EN 3841-304:2004

Aerospace series - Circuit breakers - Test methods - Part 304: Tripping points

This standard specifies a method of verifying the tripping points of circuit breakers.
It shall be used together with EN 3841-100.

Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 304: Auslösegrenzen

Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 304 : Limites de déclenchementent

Aeronavtika - Odklopniki - 304. del: Sprožilne točke

General Information

• Status: Published
• Publication Date: 21-Dec-2004
• Withdrawal Date: 21-Jun-2005
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3841-304:2005 - Aerospace series - Circuit breakers - Test methods - Part 304: Tripping points

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2005
$HURQDYWLND2GNORSQLNLGHO6SURåLOQHWRþNH
Aerospace series - Circuit breakers - Test methods - Part 304: Tripping points
Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil 304: Auslösegrenzen
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Partie 304 : Limites de
déclenchementent
Ta slovenski standard je istoveten z: EN 3841-304:2004
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3841-304
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2004
ICS 49.060
English version
Aerospace series - Circuit breakers - Test methods - Part 304:
Tripping points
Série aérospatiale - Disjoncteurs - Méthodes d'essais - Luft- und Raumfahrt - Schutzschalter - Prüfverfahren - Teil
Partie 304: Limites de déclenchement 304: Auslösegrenzen
This European Standard was approved by CEN on 10 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3841-304:2004: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Method .4

Foreword
This document (EN 3841-304:2004) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national st
...