EN 3375-001:2018

Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification

This European Standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.

Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 001 : Spécification technique

La présente norme spécifie les exigences, les méthodes d’essai, les conditions de qualification et d’acceptation requises des câbles électriques pour transmission de données numériques.

Aeronavtika - Električni kabli za digitalni prenos podatkov - 001. del: Tehnična specifikacija

Ta evropski standard določa zahtevane lastnosti, preskusne metode, kvalifikacijo in pogoje sprejemljivosti električnih kablov za prenos podatkov signala.

General Information

• Status: Withdrawn
• Publication Date: 21-Aug-2018
• Withdrawal Date: 18-Oct-2022
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 2 - Cables & Stripping Tools
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Oct-2022
• Ref Project: SIST EN 3375-001:2018 - Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification

Relations

• Replaces: EN 3375-001:2007 - Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
• Effective Date: 29-Aug-2018
• Replaced By: EN 3375-001:2022 - Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification
• Effective Date: 26-Oct-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3375-001:2018
01-november-2018
1DGRPHãþD
SIST EN 3375-001:2009
$HURQDYWLND(OHNWULþQLNDEOL]DGLJLWDOQLSUHQRVSRGDWNRYGHO7HKQLþQD
VSHFLILNDFLMD
Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical
specification
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 001:
Technische Lieferbedingungen
Série aérospatiale - Câbles électriques pour transmission de données numériques -
Partie 001 : Spécification technique
Ta slovenski standard je istoveten z: EN 3375-001:2018
ICS:
29.060.20 Kabli Cables
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3375-001:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3375-001:2018

---------------------- Page: 2 ----------------------

SIST EN 3375-001:2018


EN 3375-001
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2018
EUROPÄISCHE NORM
ICS 49.090 Supersedes EN 3375-001:2007
English Version

Aerospace series - Cable, electrical, for digital data
transmission - Part 001: Technical specification
Série aérospatiale - Câbles électriques pour Luft- und Raumfahrt - Elektrische Leitungen für
transmission de données numériques - Partie 001 : Digitaldatenübertragungen - Teil 001: Technische
Spécification technique Lieferbedingungen
This European Standard was approved by CEN on 6 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3375-001:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3375-001:2018
EN 3375-001:2018 (E)
Contents Page
European foreword . 3
1 Scope . 3
2 Normative references . 4
3 Terms and definitions . 4
4 Materials and construction of cables . 5
5 Required characteristics . 6
6 Tests methods . 6
7 Quality assurance . 11
8 Identification and marking . 12
9 Packaging, labelling and delivery lengths . 13

2

---------------------- Page: 4 ----------------------

SIST EN 3375-001:2018
EN 3375-001:2018 (E)
European foreword
This document (EN 3375-001:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and v
...