EN 2591-100:2005

Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

This standard specifies the general requirements for the methods of testing elements of electrical, optical and data transmission system connections used in aerospace applications.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 100: Allgemeines

Diese Norm legt die allgemeinen Anforderungen an Prüfverfahren für elektrische und optische Verbindungselemente und Verbindungselemente von Datenübertragungssystemen zur Verwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 100 : Généralités

Aeronavtika – Elementi električnih in optičnih povezav – Preskusne metode – 100. del: Splošno

General Information

• Status: Withdrawn
• Publication Date: 25-Oct-2005
• Withdrawal Date: 14-Aug-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Aug-2018
• Ref Project: SIST EN 2591-100:2006 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General

Relations

• Replaced By: EN 2591-100:2018 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
• Effective Date: 06-Feb-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: GeneralSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 100 : GénéralitésLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 100: AllgemeinesTa slovenski standard je istoveten z:EN 2591-100:2005SIST EN 2591-100:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 2591-100:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-100October 2005ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Test methods - Part 100: GeneralSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 100 : GénéralitésLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 100:AllgemeinesThis European Standard was approved by CEN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2591-100:2005: E



EN 2591-100:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Standard test conditions.7 5 Others.8 5.1 Fibre end preparation.8 5.2 Termination cleaning.10 5.3 Light Launch System (LLS).10 5.4 Light Detection System (LDS).13 6 List of test methods.14 7 Test report.19



EN 2591-100:2005 (E) 3 Foreword This European Standard (EN 2591-100:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2006, and conflicting national standards shall be withdrawn at the latest by April 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all suc
...