EN 3155-005:2019

Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard

This European Standard specifies the required characteristics and tests applicable to female electrical
contacts 005, type A, crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-004.
The contacts defined by this standard are not applicable for connector EN 2997 classes KV, SV, KF and SF
(defined in EN 2997-002).

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 005: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse T - Produktnorm

Diese Europäische Norm legt die Anforderungen und Prüfungen für elektrische Buchsenkontakte 005, Typ A, crimpbar, Klasse T, zur Verwendung in elektrischen Verbindungselementen nach EN 3155-002 fest.
Sie ist in Verbindung mit EN 3155-001 anzuwenden.
Die zugehörigen Stiftkontakte sind in EN 3155-004 festgelegt.
Die in dieser Norm festgelegten Kontakte sind nicht für Steckverbinder nach EN 2997, Klassen KV, SV, KF und SF (nach Festlegung in EN 2997-002) vorgesehen.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 005 : Contacts électriques, femelles, type A, à sertir, classe T - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 005. del: Kontakti, električni, ženski, tip A, nagubani, razred T - Standard za proizvod

Ta evropski standard določa zahtevane značilnosti in preskuse za ženske električne kontakte velikosti 005, tipa A, nagubane, razreda T, ki se uporabljajo v veznih elementih v skladu s standardom EN 3155-002. Uporabljati ga je treba skupaj s standardom EN 3155-001.
Povezani moški kontakti so določeni v standardu EN 3155-004.
Kontakti, določeni s tem standardom, se ne uporabljajo za konektor iz standarda EN 2997, razredov KV, SV, KF in SF
(opredeljeno v standardu EN 2997-002).

General Information

• Status: Published
• Publication Date: 26-Mar-2019
• Withdrawal Date: 29-Sep-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 27-Mar-2019
• Completion Date: 27-Mar-2019
• Ref Project: SIST EN 3155-005:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard

Relations

• Replaces: EN 3155-005:2006/AC:2006 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
• Effective Date: 10-Apr-2019
• Replaces: EN 3155-005:2006 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
• Effective Date: 10-Apr-2019
• Replaces: EN 4593:2011 - Aerospace series - Paints and varnishes - Determination of solar absorptance
• Effective Date: 03-Apr-2019
• Revised: prEN 3155-005 - Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard
• Effective Date: 03-Apr-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2019
1DGRPHãþD
SIST EN 4593:2011
$HURQDYWLND(OHNWULþQLNRQWDNWL]DXSRUDERYYH]QLKHOHPHQWLKGHO
.RQWDNWLHOHNWULþQLåHQVNLWLS$QDJXEDQLUD]UHG76WDQGDUG]DSURL]YRG
Aerospace series - Electrical contacts used in elements of connection - Part 005:
Contacts, electrical, female, type A, crimp, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 005: Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse T - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
005 : Contacts électriques, femelles, type A, à sertir, classe T - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-005:2019
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3155-005
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2019
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4593:2011
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 005: Contacts, electrical, female, type A,
crimp, class T - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 005 : Contacts Verwendung in Verbindungselementen - Teil 005:
électriques, femelles, type A, à sertir, classe T - Norme Elektrische Buchsenkontakte, Typ A, crimpbar, Klasse
de produit T - Produktnorm
This European Standard was approved by CEN on 8 January 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-005:2019 E
worldwide for CEN national Members.

Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Required characteristics . 5
5 Designation. 15
6 Marking . 15
7 Technical specification . 15

European foreword
This document (EN 3155-005:2019) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards shall
be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3155-005:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
1 Scope
This European Standard specifies the required characteristics and tests applicable to female electrical
contacts 005, type A, crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated male contacts are defined in EN 3155-004.
The contacts defined by this standard are not applicable for connector EN 2997 classes KV, SV, KF and SF
(defined in EN 2997-002).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (all part), Aerospace series — Elements of electrical and optical connection — Test methods
EN 2997-001, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or
non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak —
Part 001: Technical specification
EN 2997-002, Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or
non fire-resistant, operating temperatures – 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak —
Part 002: Specification of performance and contact arrangements
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and
utilization of contacts
EN 3155-004, Aerospace series — Electrical contacts used in elements of connection — Part 004: Contacts,
electrical, male, type A, crimp, class T — Product standard
EN 4434, Aerospace series — Copper or copper alloy lightweight conductors for electrical cables — Product
standard (Normal and tight tolerances)
1)
SAE AS 22520, Crimping tools, wire termination, general specification for
1)
SAE AS 81969/14, Installing and removal tools, connector electrical contact, type III, class 2, composition B
SAE AS 81969/30, Installing and removal tools, connector electrical contact, type II, class 2, composition C
1)
for unwired contacts
2)
ISO 8843, Crimp-removable contacts for electrical connectors — Identification system

1) Published by: DoD National (US) Mil. Department of Defense http://www.defenselink.mil/
2) Published by: ISO International Organization for Standardization http://www.iso.ch/
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3155-001 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Required characteristics
4.1 Specific characteristics
Type A contacts are for general application and class T corresponds to an operating temperature range
from − 65 °C to 260 °C.
4.2 Dimensions and mass
See Figures 1 and 2 and Table 1.
Dimensions and tolerances are given in millimetres and apply after surface treatment.

Key
...