EN ISO 12001:2009
(Main)Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996)
Specifies the technical requirements of a noise test code for a specific family of machinery and equipment. It is primarily applicable to stationary machinery, including hand-held tools. The purpose of the noise test code is to permit comparable test results to be obtained on the noise emissions of machines from the same family.
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Regeln für die Erstellung und Gestaltung einer Geräuschmeßnorm (ISO 12001:1996)
Diese Internationale Norm legt die technischen Anforderungen für eine maschinenspezifische Geräuschmessnorm
fest. Sie gilt in erster Linie für stationäre Maschinen und Geräte einschließlich handgehaltener
Maschinen sowie solche, bei denen eine Gefährdung infolge deren Bewegung oder durch das Heben von
Lasten ausgeht.
Der Zweck einer Geräuschmessnorm besteht darin, für die Geräuschemission von Maschinen derselben Art
vergleichbare Messergebnisse zu erhalten und somit dem Verbraucher Vergleiche zu ermöglichen sowie
Geräuschemissionsangaben nachzuprüfen. Die in einer Geräuschmessnorm beschriebenen Größen sind
auch für Geräuschangaben in privaten Verträgen, zur Planung und für Geräuschminderungszwecke geeignet.
Für verschiedene Arten von Maschinen und Geräten wurden spezielle Messnormen erstellt und werden in
Übereinstimmung mit den Festlegungen der Internationalen Grundnormen angewendet. Geräuschmessnormen
legen Einzelheiten bezüglich der Aufstellung, der Lastbedingungen und Betriebszustände für die
bestimmte Maschinenart fest, zu der die zu untersuchende Maschine gehört, sowie den Ort für einen
Arbeitsplatz (bzw. Arbeitsplätze) und, falls zutreffend, für weitere festzulegende Orte.
Der Zweck dieser Internationalen Norm besteht darin, technische Normungsgremien, die für bestimmte
Maschinen- oder Gerätearten zuständig sind, bei der Erstellung von Geräuschmessnormen zu unterstützen
und sicherzustellen, dass diese Normen
- so gleichartig wie möglich sind und mit anderen Messnormen dieselbe Grundstruktur aufweisen;
- mit den Grundnormen zur Messung, Angabe und Nachprüfung von Geräuschemissionen in voller
Übereinstimmung stehen und
- die neuesten technischen Erkenntnisse bezüglich der Verfahren zur Bestimmung der Geräuschemission
der betreffenden Maschinen- oder Geräteart berücksichtigen.
ANMERKUNG 1 In Anhang A sind die Internationalen Grundnormen aufgeführt, die bei der Erstellung von Geräuschmessnormen
zu berücksichtigen sind. (...)
Acoustique - Bruit émis par les machines et équipements - Règles pour la préparation et la présentation d'un code d'essai acoustique (ISO 12001:1996)
Akustika - Emisija hrupa naprav in opreme - Pravila za oblikovanje in pripravo pravil za merjenje hrupa (ISO 12001:1996)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2009
1DGRPHãþD
SIST EN ISO 12001:1999
SIST EN ISO 12001:1999/AC:1999
Akustika - Emisija hrupa naprav in opreme - Pravila za oblikovanje in pripravo
pravil za merjenje hrupa (ISO 12001:1996)
Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and
presentation of a noise test code (ISO 12001:1996)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Regeln für die Erstellung
und Gestaltung einer Geräuschmeßnorm (ISO 12001:1996)
Acoustique - Bruit émis par les machines et équipements - Règles pour la préparation et
la présentation d'un code d'essai acoustique (ISO 12001:1996)
Ta slovenski standard je istoveten z: EN ISO 12001:2009
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 12001
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2009
ICS 17.140.20 Supersedes EN ISO 12001:1996
English Version
Acoustics - Noise emitted by machinery and equipment - Rules
for the drafting and presentation of a noise test code (ISO
12001:1996)
Acoustique - Bruit émis par les machines et équipements - Akustik - Geräuschabstrahlung von Maschinen und
Règles pour la préparation et la présentation d'un code Geräten - Regeln für die Erstellung und Gestaltung einer
d'essai acoustique (ISO 12001:1996) Geräuschmeßnorm (ISO 12001:1996)
This European Standard was approved by CEN on 3 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12001:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
The text of ISO 12001:1996 has been prepared by Technical Committee ISO/TC 43 “Acoustics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 12001:2009 by
Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12001:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12001:1996 has been approved by CEN as a EN ISO 12001:2009 without any modification.
IS0
INTERNATIONAL
STANDARD
First edition
1996-l 2-l 5
- Noise emitted by machinery
Acoustics
and equipment - Rules for the drafting
and presentation of a noise test code
Acoustique - Bruits 6mis par /es machines et Bquipements - R&g/es
pour la prgpara tion et la p&en ta tion d ‘un code d ’essai acous tique
Reference number
IS0 12001 :I 996(E)
IS0 12001:1996(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 12001 was prepared by Technical Committee
lSO/TC 43, Acoustics, Subcommittee SC 1, Noise.
This first edition of IS0 12001 replaces parts of IS0 2204.
part of this International Standard. An-
Annexes A and B form an integral
nexes C and D are for i nfo rmation only.
0 IS0 1996
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
0 IS0
IS0 12001:1996(E)
Introduction
In the determination, declaration and verification of noise emission values
for specific types of machinery and equipment, standardized noise test
codes are required for many purposes.
Several basic International Standards dealing with the noise emitted by
machinery and equipment exist. In order to prepare a noise test code for
a specific family of machinery or equipment, it is necessary to select the
most appropriate basic documents and to establish additional require-
ments for that family (e.g. installation and mounting conditions, operating
conditions, measurement positions, noise declarations, information to be
recorded and reported, etc.).
A noise test code is a standard for a specific family, sub-family or type of
machinery or equipment. Such a code gives all the information necessary
to carry out as efficiently as possible the determination, declaration and
verification of the noise emission characteristics of the machine under
test. This International Standard specifies what information is necessary
for the preparation of noise test codes.
This page intentionally left blank
INTERNATIONAL STANDARD 0 IS0 IS0 12001:1996(E)
Acoustics - Noise emitted by machinery and
equipment - Rules for the drafting and presentation
of a noise test code
- are in full accordance with basic standards on
1 Scope
measurement, declaration and verification of noise
emissions; and
- reflect the latest technical knowledge of methods
This International Standard specifies the technical re-
of determining the noise emissions from the
quirements of a noise test code for a specific family
specific family of machinery or equipment under
of machinery or equipment. It is primarily applicable
consideration.
to stationary machinery and equipment, including
hand-held tools, as well as those that present hazards
due to mobility or load lifting.
NOTE 1 Annex A lists the basic International Standards
to be used in the drafting of a noise test code. An outline
of a typical noise test code summarizing the information
The purpose of a noise test code is to permit com-
that is required is given in annex B. Noise emission quan-
parable test results to be obtained on the noise
tities are described in annex C.
emissions of machines from the same family, thus
enabling users to make comparisons and to check the
declared noise emission data. The quantities de-
2 Normative references
scribed in a noise test code are also useful for noise
specifications in private contracts, for planning and for
The following standards contain provisions which,
noise reduction purposes. through reference in this text, constitute provisions
of this International Standard. At the time of publica-
Specific test codes for various types of machinery and tion, the editions indicated were valid. All standards
equipment are established and used in accordance
are subject to revision, and parties to agreements
with the requirements of basic International Stan-
based on this International Standard are encouraged
dards. Standardized noise test codes give detailed re-
to investigate the possibility of applying the most re-
quirements on mounting, loading and operating cent editions of the standards indicated below.
conditions for the particular family to which the ma- Members of IEC and IS0 maintain registers of cur-
chinery under test belongs, as well as the location of rently valid International Standards.
a work station(s) and other specified positions (if any).
IS0 3740:1980, Acoustics - Determination of sound
power levels of noise sources - Guidelines for the
The purpose of this International Standard is to assist
use of basic standards and for the preparation of noise
technical standardization committees responsible for
specific families of machinery or equipment in pre- test codes.
paring noise test codes to ensure that such noise test
IS0 3741: -l), Acoustics - Determination of sound
codes
power levels of noise sources using sound
pressure - Precision methods for reverberation
- are as homogeneous as possible, with each indi-
rooms.
vidual test code having the same basic structure;
I) To be published. (Revision of IS0 3741:1988 and IS0 37421988)
IS0 12001:1996(E) 0 IS0
IS0 3743-l :I 994, Acoustics - Determination of sound pressure levels at a work station and at other
sound power levels of noise sources - Engineering specified positions - Survey me thod in situ.
methods for small, movable sources in reverberant
IS0 11203:1995, Acoustics - Noise emitted by ma-
fields - Part I: Comparison method for hard-walled
chinery and equipment - Determination of emission
test rooms.
sound pressure levels at a work station and at other
IS0 3743-2:1994, Acoustics - Determination of specified positions from the sound power level.
sound power levels of noise sources using sound
IS0 11204: 1995, Acoustics - Noise emitted by ma-
pressure - Engineering methods for small, movable
chinery and equipment - Measurement of emission
sources in reverberant fields - Part 2: Methods for
sound pressure levels at a work station and at other
special reverberation test rooms.
specified positions - Method requinng environmental
IS0 3744: 1994, Acoustics - Determination of sound corrections.
power levels of noise sources using sound pressure
IEC 651 :I 979, Sound level meters, and Amend-
- Engineering method in an essentially free field over
ment 1: 1993.
a reflecting plane.
I EC 804: 1985, Integrating-averaging sound level
IS0 3745: 1977, Acoustics - Determination of sound
meters, and Amendment I:1989 and Amend-
power levels of noise sources - Precision methods
ment 2: 1993.
for anechoic and semi-anechoic rooms.
I EC 1043: 1993, Electroacoustics - Instruments for
- Determination of sound
IS0 3746: 1995, Acoustics
the measurement of sound intensity - Measurement
power levels of noise sources using sound pressure
with pairs of pressure sensing microphones.
- Survey method using an enveloping measurement
surface over a reflecting plane.
I EC 1260: 1995, Electroacoustics - Octave-band and
fractional-octave-band filters.
IS0 3747: 1987, Acoustics - Determination of sound
power levels of noise sources - Survey method us-
ing a reference sound source.
3 Definitions
IS0 4871: 1996, Acoustics - Declaration and verifi-
For the purposes of this International Standard, the
cation of noise emission values of machinery and
following definitions apply.
equlpmen t.
3.1 basic noise emission standard (B-type stan-
IS0 9614-I :I 993, Acoustics - Determination of
dard): Standard which specifies the procedure for
sound power levels of noise sources using sound in-
determining the noise emission of machinery and
tensity - Part I: Measurement at discrete points.
equipment in such a way as to obtain reliable, repro-
ducible results with a specified degree of accuracy.
IS0 9614-2:1996, Acoustics - Determination of
sound power levels of noise sources using sound in-
3.2 noise test code (C-type standard): A standard
tensity - Part 2: Measurement by scanning.
that is applicable to a particular class, family or type
of machinery or equipment, which specifies all the
IS0 11200:1995, Acoustics - Noise emitted by ma-
information necessary to carry out efficiently the de-
chinery and equipment - Guidelines for the use of
termination, declaration and verification of the noise
basic standards for the determination of emission
emission characteristics under standardized con-
sound pressure levels at a work station and at other
ditions.
specified po
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.