EN 3660-032:2017

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard

This European Standard defines a range of cable outlets, style K, straight, shielded, sealed for heat shrinkable boot, for use with memory metal rings under the following conditions.
The mating connectors are listed in EN 3660-002.
Temperature range,   Class N    :   - 65 °C to 200 °C
Class K    :   - 65 °C to 200 °C
Class W    :   - 65 °C to 175 °C
Class T    :   - 65 °C to 175 °C (Nickel PTFE plating)
Class Z    :    - 65 °C to 175 °C (Zinc nickel plating)
Associated electrical accessories    :   EN 3660-034 memory metal rings (for shield termination backshells).
These cable outlets are designed for termination of overall shielding braid or individual cable shields. They accommodate/permit the termination of heat shrinkable boots.

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 032: Endgehäuse, Bauform K, gerade, für wärmeschrumpfende Bauteile, geschirmt, abgedichtet - Produktnorm

Diese Europäische Norm legt eine Reihe von Endgehäusen, Bauform K, gerade, geschirmt, abgedichtet für wärmeschrumpfende Bauteile, für die Verwendung mit Formgedächtnismetallring unter folgenden Bedingungen fest.
Die zugehörigen Steckverbinder sind in EN 3660-002 aufgeführt.
Temperaturbereich, Klasse N: −65 °C bis 200 °C;
Klasse K: −65 °C bis 200 °C;
Klasse W: −65 °C bis 175 °C;
Klasse T: −65 °C bis 175 °C (Nickel mit PTFE-Beschichtung);
Klasse Z: −65 °C bis 175 °C (Zink-Nickel-Beschichtung).
Zugehörige elektrische Zubehörteile: EN 3660-034 Formgedächtnismetallringe (für Schirmanschluss an Endgehäuse).
Diese Endgehäuse sind für den Anschluss von Gesamt- oder Einzelschirmen konstruiert. Sie ermöglichen den Anschluss wärmeschrumpfender Bauteile.

Série Aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 032 : Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 032. del: Kabelska spojka, tip K, ravna, za toplotno skrčljive dele, oklopljena, tesnjena - Standard za proizvod

Ta evropski standard opredeljuje različne vrste kabelskih spojk (tip K, ravne, oklopljene, tesnjene za toplotno skrčljive dele) za uporabo s spominskimi kovinskimi obročki pod naslednjimi pogoji.
Stikalni priključki so navedeni v standardu EN 3660-002.
Temperaturni razpon, razred N: od −65 °C do 200 °C
Razred K: od −65 °C do 200 °C
Razred W: od −65 °C do 175 °C
Razred T: od −65 °C do 175 °C (nikljeva prevleka PTFE)
Razred Z: od −65 °C do 175 °C (cink-nikljeva prevleka)
Povezani električni dodatki: spominski kovinski obročki iz standarda EN 3660-034 (za oklepe zaključnega oklopa)
Te kabelske spojke so zasnovane za zaključitev celotne oklopljene pletenice ali posameznih kabelskih oklopov. Omogočajo/dovoljujejo zaključevanje toplotno skrčljivih delov.

General Information

• Status: Published
• Publication Date: 05-Sep-2017
• Withdrawal Date: 30-Mar-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Sep-2017
• Completion Date: 06-Sep-2017
• Ref Project: SIST EN 3660-032:2017 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 032: Endgehäuse, Bauform K, gerade, für wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet, selbstsichernd - ProduktnormSérie Aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 032 : Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 032: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed - Product standard49.060Aerospace electric equipment and systems31.220.99Druge elektromehanske komponenteOther electromechanical componentsICS:Ta slovenski standard je istoveten z:EN 3660-032:2017SIST EN 3660-032:2017en,fr,de01-november-2017SIST EN 3660-032:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-032
September
t r s y ICS
v {ä r x r English Version
Aerospace series æ Cable outlet accessories for circular and rectangular electrical and optical connectors æ Part
r u tã Cable outletá style Ká straightá for heat shrinkable bootá shieldedá sealed æ Product standard Série Aérospatiale æ Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques æ Partie
r u t ã Raccordá type Ká droitá blindéá étancheá pour manchon thermorétractable æ Norme de produit
Luftæ und Raumfahrt æ Endgehäuse für elektrische und optische Rundæ und Rechtecksteckverbinder æ Teil
r u tã Endgehäuseá Bauform Ká geradeá für wärmeschrumpfende Bauteileá Schirmanschlußá abgedichtetá selbstsichernd æ Produktnorm This European Standard was approved by CEN on
s y April
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x x ræ r u tã t r s y ESIST EN 3660-032:2017

: − 65 °C to 200 °C Class K
: − 65 °C to 200 °C Class W
: − 65 °C to 175 °C Class T
: − 65 °C to 175 °C (Nickel PTFE plating) Class Z
:
− 65 °C to 175 °C (Zinc nickel plating) Associated electrical accessories
: EN 3660-034 memory metal rings (for shield termination backshells). These cable outlets are designed for termination of overall shielding braid or individual cable shields. They accommodate/permit the termination of heat shrinkable boots. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100: General EN 2997 (all parts), Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards EN 3660-034, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 034: Memory metal rings, style Z, for the attachment of screens — Product standard
* All its parts quoted in this European Standard. SIST EN 3660-032:2017

A-A-59569, Braid, wire (copper, tin-coated, silver-coated, or nickel coated, tubular or flat) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3660-001 apply. 4 Characteristics 4.1 Dimensions and mass For dimensions and mass, see Figures 1, 2 and 3 and Tables 1, 2, 3 and 4. For cable entry dimensions, see 4.2. All dimensions are in millimetres.
1) Published by: SAE National (US) Society of Automotive Engineers. http://www.sae.org/ SIST EN 3660-032:2017

Key 1 Thread C 2 EN 3660-034 memory metal ring 3 Marking 4 Three equally spaced holes 1 mm diameter for locking wire 5 Straight knurl, pitch manufacturers option Cable outlets may be manufactured as cast, fabricated or machined (manufacturers option). No sharp edges/burrs permissible on internal surfaces/joints. Surface finish of on all internal surfaces. Figure 1 — Cable outlet 1,6 µm max. SIST EN 3660-032:2017

max. max.
max. min. max. 08 04 5,4 0,500-20UNEF 19,1 5,85 14,5 10 06 8,1 0,625-24UNEF 21,6 9,02 14,5 12 08 10,8 0,750-20UNEF 25,4 12,20 14,5 14 08 10,8 0,875-20UNEF 29,2 12,20 14,5 16 10 13,5 1,000-20UNEF 31,8 15,37 14,5 18 12 16,2 1,06
...