EN 3475-414:2005
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
This standard specifies a method of measuring the level of sintering of a PTFE tape on a finished cable.
It shall be used together with EN 3475-100 and ASTM-D-4591-01.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 414: DSC Verfahren
Diese Norm legt ein Verfahren zur Bestimmung des Sintergrades eines PTFE-Bandes auf einer fertigen Leitung fest.
Sie ist in Verbindung mit EN 3475-100 und ASTM-D-4591-01 anzuwenden.
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 414 : Essai DSC
Aeronavtika – Električni kabli za uporabo v zračnih plovilih – Preskusne metode – 414. del: Diferenčni dinamični kalorimeter (preskus DSC)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 414 : Essai DSCLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 414: DSC VerfahrenTa slovenski standard je istoveten z:EN 3475-414:2005SIST EN 3475-414:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3475-414:200601-julij-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-414October 2005ICS 49.060 English VersionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 414: Differential scanning calorimeter (DSC test)Série aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 414 : Essai DSCLuft- und Raumfahrt - Elektrische Leitungen fürLuftfahrtverwendung - Prüfverfahren - Teil 414: DSCVerfahrenThis European Standard was approved by CEN on 12 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-414:2005: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.