Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification

This standard specifies the technical requirements of rectangular connectors with sealed and non-sealed rear, plastic housing, locking device, for operating temperatures from – 55 °C to 175 °C.

Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis 175 °C - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C - Partie 001 : Spécification technique

Aeronavtika - Konektorji, električni, pravokotni, s tesnilno kapo ali brez nje, plastično ohišje, zaporni mehanizem, delovna temperatura med –55 °C in 175 °C - 001. del: Tehnična specifikacija

General Information

Status
Published
Publication Date
27-May-2008
Withdrawal Date
29-Nov-2008
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
28-May-2008
Completion Date
28-May-2008

Relations

Buy Standard

Standard
EN 3545-001:2008
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3545-001:2008
01-september-2008
$HURQDYWLND.RQHNWRUMLHOHNWULþQLSUDYRNRWQLVWHVQLOQRNDSRDOLEUH]QMH
SODVWLþQRRKLãMH]DSRUQLPHKDQL]HPGHORYQDWHPSHUDWXUDPHG±ƒ&LQƒ&
GHO7HKQLþQDVSHFLILNDFLMD
Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear,
plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001:
Technical specification
Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder mit und ohne hintere
Abdichtung, Plastikgehäuse, Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
175 °C - Teil 001: Technische Lieferbedingungen
Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à
l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 °C à 175 °C
- Partie 001: Spécification technique
Ta slovenski standard je istoveten z: EN 3545-001:2008
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3545-001:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 3545-001

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2008
ICS 49.060 Supersedes EN 3545-001:2005
English Version
Aerospace series - Connectors, electrical, rectangular, with
sealed and non-sealed rear, plastic housing, locking device,
operating temperatures - 55 °C to 175 °C - Part 001: Technical
specification
Série aérospatiale - Connecteurs électriques, Luft- und Raumfahrt - Elektrische Rechtecksteckverbinder
rectangulaires, étanches et non étanches à l'arrière, à mit und ohne hintere Abdichtung, Plastikgehäuse,
boîtier en plastique, à verrouillage, températures Verriegelungssystem, Betriebstemperaturen von - 55 °C bis
d'utilisation - 55 °C à 175 °C - Partie 001 : Spécification 175 °C - Teil 001: Technische Lieferbedingungen
technique
This European Standard was approved by CEN on 14 March 2008.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3545-001:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 3545-001:2008 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Description .5
5 Design .6
6 Definition drawing and masses.7
7 Contact arrangements.9
8 Tests.17
9 Quality assurance.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.