EN 4059:2001

Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm < D < 5,0 mm - Dimensions

This standard specifies the dimensions and tolerances of:
Filler rods and filler wires for welding
in steel
Diameter 0,5 mm < D < 5,0 mm
for aerospace applications.

Luft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus Stahl - Durchmesser 0,5 mm £ D £ 5,0 mm - Maße

Diese Norm legt die Maße und Toleranzen von:
Schweißzusatzstäben und -drähte
aus Stahl
Durchmesser 0,5 mm = D = 5,0 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Baguettes et fils d'apport de soudage en acier - Diamètres 0,5 mm < D < 5,0 mm - Dimensions

Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm < D < 5,0 mm - Dimensions

General Information

• Status: Published
• Publication Date: 19-Jun-2001
• Withdrawal Date: 30-Dec-2001
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 01-Jun-2017
• Completion Date: 14-Apr-2025
• Ref Project: SIST EN 4059:2002 - Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm < D < 5,0 mm - Dimensions

Overview

EN 4059:2001 is a European aerospace series standard prepared under AECMA and adopted by CEN that specifies the dimensions and tolerances for filler rods and filler wires used for welding in steel for aerospace applications. The standard covers metallic filler product form, recommended dimensions and linear mass information, length options, and dimensional and geometric tolerances for diameters in the range 0.5 mm < D < 5.0 mm.

This standard is intended to ensure consistent procurement, manufacturing and inspection practices across the aerospace supply chain where steel welding consumables are used.

Key Topics

• Scope: Filler rods and filler wires for welding in steel for aerospace use, diameter range 0.5 mm < D < 5.0 mm.
• Form: The standard defines product form and refers to an illustrative figure (see EN 4059 document).
• Recommended dimensions and mass: A table of nominal diameters, cross-sectional areas and linear mass values is provided (calculated for information using a density of 7.85 kg/dm3).
• Length options:
  • Rods: standard length specified as 1 000 mm.
  • Wires: length to be specified on the order; fixed or random lengths may be agreed.
  • Order must state whether bars are supplied in fixed or random lengths; minimum and maximum values must be specified for random lengths.
• Dimensional tolerances:
  • Rods: For 0.8 mm ≤ D ≤ 5.0 mm, a diameter tolerance of 0.1 mm is specified.
  • Wires: Diameter-dependent tolerances are provided in tabular form (examples from the standard):
    • 0.5 mm ≤ D ≤ 0.8 mm - tolerance values listed in table 3
    • 0.8 mm ≤ D ≤ 2.8 mm - tolerance values listed in table 3
    • 2.8 mm ≤ D ≤ 5.0 mm - tolerance values listed in table 3
• Length tolerance: Tolerances on length of rods are specified as 5 mm (see EN 4059 for exact notation).
• Geometric tolerance: Roundness shall be contained within the diameter tolerances.
• Normative reference: EN 4258 (organization of aerospace metallic material standards) is cited.

Applications

EN 4059:2001 is directly applicable to:

• Specification and procurement of steel filler rods and wires for aerospace welding operations.
• Incoming inspection and dimensional quality control at manufacturers, suppliers and maintenance organizations.
• Ensuring interchangeability of welding consumables across suppliers and national markets within CEN member states.

Benefits include clearer ordering, reduced non-conformance, and consistent acceptance criteria for diameter, length and roundness.

Related Standards

• EN 4258 - Aerospace series: General organization of metallic material standardization and links between EN standards.

For full technical details, figures and complete tables, consult the official EN 4059:2001 publication available from CEN or national standards bodies.

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm < D < 5,0 mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte aus Stahl - Durchmesser 0,5 mm L D L 5,0 mm - MaßeSérie aérospatiale - Baguettes et fils d'apport de soudage en acier - Diametres 0,5 mm < D < 5,0 mm - DimensionsAerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm < D < 5,0 mm - Dimensions49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 4059:2001SIST EN 4059:2002en01-januar-2002SIST EN 4059:2002SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4059June 2001ICS 49.025.10English versionAerospace series - Filler rods and filler wires for welding in steel- Diameter 0,5 mm
D
5,0 mm - DimensionsSérie aérospatiale - Baguettes et fils d'apport de soudageen acier - Diamètres 0,5 mm
D
5,0 mm - DimensionsLuft- und Raumfahrt - Schweißzusatzstäbe und -drähte ausStahl - Durchmesser 0,5 mm
D
5,0 mm - MaßeThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4059:2001 ESIST EN 4059:2002

Page 2EN 4059:2001ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This Eu
...