EN 2482:2010

Aerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Bars - De ≤ 100 mm

This standard specifies the requirements relating to:
Steel FE-PL2108 (36NiCrMo16)
1 100 MPa ≤ Rm ≤ 1 300 MPa
Bars
De ≤ 100 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PL2108 (36NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Stangen - De ≤ 100 mm

Diese Europäische Norm legt die Anforderungen an
Stahl FE-PL2108 (36NiCrMo16)
1 100 MPa  Rm  1 300 MPa
Stangen
De  100 mm
zur Anwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PL2108 (36NiCrMo16) - 1 100 MPa ≤ Rm ≤ 1 300 MPa - Barres - De ≤ 100 mm

Cette norme européenne spécifie les exigences relatives à :
Acier FE-PL2108 (36NiCrMo16)
1 100 MPa  Rm  1 300 MPa
Barres
De  100 mm
pour les applications aérospatiales.

Aeronavtika - Jeklo FE-PL2108 (35NiCrMo16) - 1100 MPa ≤ Rm ≤ 1300 MPa - Palice - De ≤ 100 mm

Ta standard določa zahteve, ki se nanašajo na: jeklo FE-PL2108 (36NiCrMo16) 1100 MPa ≤ Rm ≤ 1300 MPa izkovki De ≤ 100 mm za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 21-Dec-2010
• Withdrawal Date: 29-Jun-2011
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Dec-2010
• Completion Date: 22-Dec-2010
• Ref Project: SIST EN 2482:2011 - Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1100 MPa ≤ Rm ≤ 1300 MPa - Bars - De ≤ 100 mm

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2011
$HURQDYWLND-HNOR)(3/1L&U0R03D”5P”03D3DOLFH
'H”PP
$HURVSDFHVHULHV6WHHO)(3/1L&U0R03D”5P”03D
%DUV'H”PP
/XIWXQG5DXPIDKUW6WDKO)(3/1L&U0R03D”5P”03D
6WDQJHQ'H”PP
6pULHDpURVSDWLDOH$FLHU)(3/1L&U0R03D”5P”03D
%DUUHV'H”PP
Ta slovenski standard je istoveten z: EN 2482:2010
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 2482
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2010
ICS 49.025.10
English Version
Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 100 MPa
≤ R ≤ 1 300 MPa - Bars - D ≤ 100 mm
m e
Série aérospatiale - Acier FE-PL2108 (35NiCrMo16) - 1 100 Luft- und Raumfahrt - Stahl FE-PL2108 (35NiCrMo16) - 1
MPa ≤ R ≤ 1 300 MPa - Barres - D ≤ 100 mm 100 MPa ≤ R ≤ 1 300 MPa - Stangen - D ≤ 100 mm
m e m e
This European Standard was approved by CEN on 2 July 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2482:2010: E
worldwide for CEN national Members.

Contents
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5

Foreword
This document (EN 2482:2010) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, B
...