Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls

This European standard specifies the characteristics of flexible sheets for underlays for walls which are to be used in walls behind outside wall coverings in order to avoid penetration of wind and water from outside. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.

Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für Wände

Diese Europäische Norm enthält Festlegungen für die Eigenschaften von Unterdeck- und Unterspannbahnen für Wände, die hinter außenseitigen Wandverkleidungen zu verlegen sind, um das Eindringen von Wind und Wasser von außen zu verhindern. Sie legt die Anforderungen und Prüfverfahren fest und behandelt die Bewertung der Konformität der Produkte nach den hierin angegebenen Anforderungen.

Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs et cloisons extérieures

Cette norme européenne spécifie les caractéristiques des écrans souples pare-pluie, destinés à être utilisés
derrière l’habillage des murs extérieurs, afin d’éviter la pénétration du vent et de l’eau venant de l’extérieur.
Elle exprime les spécifications et les méthodes d’essai destinées à évaluer la conformité des produits avec les
prescriptions du présent document.

Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za stene

Ta evropski standard določa lastnosti hidroizolacijskih trakov za podložne folije za stene, ki se bodo uporabile v stenah za zunanjimi stenskimi prevlekami, z namenom izogniti se penetraciji vetra in vode iz zunanjosti.  Določa zahteve in preskusne metode in zagotavlja ocenjevanje skladnosti proizvodov z zahtevami tega dokumenta.

General Information

Status
Withdrawn
Publication Date
22-Jun-2010
Withdrawal Date
29-Apr-2014
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Apr-2014
Completion Date
30-Apr-2014

Relations

Buy Standard

Standard
EN 13859-2:2010
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 2. del: Podložne folije za steneAbdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck- und Unterspannbahnen für WändeFeuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs et cloisons extérieuresFlexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13859-2:2010SIST EN 13859-2:2010en,fr,de01-oktober-2010SIST EN 13859-2:2010SLOVENSKI
STANDARDSIST EN 13859-2:2005+A1:20091DGRPHãþD



SIST EN 13859-2:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13859-2
June 2010 ICS 91.100.50 Supersedes EN 13859-2:2004+A1:2008English Version
Flexible sheets for waterproofing -Definitions and characteristics of underlays - Part 2: Underlays for walls
Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 2: Ecrans souples pour murs et cloisons extérieures
Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 2: Unterdeck-und Unterspannbahnen für Wände This European Standard was approved by CEN on 13 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13859-2:2010: ESIST EN 13859-2:2010



EN 13859-2:2010 (E) 2 Contents Page 1 Scope .52 Normative references .53 Terms and definitions .64 Product characteristics .74.1 General .74.2 Dimensions, straightness and mass per unit area .74.3 Application related characteristics .74.3.1 Reaction to fire .74.3.2 Resistance to water penetration .74.3.3 Water vapour transmission properties .84.3.4 Resistance to penetration of air .84.3.5 Tensile properties .84.3.6 Resistance to tearing .84.3.7 Dimensional stability .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.