iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 2591-102:1996

(Main)

Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass

Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass

This standard specifies a method for checking the dimensions and mass of elements of electrical and optical connection. It shall be used together with EN 2591. It shall be used together with EN 2591.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 102: Prüfung der Maße und Masse

Diese Norm legt ein Verfahren zur Nachprüfung der Masse und Masse von elektrischen und optischen Verbindungselementen fest. Sie ist in Verbindungen mit EN 2591 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 102: Examen des dimensions et masse

Cette norme spécifie une méthode pour vérifier les dimensions et la masse des organes de connexion électrique et optique. Elle doit être utilisée conjointement avec EN 2591.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass

General Information

Status
Published
Publication Date
20-Feb-1996
Withdrawal Date
30-Aug-1996
ICS
49.060 - Aerospace electric equipment and systems
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 2 - Electrical
Current Stage
9093 - Decision to confirm - Review Enquiry
Due Date
01-Jun-2017
Completion Date
01-Jun-2017
Ref Project
SIST EN 2591-102:2001 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 102: Examination of dimensions and mass

Buy Standard

EN 2591-102:2001EN 2591-102:2001
PreviousNext
Standard
EN 2591-102:2001
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2001
Aerospace series - Elements of electrical and optical connection - Test methods -
Part 102: Examination of dimensions and mass
Aerospace series - Elements of electrical and optical connection - Test methods - Part
102: Examination of dimensions and mass
Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren -
Teil 102: Prüfung der Maße und Masse
Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais -
Partie 102: Examen des dimensions et masse
Ta slovenski standard je istoveten z: EN 2591-102:1996
I
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 4800-003:2025(Main)
Aerospace series - Titanium and titanium alloys - Part 003: Tubes - Technical specification
SIST EN 4800-003:2025

This document specifies the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy tubes. It is intended to be applied when referred to and in conjunction with the European material standard unless otherwise specified on the drawing, order or inspection schedule.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3773-001:2024(Main)
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
SIST EN 3773-001:2025

This document specifies the single-pole temperature compensated circuit breakers rated from 1 A to 25 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 6059-505:2024(Main)
Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 505: Lightning strike and current pulse
SIST EN 6059-505:2025

This document specifies a method to measure the ability of a protective sleeve to withstand specified severities of simulated lightning strikes.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4681-004:2024(Main)
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 004: ADA family, single and multicore assembly - Product standard
SIST EN 4681-004:2025

This document specifies the characteristics of UV laser printable electrical lightweight wires ADA family for use in the on-board 115 V (phase to neutral) or 200 V (phase-to-phase) AC, 28 VDC electrical systems of aircraft at operating temperatures between −65 °C and 180 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115 VAC/200 VAC).
In addition, these cables can be suitable for use at 230 VAC/400 VAC in pressurized zones only when installed to take account of possible short circuit effects.
Other electrical system configurations are the responsibility of the users.
It is also possible to mark these cables by qualified compatible marking which satisfies the requirements of EN 3838:2022.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3774-001:2024(Main)
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification
SIST EN 3774-001:2025

This document specifies the three-pole temperature compensated circuit breakers, rated from 1 A to 25 A used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841 100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3475-606:2024(Main)
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 606: Wicking test on textile braid insulation
SIST EN 3475-606:2025

This document specifies the test methods to evaluate the wicking of wire and cable insulated with textile braid.
It is intended to be used together with EN 3475-100.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3661-001:2024(Main)
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification
SIST EN 3661-001:2025

This document specifies the single-pole temperature compensated circuit breakers with signal contacts, polarized or not, rated from 20 A to 50 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282 (all parts).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3662-001:2024(Main)
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification
SIST EN 3662-001:2025

This document specifies the three-pole temperature compensated circuit breakers with signal contacts, polarized or not, rated from 20 A to 50 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.
These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282 (all categories).

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4681-003:2024(Main)
Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 003: AD family, single, UV laser printable - Product standard
SIST EN 4681-003:2025

This document specifies the characteristics of UV laser printable electrical lightweight wires AD family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC, 28 VDC electrical systems of aircraft at operating temperatures between −65 °C and 180 °C. These cables are demonstrated to be arc resistant in sizes AWG 24 to 14 (115 VDC/200 VDC).
In addition, these cables can be suitable for use at 230 VAC/400 VAC in pressurized zones only when installed to take account of possible short circuit effects.
Other electrical system configurations are the responsibility of the users.
It is also possible to mark these cables by qualified compatible marking which satisfies the requirements of EN 3838:2022.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2714-014:2024(Main)
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 014: DR family, 1 to 11 cores, taped, screened (braided) and jacketed, UV laser printable - Product standard
SIST EN 2714-014:2025

This document specifies the characteristics of UV laser printable DR family, 1 to 11 cores, taped, screened (braided) and jacketed electrical lightweight cables for use in the on-board electrical systems of aircraft, at operating temperatures between −55 °C and 260 °C. Nevertheless, if needed, −65 °C is also acceptable as shown by cold test.
It is possible to mark these cables by qualified compatible marking, in line with EN 3838.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day