EN 2590:2017

Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions

This European Standard defines the dimensions and tolerances of sheets and plates, hot rolled, in steel, used in aerospace constructions.

Luft- und Raumfahrt - Stahl - Bleche und Platten, warmgewalzt - Maße

Série aérospatiale - Acier - Tôles et plaques laminées à chaud - Dimensions

Aeronavtika - Jeklo - Vroče valjana pločevina in plošče - Mere

Ta evropski standard določa mere in tolerance za pločevino in plošče iz vroče valjanega jekla za uporabo v aeronavtiki.

General Information

• Status: Published
• Publication Date: 21-Feb-2017
• Withdrawal Date: 30-Aug-2017
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Feb-2017
• Completion Date: 22-Feb-2017
• Ref Project: SIST EN 2590:2017 - Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2017
$HURQDYWLND-HNOR9URþHYDOMDQDSORþHYLQDLQSORãþH0HUH
Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions
Luft- und Raumfahrt - Stahl - Bleche und Platten, warmgewalzt - Maße
Série aérospatiale - Acier - Tôles et plaques laminées à chaud - Dimensions
Ta slovenski standard je istoveten z: EN 2590:2017
ICS:
49.025.10 Jekla Steels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2590
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel - Sheets and plates, hot rolled -
Dimensions
Série aérospatiale - Acier - Tôles et plaques laminées à Luft- und Raumfahrt - Stahl - Bleche und Platten,
chaud - Dimensions warmgewalzt - Maße
This European Standard was approved by CEN on 14 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2590:2017 E
worldwide for CEN national Members.

Contents
Page
European foreword . 3
1 Scope. 4
2 Normative references. 4
3 Required characteristics. 5
3.1 Materials . 5
3.2 Form. 5
3.3 Dimensions . 5
3.3.1 Thicknesses and masses . 5
3.3.2 Widths . 6
3.3.3 Lengths . 6
3.4 Dimensional tolerances. 7
3.4.1 Thicknesses . 7
3.4.2 Widths . 7
3.4.3 Lengths . 8
3.5 Form tolerances . 8
3.5.1 Squareness. 8
3.5.2 Local straightness . 8
3.5.3 Flatness. 9
4 Designation. 9

European foreword
This document (EN 2590:2017) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2017, and conflicting national standards shall be withdrawn
at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsib
...