EN 2591-417:2001

Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)

This standard specifies a method of determining the tensile strength of crimped connections used in elements of electrical and optical connection.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 417: Zugfestigkeit (Crimpverbindung)

Diese Norm legt ein Verfahren zum Nachweis der Zugfestigkeit von Crimpverbindungen in elektrischen und optischen Verbindungselementen fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 417 : Résistance à la traction (connexion sertie)

La présente norme spécifie une méthode pour vérifier la résistance à la traction des connexions serties utilisées dans les organes de connexion électrique et optique.
Elle doit être utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)

General Information

• Status: Published
• Publication Date: 27-Nov-2001
• Withdrawal Date: 30-May-2002
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 2591-417:2004 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2004
Aerospace series - Elements of electrical and optical connection - Test methods -
Part 417: Tensile strength (crimped connection)
Aerospace series - Elements of electrical and optical connection - Test methods - Part
417: Tensile strength (crimped connection)
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 417: Zugfestigkeit (Crimpverbindung)
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 417 : Résistance a la traction (connexion sertie)
Ta slovenski standard je istoveten z: EN 2591-417:2001
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 2591-417
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2001
ICS 49.060
English version
Aerospace series - Elements of electrical and optical connection
- Test methods - Part 417: Tensile strength (crimped
connection)
Série aérospatiale - Organes de connexion électrique et Luft- und Raumfahrt - Elektrische und optische
optique - Méthodes d'essais - Partie 417: Résistance à la Verbindungselemente - Prüfverfahren - Teil 417:
traction (connexion sertie) Zugfestigkeit (Crimpverbindung)
This European Standard was approved by CEN on 4 June 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2591-417:2001 E
worldwide for CEN national Members.

Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 417: Zugfestigkeit (Crimpverbindung)Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 417 : Résistance a la traction (connexion sertie)Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-417:2001SIST EN 2591-417:2004en01-maj-2004SIST EN 2591-417:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-417November 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 417: Tensile strength (crimpedconnection)Série aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 417: Résistance à latraction (connexion sertie)Luft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 417:Zugfestigkeit (Crimpverbindung)This European Standard was approved by CEN on 4 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-417:2001 ESIST EN 2591-417:2004
...