prEN 12574-4
(Main)Stationary waste containers - Part 4: Waste-Mechatronics
Stationary waste containers - Part 4: Waste-Mechatronics
This part of EN 12574 specifies geometrical, performance and test aspects regarding the mechanical devices or electro-mechanical devices fitted on a waste container for locking the lid/s and/or for restricting the quantity of waste loadable and/or for filling level measuring.
Stationäre Abfallsammelbehälter - Teil 4: Abfall-Mechatronik
Dieser Teil der Normenreihe EN 12574 legt die geometrischen, Leistungs- und Prüfungsaspekte der mechanischen Vorrichtungen oder der an einem Abfallsammelbehälter installierten elektro-mechanischen Vorrichtungen zur Verriegelung des Deckels und/oder zur Begrenzung der Einwurfmenge und/oder zur Überwachung des Füllstandes fest.
Conteneurs fixes à déchets - Partie 4 : Mécatronique pour déchets
La présente partie du prEN 12574:2016 spécifie les aspects géométriques, les performances et les aspects des essais concernant les dispositifs mécaniques ou électromécaniques équipant un conteneur à déchets pour le verrouillage du ou des couvercles et/ou une limitation de la quantité de déchets pouvant être introduite et/ou la mesure du niveau de remplissage.
Nepremični zabojniki za odpadke - 4. del: Mehatronika zabojnikov
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12574-4:2015
01-september-2015
1HSUHPLþQL]DERMQLNL]DRGSDGNHGHO0HKDWURQLND]DERMQLNRY
Stationary waste containers - Part 4: Waste-Mechatronics
Stationäre Abfallsammelbehälter - Teil 4: Abfall-Mechatronik
Conteneurs fixes à déchets - Partie 4 : Mécatronique pour déchets
Ta slovenski standard je istoveten z: prEN 12574-4
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
oSIST prEN 12574-4:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12574-4:2015
---------------------- Page: 2 ----------------------
oSIST prEN 12574-4:2015
EUROPEAN STANDARD
DRAFT
prEN 12574-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2015
ICS 13.030.40
English Version
Stationary waste containers - Part 4: Waste-Mechatronics
Conteneurs fixes à déchets - Partie 4 : Mécatronique pour Stationäre Abfallsammelbehälter - Teil 4: Abfall-
dechets Mechatronik
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 183.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12574-4:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12574-4:2015
prEN 12574-4:2015 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Requirements .7
4.1 Classes of containers .7
4.2 General aspects .7
4.3 User interface .8
4.4 Access control .9
4.5 Filling Level Measurement (FLM) . 11
4.6 Lid/s locking device (LLD) . 12
5 Safety and health requirements .
...
SLOVENSKI STANDARD
oSIST prEN 12574-4:2016
01-november-2016
1HSUHPLþQL]DERMQLNL]DRGSDGNHGHO0HKDWURQLND]DERMQLNRY
Stationary waste containers - Part 4: Waste-Mechatronics
Stationäre Abfallsammelbehälter - Teil 4: Abfall-Mechatronik
Conteneurs fixes à déchets - Partie 4 : Mécatronique pour déchets
Ta slovenski standard je istoveten z: prEN 12574-4
ICS:
13.030.40 Naprave in oprema za Installations and equipment
odstranjevanje in obdelavo for waste disposal and
odpadkov treatment
oSIST prEN 12574-4:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12574-4:2016
---------------------- Page: 2 ----------------------
oSIST prEN 12574-4:2016
DRAFT
EUROPEAN STANDARD
prEN 12574-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2016
ICS 13.030.40
English Version
Stationary waste containers - Part 4: Waste-Mechatronics
Conteneurs fixes à déchets - Partie 4 : Mécatronique Stationäre Abfallsammelbehälter - Teil 4: Abfall-
pour déchets Mechatronik
This draft European Standard is submitted to CEN members for second enquiry. It has been drawn up by the Technical
Committee CEN/TC 183.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12574-4:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12574-4:2016
prEN 12574-4:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 8
4.1 Classes of containers . 8
4.2 General aspects . 8
4.2.1 General . 8
4.2.2 General aspects regarding mechatronic devices . 8
4.2.3 General aspects regarding Class B containers . 9
4.2.4 General aspects regarding Class C containers . 9
4.2.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.