet holes, outlet grills and overflow protection provisions
3.1.3
cleanability
characteristic which allows the functional surfaces to be self-draining, visibly smooth, non-absorbent and
free from unacceptable internal corners, such that they can be kept visibly free from dirt and/or stains
after use when subject to a regular maintenance regime
Note 1 to entry: This may include, when appropriate, specific instructions for use and care, as specified by the
manufacturer
3.2 Abbreviations
The following abbreviations can be used for marking (e.g. CE marking), independent of the language
version of this document and the language of the market where the product will be placed.
CA Cleanability
CL Capacity to overflow
LR Load resistance
PH Personal hygiene
4 Characteristics
4.1 Cleanability
The functional surfaces of the bidet shall be tested in accordance with 5.2.
When tested in accordance with 5.2, bidets shall have smooth and readily cleansed non-absorbent
functional surfaces which are free from acute internal corners which would be difficult to clean, i.e.
surfaces intended to or likely to come into contact with water during use. Water inside the bowl of the
bidet shall drain out through the plug hole.
The stagnation of water due to surface tension is permitted.
The results can be expressed as follows:
• Both of the above requirements are met CA
4.2 Load resistance
When tested in accordance with 5.3., wall-hung bidets shall withstand a force of (4,00 ± 0,1) kN without
showing any evidence of cracking and/or permanent deformation.
The results can be expressed as follows:
• LR 4
4.3 Capacity to overflow
Bidets shall be tested in accordance with 5.4. in order to determinate the capacity of the overflow.
5
---------------------- Page: 7 ----------------------
oSIST prEN 14528:2023
prEN 14528:2022 (E)
The performance shall be expressed by means of an overflow type dependent on the flow rate of the
overflow. The type of overflow corresponds to the capacity of the overflow given in Table 1. When tested
in accordance with 5.4, the flow rate of the overflow shall not be less than the values given in Table 1.
The results can be expressed in accordance with Table 1 “capacity level”:
• e.g: CL 25
The overflow can be either an integral overflow or an overflow device as specified by the manufacturer.
Table 1 — Flow rates of the overflow
overflow rates
Capacity Level
l/s
0,25 CL 25
0,20 CL 20
0,15 CL 15
0 CL 00
Products without an overflow shall be classified with CL 00.
5 Testing, assessment and sampling methods
5.1 General
All tests shall be carried out on the same sample bidet.
Install the bidet to be tested on a firm flat horizontal or vertical surface as appropriate with a layer of
mortar or other material to accommodate any unevenness in accordance with the manufacturer's
installation instructions.
5.2 Determination of cleanability
Test equipment:
• Water coloured with eosin or any other colouring agent
The concentration is about 0,1 g of eosin plus 0,1 g of standard (liquid) detergent per litre of water
(a different concentration and/or a different colouring agent may be used, depending on the colour
of the appliance, since the goal is to ensure a visual contrast with the appliance).
• Steel ball
Use a steel ball (⌀ (15 ± 0,5) mm, and in narrow areas of the bidet a ⌀ (11 ± 0,5) mm ball may be
used).
Test procedure:
• The bidet shall be made level on the mounting surface and in accordance with the manufacturer's
instructions. Clean the sample with a cleaning product recommended by the manufacturer or a
standard gentle detergent and a non-abrasive natural sponge. The purpose of this operation is to
remove all residues from the appliance (demoulding agent, grease, dust,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.