EN 1548:2007
(Main)Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen
This European Standard specifies a method of exposing test specimens of plastic and rubber sheets for roofing free from all external restraint, to contact with bitumen at an elevated temperature and methods for determining the changes in properties resulting from such exposure.
The methods for determination of changes in properties are specified as follows:
a) changes in mass directly after contact with bitumen;
b) changes in physical properties after contact with bitumen.
Abdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Verhalten nach Lagerung auf Bitumen
Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomères - Méthode d'exposition au bitume
La présente Norme européenne spécifie une méthode d’exposition d’éprouvettes de feuilles d'étanchéité de toiture plastiques et élastomères en contact avec du bitume à une température élevée, libres de toute contrainte extérieure, et des méthodes pour déterminer les changements de propriétés résultant de cette exposition.
Les méthodes de détermination des changements de propriétés spécifiées portent sur les aspects suivants :
a) les changements de masse directement après contact avec le bitume ;
b) les changements de propriétés physiques après contact avec le bitume.
Hidroizolacijski trakovi - Polimerni in elastomerni trakovi za tesnjenje streh - Metoda izpostave bitumnu
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Polimerni in elastomerni trakovi za tesnjenje streh - Metoda izpostave bitumnuAbdichtungsbahnen - Kunststoff- und Elastomerbahnen für Dachabdichtungen - Verhalten nach Lagerung auf BitumenFeuilles souples d'étanchéité - Feuilles d'étanchéité de toiture plastiques et élastomeres - Méthode d'exposition au bitumeFlexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Method for exposure to bitumen91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 1548:2007SIST EN 1548:2008en,fr,de01-februar-2008SIST EN 1548:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1548September 2007ICS 91.100.50 English VersionFlexible sheets for waterproofing - Plastic and rubber sheets forroof waterproofing - Method for exposure to bitumenFeuilles souples d'étanchéité - Feuilles d'étanchéité detoiture plastiques et élastomères - Méthode d'exposition aubitumeAbdichtungsbahnen - Kunststoff- und Elastomerbahnen fürDachabdichtungen - Verhalten nach Lagerung auf BitumenThis European Standard was approved by CEN on 27 July 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1548:2007: ESIST EN 1548:2008
Additional information.12 Annex B (informative)
Calibration of apparatus.13 SIST EN 1548:2008
1 Scope This European Standard specifies a method of exposing test specimens of plastic and rubber sheets for roofing free from all external restraint, to contact with bitumen at an elevated temperature and methods for determining the changes in properties resulting from such exposure. The methods for determination of changes in properties are specified as follows: a) changes in mass directly after contact with bitumen; b) changes in physical properties after contact with bitumen. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1849-2, Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 2: Plastic and rubber sheets for roof waterproofing EN 12311-2, Flexible sheets for waterproofing – Determination of tensile properties – Part 2: Plastic and rubber sheets for roof waterproofing EN 13416, Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Rules for sampling EN 13956:2005, Flexible sheets for waterproofing – Plastic and rubber sheets for roof waterproofing – Definitions and characteristics 3 Terms and definitions For the purposes of this European Standard, the terms and definitions given in EN 13956:2005 apply.
4 General
The bitumen compatibility of sheets with an inner layer and EPDM sheets may be determined by a change in mass. The bitumen compatibility of sheets without an inner layer may be determined by the change in Young's Modulus. Results obtained by this test method from homogeneous sheets can be applied to sheets manufactured with same chemical formulation, but having inner reinforcement layers (e.g. fabric or non-wovens of polyester or mineral fibres). NOTE See also Annex A Sheets with a non-woven backing of at least 150 g/m² or equivalent, which prevents any contact of the waterproofing membrane with bitumen when installed in accordance with the manufacturer's instructions are considered to be bitumen compatible and may be declared as such by the manufacturer. The compatibility with bitumen is determined for the underside of the sheet as installed in accordance with the manufacturer's SIST EN 1548:2008
This European standard does not necessarily assess compatibility with bitumen on the upper face.
5 Principle A test specimen is exposed, on one face only, to contact with bitumen at 50°C for 28 days. Determination of properties is made before and after contact with bitumen. 6 Apparatus 6.1 Metal plate A rectangular metal plate measuring 400 mm x 350 mm x 2 mm. 6.2 Metal mask A rectangular metal mask 3 mm thick with outside dimensions of 280 mm x 220 mm and three inside windows of 200 mm x 80 mm each (see Figure 1). The beam width of the frame shall be 10 mm.
Figure 1 — Metal mask 6.3 Glass plate A rectangular glass plate 3 mm to 8 mm thick measuring 400 mm x 350 mm. 6.4 Separation means A means of separating sheets e.g. silicon paper, talc, aluminium foil, Teflon coated fabric. 6.5 Thermometer A thermometer of suitable range and accuracy. 6.6 Balance Balance capable of reading to 0,001 g. 6.7 Dial micrometer Dial micrometer with flat anvils, accurate to 0,01 mm. SIST EN 1548:2008
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.