Thermal performance of buildings and materials - Determination of specific airflow rate in buildings - Tracer gas dilution method (ISO 12569:2017)

ISO 12569:2017 establishes methods to obtain the ventilation rate or specific airflow rate in a building space (which is considered to be a single zone) using a tracer gas.
The measurement methods apply for spaces where the combined conditions concerning the uniformity of tracer gas concentration, measurement of the exhaust gas concentration, effective mixed zone and/or fluctuation of ventilation are satisfied.
ISO 12569:2017 provides three measurement methods using a tracer gas: concentration decay method, continuous dose method, and constant concentration method.
NOTE          Specific measurement conditions are given in Table 1.

Wärmetechnisches Verhalten von Gebäuden und Werkstoffen - Bestimmung des spezifischen Luftvolumenstroms in Gebäuden - Indikatorgasverfahren (ISO 12569:2017)

Dieses Dokument legt Verfahren zur Bestimmung der Luftwechselrate oder des spezifischen Luftvolumenstroms in einem Raum eines Gebäudes (der als aus einer einzelnen Zone bestehend angesehen wird) mittels eines Indikatorgases fest.
Diese Messverfahren gelten für Räume, in denen die kombinierten Bedingungen zur gleichmäßigen Indikatorgaskonzentration, eine Messung der Abgaskonzentration, eine wirksame Mischzone und/oder ein Luftwechsel vorliegen.
Dieses Dokument umfasst drei Messverfahren, bei denen Indikatorgas zum Einsatz kommt: Verfahren mit abfallender Konzentration, Verfahren mit konstanter Injektion und Verfahren mit konstanter Konzentration.
ANMERKUNG Die spezifischen Messbedingungen sind in Tabelle 1 angegeben.

Performance thermique des bâtiments et des matériaux - Détermination du débit d'air spécifique dans les bâtiments - Méthode de dilution de gaz traceurs (ISO 12569:2017)

ISO 12569:2017 établit des méthodes permettant d'obtenir le taux de ventilation ou le débit d'air spécifique dans un espace intérieur d'un bâtiment (considéré comme ne comprenant qu'une seule zone) à l'aide d'un gaz traceur.
Les méthodes de mesure s'appliquent aux espaces où les conditions combinées relatives à l'uniformité de la concentration du gaz traceur, le mesurage de la concentration du gaz, la zone de mélange réelle et/ou la fluctuation de la ventilation sont satisfaites.
Le présent document donne trois méthodes de mesure à l'aide d'un gaz traceur: la méthode par décroissance de la concentration, la méthode par dose continue et la méthode par concentration constante.
NOTE          Les conditions de mesurage spécifiques sont indiquées dans le Tableau 1.

Toplotna izolacija v stavbah - Ugotavljanje števila izmenjav zraka v stavbah - Metoda redčenja indikatorskega plina (ISO 12569:2017)

Ta dokument določa metode za pridobitev stopnje prezračevanja ali števila izmenjav zraka v stavbnem prostoru (ki se šteje za eno območje) z uporabo indikatorskega plina.
Merilne metode se uporabljajo za prostore, v katerih so izpolnjeni kombinirani pogoji v zvezi z enotnostjo
koncentracije indikatorskega plina, merjenjem koncentracije izpušnega plina, učinkovito mešano cono in/ali pretokom ventilacije.
Ta dokument določa tri merilne metode z indikatorskim plinom: metodo razgradnje koncentracije, metodo nepretrganega odmerka in metodo stalne koncentracije.
OPOMBA: Posebni pogoji za merjenje so podani v preglednici 1.

General Information

Status
Published
Publication Date
12-Sep-2017
Withdrawal Date
30-Mar-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-Sep-2017
Completion Date
13-Sep-2017

Relations

Buy Standard

Standard
EN ISO 12569:2018
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12569:2018
01-februar-2018
1DGRPHãþD
SIST EN ISO 12569:2013
7RSORWQDL]RODFLMDYVWDYEDK8JRWDYOMDQMHãWHYLODL]PHQMDY]UDNDYVWDYEDK
0HWRGDUHGþHQMDLQGLNDWRUVNHJDSOLQD ,62
Thermal performance of buildings and materials - Determination of specific airflow rate in
buildings - Tracer gas dilution method (ISO 12569:2017)
Wärmetechnisches Verhalten von Gebäuden und Werkstoffen - Bestimmung des
spezifischen Luftvolumenstroms in Gebäuden - Indikatorgasverfahren (ISO 12569:2017)
Performance thermique des bâtiments et des matériaux - Détermination du débit d'air
spécifique dans les bâtiments - Méthode de dilution de gaz traceurs (ISO 12569:2017)
Ta slovenski standard je istoveten z: EN ISO 12569:2017
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 12569:2018 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12569:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 12569:2018


EN ISO 12569
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2017
EUROPÄISCHE NORM
ICS 91.120.10 Supersedes EN ISO 12569:2012
English Version

Thermal performance of buildings and materials -
Determination of specific airflow rate in buildings - Tracer
gas dilution method (ISO 12569:2017)
Performance thermique des bâtiments et des Wärmetechnisches Verhalten von Gebäuden und
matériaux - Détermination du débit d'air spécifique Werkstoffen - Bestimmung des spezifischen
dans les bâtiments - Méthode de dilution de gaz Luftvolumenstroms in Gebäuden -
traceurs (ISO 12569:2017) Indikatorgasverfahren (ISO 12569:2017)
This European Standard was approved by CEN on 6 July 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12569:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12569:2018
EN ISO 12569:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12569:2018
EN ISO 12569:2017 (E)
European foreword
This document (EN ISO 12569:2017) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018 and conflicting national standards shall be
withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12569:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.