EN 13859-2:2010

Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls

This European standard specifies the characteristics of flexible sheets for underlays for walls which are to be used in walls behind outside wall coverings in order to avoid penetration of wind and water from outside. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.

Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für Wände

Diese Europäische Norm enthält Festlegungen für die Eigenschaften von Unterdeck- und Unterspannbahnen für Wände, die hinter außenseitigen Wandverkleidungen zu verlegen sind, um das Eindringen von Wind und Wasser von außen zu verhindern. Sie legt die Anforderungen und Prüfverfahren fest und behandelt die Bewertung der Konformität der Produkte nach den hierin angegebenen Anforderungen.

Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs et cloisons extérieures

Cette norme européenne spécifie les caractéristiques des écrans souples pare-pluie, destinés à être utilisés
derrière l’habillage des murs extérieurs, afin d’éviter la pénétration du vent et de l’eau venant de l’extérieur.
Elle exprime les spécifications et les méthodes d’essai destinées à évaluer la conformité des produits avec les
prescriptions du présent document.

Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za stene

Ta evropski standard določa lastnosti hidroizolacijskih trakov za podložne folije za stene, ki se bodo uporabile v stenah za zunanjimi stenskimi prevlekami, z namenom izogniti se penetraciji vetra in vode iz zunanjosti.  Določa zahteve in preskusne metode in zagotavlja ocenjevanje skladnosti proizvodov z zahtevami tega dokumenta.

General Information

• Status: Withdrawn
• Publication Date: 22-Jun-2010
• Withdrawal Date: 29-Apr-2014
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/WG 9 - Underlays for discontinuous roof coverings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Apr-2014
• Completion Date: 30-Apr-2014
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/102 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on membranes
• Ref Project: SIST EN 13859-2:2010 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls

Relations

• Replaces: EN 13859-2:2004+A1:2008 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
• Effective Date: 28-Jun-2010
• Replaced By: EN 13859-2:2014 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
• Effective Date: 07-May-2014
• Revised: EN 13859-2:2004 - Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za steneAbdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für WändeFeuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs et cloisons extérieuresFlexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13859-2:2010SIST EN 13859-2:2010en,fr,de01-oktober-2010SIST EN 13859-2:2010SLOVENSKI
STANDARDSIST EN 13859-2:2005+A1:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13859-2
June 2010 ICS 91.100.50 Supersedes EN 13859-2:2004+A1:2008English Version
Flexible sheets for waterproofing -Definitions and characteristics of underlays - Part 2: Underlays for walls
Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs et cloisons extérieures
Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck-und Unterspannbahnen für Wände This European Standard was approved by CEN on 13 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13859-2:2010: ESIST EN 13859-2:2010

Determination of tensile properties . 13A.1 General . 13A.2 Apparatus . 13A.3 Sampling . 13A.4 Preparation of test specimens . 13A.5 Procedure . 13SIST EN 13859-2:2010

Determination of resistance to tearing . 16B.1 General . 16B.2 Apparatus . 16B.3 Sampling. 16B.4 Preparation of test specimens . 16B.5 Procedure . 16B.6 Expression and evaluation of results . 17B.7 Test report . 17Annex C (normative)
Artificial ageing by exposure to UV and heat . 18C.1 General . 18C.2 Principle. 18C.3 Apparatus . 18C.3.1 Apparatus for exposure to UV-A irradiation and elevated temperature . 18C.3.2 Apparatus for exposure to heat . 18C.4 Preparation of test specimens . 18C.4.1 Dimensions of test specimens . 18C.4.2 Number of specimens . 18C.4.3 Conditioning of test specimens . 19C.5 Procedure . 19C.5.1 Exposure to UV irradiation and elevated temperature . 19C.5.2 Exposure to heat . 19C.5.3 Testing of resistance to water penetration and tensile properties after artificial ageing . 19C.6 Expression of results . 19C.7 Test report . 19Annex D (normative)
Initial type test and frequencies of testing for factory production control . 21Annex E (informative)
Example of a product data sheet . 22E.1 General information . 22Annex ZA (informative)
Clauses of this European Standard addressing provision of the Construction Products Directive (CPD) . 24ZA.1 Scope and relevant characteristics . 24ZA.2 Procedures for attestation of conformity of underlays for walls . 25ZA.2.1 Systems of attestation of conformity . 25ZA.2.2 EC Declaration of conformity .
...