EN 2863:2010
(Main)Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
This standard specifies the characteristics of 90° corner, counterbored fixed anchor nuts, with a self-locking feature achieved by forming the upper portion out-of-round, in heat resisting steel, MoS2 lubricated.
Classification: 1 100 MPa / 315 °C.
Luft- und Raumfahrt - Annietmuttern, selbstsichernd, 90° Eckflansch, mit zylindrischer Aussenkung, aus hochwarmfestem Stahl, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C
Diese Norm legt die Eigenschaften von unbeweglichen Annietmuttern mit 90°-Eckflansch, zylindrischer Aussenkung und einer durch Verformung des oberen Teiles erzielten Selbstsicherung, aus hochwarmfestem Stahl, MoS2-geschmiert, fest.
Klassifizierung: 1 100 MPa ) / 315 °C )
Série aérospatiale - Écrous à river, à freinage interne, fixes, d'angle 90°, avec chambrage, en acier résistant à chaud, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 315 °C
Aeronavtika - Zakovne matice, samozapiralne, fiksne, rob 90°, z izvrtino za vijake, iz toplotnoodpornega jekla, mazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °C
Ta standard določa značilnosti fiksnih zakovnih matic z 90° robom, z izvrtino za vijake, s samozapiranjem, ki je omogočeno tako, da je zgornji del oblikovan ovalno, iz toplotnoodpornega jekla, mazanih z MoS2. Klasifikacija: 1.100 MPa (pri temperaturi okolice)/315 °C.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Zakovne matice, samozapiralne, fiksne, rob 90°, z izvrtino za vijake, iz toplotnoodpornega jekla, mazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/315 °CLuft- und Raumfahrt - Annietmuttern, selbstsichernd, 90° Eckflansch, mit zylindrischer Aussenkung, aus hochwarmfestem Stahl, MoS2-geschmiert - Klasse : 1 100 MPa (bei Raumtemperatur)/315 °CSérie aérospatiale - Écrous à river, à freinage interne, fixes, d'angle 90°, avec chambrage, en acier résistant à chaud, lubrifiés MoS2 - Classification: 1100 MPa (à température ambiante)/315 °CAerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2863:2010SIST EN 2863:2010en,de01-april-2010SIST EN 2863:2010SLOVENSKI
STANDARD
SIST EN 2863:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2863
February 2010 ICS 49.030.30 English Version
Aerospace series - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C
Série aérospatiale - Écrous à river, à freinage interne, fixes, d'angle 90°, avec chambrage, en acier résistant à chaud, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 315 °C
Luft- und Raumfahrt - Annietmuttern, selbstsichernd, 90° Eckflansch, mit zylindrischer Aussenkung, aus hochwarmfestem Stahl, MoS2-geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 315 °C This European Standard was approved by CEN on 17 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2863:2010: ESIST EN 2863:2010
EN 2863:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Required characteristics .54Designation .75Marking .86Technical specification .8 SIST EN 2863:2010
EN 2863:2010 (E) 3 Foreword This document (EN 2863:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2010, and conflicting national standards shall be withdrawn at the latest by August 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.