iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 4830-001:2015

(Main)

Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 001: Technical specification

Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 001: Technical specification

This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for EN 4165 rectangular connectors with removable optical modules using EN 4639-10X contacts.

Luft- und Raumfahrt - Optischer Rechtecksteckverbinder, modular, Betriebstemperatur 125 °C, für EN 4639-10X Kontakte - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Connecteurs optiques rectangulaires, modulaires, température d'utilisation 125 °C, pour contacts EN 4639-10X - Partie 001: Spécification technique

Aeronavtika - Konektorji, optični, pravokotni, modularni, za delovno temperaturo 125 °C, za kontakte po EN 4639-10X - 001. del: Tehnična specifikacija

Ta evropski standard določa splošne značilnosti, pogoje kvalifikacije, sprejemljivosti in zagotavljanja kakovosti ter preskusne programe in skupine za pravokotne konektorje iz standarda EN 4165 z odstranljivimi optičnimi moduli, ki uporabljajo kontakte iz standarda EN 4639-10X.

General Information

Status
Published
Publication Date
08-Dec-2015
Withdrawal Date
29-Jun-2016
ICS
49.090 - On-board equipment and instruments
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2 - Electrical
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
09-Dec-2015
Completion Date
09-Dec-2015
Ref Project
SIST EN 4830-001:2016 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 001: Technical specification

Buy Standard

EN 4830-001:2016EN 4830-001:2016
PreviousNext
Standard
EN 4830-001:2016
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FLMDLuft- und Raumfahrt - Optischer Rechtecksteckverbinder, modular, Betriebstemperatur 125 °C, für EN 4639-10X Kontakte - Teil 001: Technische LieferbedingungenSérie aérospatiale - Connecteurs optiques rectangulaires, modulaires, température d'utilisation 125 °C, pour contacts EN 4639-10X - Partie 001: Spécification techniqueAerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4639-10X contacts - Part 001: Technical specification49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4830-001:2015SIST EN 4830-001:2016en,fr,de01-februar-2016SIST EN 4830-001:2016SLOVENSKI
STANDARD



SIST EN 4830-001:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4830-001
December
t r s w ICS
v {ä r { r English Version
Aerospace series æ Connectorsá opticalá rectangulará modulará operating temperature
s t w
¹Cá for EN
v x u {æ s rX contacts æ Part
r r sã Technical specification Série aérospatiale æ Connecteurs optiques rectangulairesá modulairesá température d 5utilisation
s t w
¹Cá pour contacts EN
v x u {æ s rX æ Partie
r r sã Spécification technique
Luftæ und Raumfahrt æ Optischer Rechtecksteckverbinderá modulará Betriebstemperatur
s t w
¹Cá für EN
v x u {æ s rX Kontakte æ Teil
r r sã Technische Lieferbedingungen This European Standard was approved by CEN on
t t August
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v z u ræ r r sã t r s w ESIST EN 4830-001:2016



EN 4830-001:2015 (E) 2 Contents
Page European foreword . 3 Introduction . 4 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Description . 5 5 Design . 6 6 Definition drawings. 8 7 Tests . 14 8 Quality assurance . 18 9 Designation and marking . 25
SIST EN 4830-001:2016



EN 4830-001:2015 (E) 3 European foreword This document (EN 4830-001:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations an
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 3375-009:2023(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard
SIST EN 3375-009:2023

This document specifies the required characteristics of single braid, 120 ohms, size 26, electrical cable type WX, UV laser markable, intended for digital data transmissions.
It is used together with EN 3375 001.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-509:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts
SIST EN 2591-509:2023

This document specifies methods of verifying adhesion of electrodeposited gold and gold alloy coatings on contacts.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2591-508:2023(Main)
Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts
SIST EN 2591-508:2023

This document specifies methods of measuring thickness of electro-deposited gold or gold alloys coatings on contacts of elements of connection.

  • Standard
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-011:2022(Main)
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
SIST EN 3375-011:2023

This document specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between −65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The impedance is 100 Ω ± 15 Ω.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3375-001:2022(Main)
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
SIST EN 3375-001:2022

This document specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-412:2022(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
SIST EN 3745-412:2022

This document evaluates the resistance of the fiber optic cable to humidity changes at different
temperatures.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4641-301:2022(Main)
Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
SIST EN 4641-301:2022

This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 50/125 μm Graded Index fibre core, 1,8 mm outside diameter for non pull-proof contact designs.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4533-001:2020(Main)
Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools
SIST EN 4533-001:2020

1.1   General
Part 001 of EN 4533 examines the termination of optical fibre cables used in aerospace applications. Termination is the act of installing an optical terminus onto the end of a buffered fibre or fibre optic cable. It encompasses several sequential procedures or practices. Although termini will have specific termination procedures, many share common elements and these are discussed in this document. Termination is required to form an optical link between any two network or system components or to join fibre optic links together.
The fibre optic terminus features a precision ferrule with a tight tolerance central bore hole to accommodate the optical fibre (suitably bonded in place and highly polished). Accurate alignment with another (mating) terminus will be provided within the interconnect (or connector) alignment mechanism. As well as single fibre ferrules, it is noted that multi-fibre ferrules exist (e.g. the MT ferrule) and these will also be discussed in this part of the handbook.
Another technology used to connect 2 fibres is the expanded beam. 2 ball lenses are used to expand, collimate and then refocus the light from and to fibres. Contacts are not mated together. It helps reducing the wear between 2 contacts and allows more mating cycles. This technology is less sensitive to misalignments and dust. Losses are remaining more stable than butt joint contact even if the nominal loss is higher.
A Note on Terminology
Current terminology in the aerospace fibre optics community refers to an optical terminus or termini. The term optical contact may be seen in some documents and has a similar meaning. However, the term contact is now generally reserved for electrical interconnection pins. The optical terminus (or termini) is housed within an interconnect (connector is an equivalent term). Interconnects can be single-way or multi-way. The interconnect or connector will generally house the alignment mechanism for the optical termini (usually a precision split-C sleeve made of ceramic or metal). The reader should be aware of these different terms.
An optical link can be classified as a length of fibre optic cable terminated at both ends with fibre optic termini. The optical link provides the transmission line between any two components via the optical termini which are typically housed within an interconnecting device (typically a connector) with tight tolerancing within the alignment mechanisms to ensure a low loss light transmission.
Part 001 will explain the need for high integrity terminations, provide an insight into component selection issues and suggests best practice when terminating fibres into termini for high integrity applications. A detailed review of the termination process can be found in section 4 of this part and is organised in line with the sequence of a typical termination procedure.
The vast number of cable constructions and connectors available make defining a single termination instruction that is applicable to all combinations very difficult. Therefore, this handbook concentrates on the common features of most termination practices and defining best practice for current to near future applications of fibre optics on aircraft. This has limited the studies within this part to currently available ‘avionic’ silica fibre cables and adhesive filled butt-coupled type connectors. Many of the principles described however would still be applicable for other termination techniques. Other types of termination are considered further in the repair part of this handbook.
It is noted that the adhesive based pot-and-polish process is applicable to the majority of single-way fibre optic interconnects connectors and termini for multi-way interconnects and connectors. They share this commonality.
1.2   Need to high integrity terminations
(...)

  • Standard
    113 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3745-404:2019(Main)
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
SIST EN 3745-404:2019

This document specifies a method to determine the effects of thermal shock on an optical fibre or cable.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4660-003:2019(Main)
Aerospace series - Modular and Open Avionics Architectures - Part 003: Communications/Network
SIST EN 4660-003:2019

The purpose of this MOAA standard is to define a set of open architecture standards,
concepts & guidelines for Advanced Avionics Architectures (A3).
The three main goals for the MOAA Standards are:
— Reduced life cycle costs,
— Improved mission performance,
— Improved operational performance.
The MOAA standards are organised as a set of documents including:
— A set of agreed standards that describe, using a top down approach, the Architecture overview to all
interfaces required to implement the core within avionics system,
— The guidelines for system implementation through application of the standards.
This standard details the functionality and principle interfaces of an EN 4660 compliant network to
ensure the interoperability of Common Functional Modules and design guidelines to assist in
implementation of such a network.
The purpose of this standard is to establish by means of well defined interfaces and functionality, a
network design that is technology transparent and that is open to a multi-vendor market. Therefore,
specific data communication network topology, protocols and technologies are not identified in this
document.
Although the physical organisation and implementation of the network shall remain the System
Designers choice, in accordance with the best use of the current technology, it is necessary to define
interfaces and parameter sets in order to achieve a logical definition of the network with a defined
functionality. This definition includes:
— The generic functionality applicable to all networks.
— The logical interfaces to the Operating System and Module Support Layers.
— Optionally the physical interfaces to the Common Functional Modules (CFM).
This document identifies the principle interfaces for the Network, in Clause 4, and where appropriate,
provides requirements on network parameters to be defined.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day