prEN ISO 13703-2

Petroleum, petrochemical and natural gas industries - Piping systems on offshore production platforms and onshore plants - Part 2: Materials (ISO/DIS 13703-2:2021)

This document provides a set of unified requirements and specifications regarding material quality level and pre-qualification for piping material of seamless pipes, welded pipes, wrought fittings, plates, forgings, bars, castings and piping bolts/nuts used for piping systems in the oil and gas industry, both offshore and onshore.
This document covers the following material grades:
-   C-Mn steel;
-   high strength steel;
-   austenitic stainless steels;
-   duplex stainless steels;
-   nickel alloy;
-   Cu-Ni alloy;
-   titanium alloy;
-   Cu-alloy.

Erdöl- und Erdgasindustrie - Rohrleitungssysteme auf Offshore-Förderplattformen und Onshore-Anlagen - Teil 2: Rohrleitungswerkstoff (ISO/DIS 13703-2:2021)

Industries du pétrole et du gaz naturel - Conception et installation des systèmes de tuyauterie sur les plates-formes de production en mer et les installations à terre - Partie 2: Matériaux (ISO/DIS 13703-2:2021)

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Cevni sistemi na plavajočih proizvodnih objektih in v kopenskih obratih - 2. del: Materiali (ISO/DIS 13703-2:2021)

General Information

• Status: Not Published
• Publication Date: 31-Dec-2023
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 07-Mar-2023
• Due Date: 16-Jul-2023
• Completion Date: 07-Mar-2023
• Ref Project: oSIST prEN ISO 13703-2:2022 - Petroleum, petrochemical and natural gas industries - Piping systems on offshore production platforms and onshore plants - Part 2: Materials (ISO/DIS 13703-2:2021)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 13703-2:2022
01-januar-2022
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina -

Cevni sistemi na plavajočih proizvodnih objektih in v kopenskih obratih - 2. del:

Materiali (ISO/DIS 13703-2:2021)
Petroleum, petrochemical and natural gas industries - Piping systems on offshore

production platforms and onshore plants - Part 2: Materials (ISO/DIS 13703-2:2021)

Erdöl- und Erdgasindustrie - Rohrleitungssysteme auf Offshore-Förderplattformen und

Onshore-Anlagen - Teil 2: Rohrleitungswerkstoff (ISO/DIS 13703-2:2021)

Industries du pétrole et du gaz naturel - Conception et installation des systèmes de

tuyauterie sur les plates-formes de production en mer et les installations à terre - Partie

2: Matériaux (ISO/DIS 13703-2:2021)
Ta slovenski standard je istoveten z: prEN ISO 13703-2
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
oSIST prEN ISO 13703-2:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13703-2:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13703-2:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13703-2
ISO/TC 67/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2021-11-19 2022-02-11
Petroleum, petrochemical and natural gas industries —
Piping systems on offshore platforms and onshore
plants —
Part 2:
Materials
ICS: 75.180.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13703-2:2021(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2021
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
© ISO 2021 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)
Contents

Foreword ......................................................................................................................................................................... iv

Introduction..................................................................................................................................................................... v

1 Scope .......................................................................................................................................................................... 1

2 Normative references .......................................................................................................................................... 1

3 Terms and definitions .......................................................................................................................................... 8

4 Abbreviated terms ................................................................................................................................................ 9

5 Material and element datasheets .................................................................................................................. 11

5.1 General ................................................................................................................................................................... 11

5.2 Numbering system ............................................................................................................................................. 12

5.3 Deviations to ASME B31.3 ................................................................................................................................ 12

5.4 High pressure systems according to ASME B31.3 chapter IX ............................................................. 13

5.5 Parts designed to ASME BPVC VIII Div. 2 .................................................................................................... 13

5.6 Qualification of manufacturers to ISO 17782 or NORSOK M-650 ..................................................... 13

5.7 Machining of valves or valve parts from bar ............................................................................................ 14

5.8 NDT of piping and valves ................................................................................................................................. 14

5.8.1 General ............................................................................................................................................................. 14

5.8.2 NDT personnel ............................................................................................................................................... 14

5.9 Pilot castings ........................................................................................................................................................ 14

5.9.1 General ............................................................................................................................................................. 14

5.9.2 Material qualification ranges for pilot castings ................................................................................ 14

5.9.3 NDT of pilot castings .................................................................................................................................... 15

5.10 Ferritic-austenitic stainless steels ......................................................................................................... 15

5.11 Mechanical testing ....................................................................................................................................... 15

Annex A (normative) Material datasheets........................................................................................................ 17

A.1 Index ........................................................................................................................................................................ 17

A.2 Material datasheets for normal pressure service ................................................................................... 23

A.3 Material datasheets for high pressure service according to ASME B31.3 chapter IX .............. 204

Annex B (normative) Element datasheets ...................................................................................................... 254

B.1 List of element datasheets ............................................................................................................................. 254

B.2 Element datasheets .......................................................................................................................................... 255

Annex C (informative) Compliance with the European Pressure Equipment Directive ................ 264

Annex D (informative) Table of corresponding product standards ..................................................... 265

Bibliography ............................................................................................................................................................... 272

© ISO 2021 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO

collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any

patent rights identified during the development of the document will be in the Introduction and/or on

the ISO list of patent declarations received (see www.iso.org/patents).

Any trade name used in this document is information given for the convenience of users and does not

constitute an endorsement.

For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and

expressions related to conformity assessment, as well as information about ISO's adherence to the World

Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see

www.iso.org/iso/foreword.html.

This document was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore

structures for petroleum and natural gas industries, Subcommittee SC 6, Processing equipment and systems.

This edition cancels and replaces part of ISO 13703:2000, which has been technically revised and split in

three parts.
A list of all parts in the ISO 13703 series can be found on the ISO website.

Any feedback or questions on this document should be directed to the user’s national standards body. A

complete listing of these bodies can be found at www.iso.org/members.html.
iv © ISO 2021 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)
Introduction

The aim of this document is to provide a set of common supplementary requirements for the most

frequently used materials in upstream oil and gas piping systems designed according to ISO 13703-1.

Requirements are defined in material datasheets and element datasheets, which can be used for the

specification and procurement of materials for piping systems. Common fabrication, welding, inspection,

examination and testing requirements of piping systems are covered by ISO 13703-3.

This document makes normative reference to ASME B31.3 as the base code for process piping. It is

recognized that alternative codes for process piping exist that provide similar functionality. Such

alternative codes can specify alternative requirements that are in conflict with this document. Local,

national or regional regulations can also affect the specification of piping materials.

This document is not intended to limit the use of alternative materials, which are not included in this

document. Alternative material grades and product standards can be used freely within the limits of the

piping design code.
© ISO 2021 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 13703-2:2022
---------------------- Page: 8 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)
Petroleum, petrochemical and natural gas industries — Piping
systems on offshore platforms and onshore plants — Part 2:
Materials
1 Scope

This document specifies minimum requirements for materials exposed to sour environments as defined

in ISO 15156 (all parts). It does not provide guidelines for material selection. The selection of suitable

materials for a specific service including any necessary additional material requirements remains the

responsibility of the end user. Requirements related to sulphide stress cracking in corrosive petroleum

refining environments included in ISO 17945 are not covered in this document.

NOTE For the purposes of this document, NACE MR0175 is equivalent to ISO 15156 (all parts), and NACE MR0103

is equivalent to ISO 17945.

The materials covered in this document are intended to be used in piping systems designed according to

ASME B31.3 category D, and normal and high pressure fluid service as supplemented by ISO 13703-1.

This document is applicable to offshore production facilities and onshore production, processing and gas

liquefaction plants. Common requirements related to manufacture of piping and valve parts are included

in Annex A and Annex B providing material datasheets and element datasheets, respectively. These

material and element datasheets can be applied for applications other than piping systems, e.g. pressure

vessels and pumps based upon assessment of the end user and conformance with the selected design

code for the relevant equipment.
This document does not cover requirements related to:

 non-metallic piping systems according to ASME B31.3 chapter VII or ISO 14692 (all parts);

 marine piping systems, e.g. ballasting piping system, covered by classification rules;

 subsea production systems;
 downhole equipment;

 transportation pipeline systems, including flowlines, designed in accordance with a recognized

pipeline design code.

Annex C contains guidance on how to comply with the European Directive 2014/68/EU on pressure

equipment.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 148-1, Metallic materials — Charpy pendulum impact test — Part 1: Test method

ISO 3183, Petroleum and natural gas industries — Steel pipe for pipeline transportation systems

ISO 3452, Non-destructive testing — Penetrant testing
© ISO 2021 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)
ISO 3878, Hardmetals — Vickers hardness test

ISO 4499-2, Hardmetals — Metallographic determination of microstructure — Part 2: Measurement of WC

grain size

ISO 4499-4, Hardmetals - Metallographic determination of microstructure — Part 4: Characterisation of

porosity, carbon defects and eta-phase content
ISO 4624, Paints and varnishes — Pull-off test for adhesion

ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature

ISO 9606, Qualification testing of welders — Fusion welding

ISO 9712, Non-destructive testing — Qualification and certification of NDT personnel

ISO 10474, Steel and steel products — Inspection documents
ISO 10684, Fasteners — Hot dip galvanized coatings

ISO 10893-11, Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld

seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections

ISO 11970, Specification and qualification of welding procedures for production welding of steel castings

ISO 13703-1, Petroleum and natural gas industries — Piping systems on offshore production platforms and

onshore plants — Part 1: Design

ISO 14732, Welding personnel — Qualification testing of welding operators and weld setters for mechanized

and automatic welding of metallic materials

ISO 15156 (all parts), Petroleum and natural gas industries — Materials for use in H2S-containing

environments in oil and gas production
ISO 15608, Welding — Guidelines for a metallic materials grouping system

ISO 15614-1, Specification and qualification of welding procedures for metallic materials — Welding

procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys

ISO 15614-5, Specification and qualification of welding procedures for metallic materials — Welding

procedure test — Part 5: Arc welding of titanium, zirconium and their alloys

ISO 15614-7, Specification and qualification of welding procedures for metallic materials — Welding

procedure test — Part 7: Overlay welding

ISO 17637, Non-destructive testing of welds — Visual testing of fusion-welded joints

ISO 17781, Petroleum, petrochemical and natural gas industries — Test methods for quality control of

microstructure of ferritic/austenitic (duplex) stainless steels

ISO 17782, Petroleum, petrochemical and natural gas industries — Scheme for conformity assessment of

manufacturers of special materials

ISO 27509, Petroleum and natural gas industries — Compact flanged connections with IX seal ring

ISO 28079, Hardmetals — Palmqvist toughness test
2 © ISO 2021 – All rights reserved
---------------------- Page: 10 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)

ANSI/MSS SP-55, Quality standard for steel castings for valves, flanges, fittings, and other piping

components - visual method for evaluation of surface irregularities
API Spec 5L, Specification for line pipe

API Std 6ACRA, Age-hardened Nickel-based alloys for oil and gas drilling and production equipment

ASME B16.34, Valves – Flanged, threaded and welding end
ASME B31.3, Process piping

ASME Boiler and pressure vessel code (BPVC), Section V: Nondestructive examination

ASME Boiler and pressure vessel code (BPVC), Section VIII, Division 1: Rules for construction of pressure

vessels

ASME Boiler and pressure vessel code (BPVC), Section VIII, Division 2: Alternative rules

ASME Boiler and pressure vessel code (BPVC), Section VIII, Division 3: Alternative rules for high pressure

vessels

ASME Boiler and pressure vessel code (BPVC), Section IX: Welding and brazing qualifications

ASNT SNT-TC-1A, Qualification of nondestructive testing personnel

ASTM A29, Standard specification for general requirements for steel bars, Carbon and alloy, hot-wrought

ASTM A105, Standard specification for Carbon steel forgings for piping applications

ASTM A106, Standard specification for seamless carbon steel pipe for high-temperature service

ASTM A182, Standard specification for forged or rolled alloy and stainless Steel pipe flanges, forged fittings,

and valves and parts for high-temperature service

ASTM A193, Standard specification for alloy-steel and stainless steel bolting for high temperature or high

pressure service and other special purpose applications

ASTM A194, Standard specification for Carbon steel, alloy steel, and stainless steel nuts for bolts for high

pressure or high temperature service, or both

ASTM A216, Standard specification for steel castings, Carbon, suitable for fusion welding, for high-

temperature service

ASTM A234, Standard specification for piping fittings of wrought Carbon steel and alloy steel for moderate

and high temperature service

ASTM A240, Standard specification for Chromium and Chromium-Nickel stainless steel plate, sheet, and

strip for pressure vessels and for general applications

ASTM A269, Standard specification for seamless and welded austenitic stainless steel tubing for general

service
ASTM A276, Standard specification for stainless steel bars and shapes

ASTM A312, Standard specification for seamless, welded, and heavily cold worked austenitic stainless steel

pipes
© ISO 2021 – All rights reserved 3
---------------------- Page: 11 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)

ASTM A320, Standard specification for alloy-steel and stainless steel bolting for low-temperature service

ASTM A333, Standard specification for seamless and welded steel pipe for low-temperature service and

other applications with required notch toughness

ASTM A350, Standard specification for Carbon and low-alloy steel forgings, requiring notch toughness

testing for piping components

ASTM A351, Standard specification for castings, austenitic, for pressure-containing parts

ASTM A352, Standard specification for steel castings, ferritic and martensitic, for pressure-containing parts,

suitable for low-temperature service

ASTM A358, Standard specification for electric-fusion-welded austenitic Chromium-Nickel stainless steel

pipe for high-temperature service and general applications

ASTM A363, Standard specification for Zinc-coated (galvanized) steel overhead ground wire strand

ASTM A370, Standard test methods and definitions for mechanical testing of steel products

ASTM A388, Standard practice for ultrasonic examination of steel forgings

ASTM A403, Standard specification for wrought austenitic stainless steel piping fittings

ASTM A420, Standard specification for piping fittings of wrought Carbon steel and alloy steel for low-

temperature service

ASTM A450, Standard specification for general requirements for Carbon and low alloy steel tubes

ASTM A453, Standard specification for high-temperature bolting, with expansion coefficients comparable

to austenitic stainless steels

ASTM A479, Standard specification for stainless steel bars and shapes for use in boilers and other pressure

vessels

ASTM A484, Standard specification for general requirements for stainless steel bars, billets, and forgings

ASTM A488, Standard practice for steel castings, welding, qualifications of procedures and personnel

ASTM A494, Standard specification for castings, Nickel and Nickel alloy

ASTM A508, Standard specification for quenched and tempered vacuum-treated Carbon and alloy steel

forgings for pressure vessels

ASTM A516, Standard specification for pressure vessel plates, Carbon steel, for moderate- and lower-

temperature service

ASTM A564, Standard specification for hot-rolled and cold-finished age-hardening stainless steel bars and

shapes

ASTM A578, Standard specification for straight-beam ultrasonic examination of rolled steel plates for

special applications

ASTM A671, Standard specification for electric-fusion-welded steel pipe for atmospheric and lower

temperatures
4 © ISO 2021 – All rights reserved
---------------------- Page: 12 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)

ASTM A672, Standard specification for electric-fusion-welded steel pipe for high-pressure service at

moderate temperatures

ASTM A694, Standard specification for Carbon and alloy steel forgings for pipe flanges, fittings, valves, and

parts for high-pressure transmission service

ASTM A696, Standard specification for steel bars, Carbon, hot-wrought or cold-finished, special quality, for

pressure piping components

ASTM A703, standard specification for steel castings, creep-strength enhanced ferritic alloy, for pressure-

containing parts, suitable for high temperature service
ASTM A705, Standard specification for age-hardening stainless steel forgings

ASTM A781, Standard specification for castings, steel and alloy, common requirements, for general

industrial use
ASTM A788, Standard specification for steel forgings, general requirements

ASTM A789, Standard specification for seamless and welded ferritic/austenitic stainless steel tubing for

general service

ASTM A790, Standard specification for seamless and welded ferritic/austenitic stainless steel pipe

ASTM A815, Standard specification for wrought ferritic, ferritic/austenitic, and martensitic stainless steel

piping fittings

ASTM A860, Standard specification for wrought high-strength ferritic steel butt-welding fittings

ASTM A928, Standard specification for ferritic/austenitic (duplex) stainless steel pipe electric fusion welded

with addition of filler metal

ASTM A957, Standard specification for investment castings, steel and alloy, common requirements, for

general industrial use

ASTM A960, Standard specification for common requirements for wrought steel piping fittings

ASTM A961, Standard specification for common requirements for steel flanges, forged fittings, valves, and

parts for piping applications

ASTM A962, Standard specification for common requirements for bolting intended for use at any

temperature from cryogenic to the creep range

ASTM A966, Standard practice for magnetic particle examination of steel forgings using alternating current

ASTM A985, Standard specification for steel investment castings general requirements, for pressure-

containing parts

ASTM A988, Standard specification for hot isostatically-pressed stainless steel flanges, fittings, valves, and

parts for high temperature service

ASTM A995, Standard specification for castings, austenitic-ferritic (duplex) stainless steel, for pressure-

containing parts

ASTM A1058, Standard Test Methods for Mechanical Testing of Steel Products — Metric

© ISO 2021 – All rights reserved 5
---------------------- Page: 13 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)

ASTM A1080, Standard practice for hot isostatic pressing of steel, stainless steel, and related alloy castings

ASTM A1082, Standard specification for high strength precipitation hardening and duplex stainless steel

bolting for special purpose applications
ASTM B148, Standard specification for Aluminum-Bronze sand castings

ASTM B151, Standard specification for Copper-Nickel-Zinc alloy (Nickel Silver) and Copper-Nickel rod and

bar

ASTM B171, Standard specification for Copper-alloy plate and sheet for pressure vessels, condensers, and

heat exchangers

ASTM B265, Standard specification for Titanium and Titanium alloy strip, sheet, and plate

ASTM B338, Standard specification for seamless and welded Titanium and Titanium alloy tubes for

condensers and heat exchangers

ASTM B348, Standard specification for Titanium and Titanium alloy bars and billets

ASTM B363, Standard specification for seamless and welded unalloyed Titanium and Titanium alloy

welding fittings

ASTM B366, Standard specification for factory-made wrought Nickel and Nickel alloy fittings

ASTM B367, Standard specification for Titanium and Titanium alloy castings
ASTM B381, Standard specification for Titanium and Titanium alloy forgings

ASTM B443, Standard specification for Nickel-Chromium-Molybdenum-Columbium alloy and Nickel-

Chromium-Molybdenum-Silicon alloy plate, sheet, and strip

ASTM B444, Standard specification for Nickel-Chromium-Molybdenum-Columbium alloys (UNS N06625

and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon alloy (UNS N06219) pipe and tube

ASTM B446, Standard specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625),

Nickel-Chromium-Molybdenum-Silicon alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten

alloy (UNS N06650) rod and bar

ASTM B499, Standard test method for measurement of coating thicknesses by the magnetic method:

nonmagnetic coatings on magnetic basis metals
ASTM B564, Standard specification for Nickel alloy forgings

ASTM B571, Standard practice for qualitative adhesion testing of metallic coatings

ASTM B578, Standard test method for microhardness of electroplated coatings

ASTM B602, Standard test method for attribute sampling of metallic and inorganic coatings

ASTM B637, Standard specification for precipitation-hardening and cold worked Nickel alloy bars, forgings,

and forging stock for moderate or high temperature service

ASTM B705, Standard specification for Nickel-alloy (UNS N06625, N06219 and N08825) welded pipe

ASTM B733, Standard specification for autocatalytic (electroless) Nickel-Phosphorus coatings on metal

6 © ISO 2021 – All rights reserved
---------------------- Page: 14 ----------------------
oSIST prEN ISO 13703-2:2022
ISO/DIS 13703-2:2021(E)

ASTM B834, Standard specification for pressure consolidated powder metallurgy Iron-Nickel-Chromium-

Molybdenum (UNS N08367), Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625), Nickel-

Chromium-Iron alloys (UNS N06600 and N06690), and Nickel-Chromium-Iron-Columbium-Molybdenum

(UNS N07718) alloy pipe flanges, fittings, valves, and parts
ASTM B861, Standard specification for Titanium and Titanium alloy seamless pipe
ASTM B862, Standard specification for Titanium and Titanium alloy welded pipe

ASTM C633, Standard test method for adhesion or cohesion strength of thermal spray coatings

ASTM E8, Standard test methods for tension testing of metallic materials

ASTM E94, Standard guide for radiographic examination using industrial radiographic film

ASTM E112, Standard test methods for determining average grain size
ASTM E165, Standard practice for liquid penetrant testing for general industry

ASTM E186, Standard reference radiographs for heavy-walled (2 to 412 in. (50.8 to 114 mm)) steel castings

ASTM E213, Standard practice for ultrasonic testing of metal pipe and tubing

ASTM E280, Standard reference radiographs for heavy-walled (412 to 12 in. (114 to 305 mm)) steel cas

...