EN 2591-707:2001

Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator

This standard specifies a method of measuring the characteristic impedance of:
-   a permanent bus terminator;
-   a removable bus or stub terminator.
It shall be used together with EN 2591-100.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 707: Elektrische Elemente - Messung des Wellenwiderstands eines Bus- oder Stichleitungsabschlusses

Diese Norm legt ein Verfahren zum Messen des Wellenwiderstandes
¾ eines nichtlösbaren Busabschlusses,
¾ eines lösbaren Bus- oder Stichleitungsabschlusses
fest.
Sie ist in Verbindung mit EN 2591-100 anzuwenden.

Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 707 : Organes électriques - Mesure de l'impédance caractéristique d'un bus ou d'une terminaison de dérivation

La présente norme spécifie une méthode de mesure de l'impédance caractéristique :
-   d'une terminaison de bus fixe ;
-   d'une terminaison de bus ou de dérivation amovible.
Elle doit être utilisée conjointement avec EN 2591-100.

Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator

General Information

• Status: Published
• Publication Date: 20-Nov-2001
• Withdrawal Date: 30-May-2002
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 01-Jun-2017
• Ref Project: SIST EN 2591-707:2004 - Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminatorLuft- und Raumfahrt - Elektrische und optische Verbindungselemente - Prüfverfahren - Teil 707: Elektrische Elemente - Messung des Wellenwiderstands eines Bus- oder StichleitungsabschlussesSérie aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 707 : Organes électriques - Mesure de l'impédance caractéristique d'un bus ou d'une terminaison de dérivationAerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2591-707:2001SIST EN 2591-707:2004en01-maj-2004SIST EN 2591-707:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2591-707November 2001ICS 49.060English versionAerospace series - Elements of electrical and optical connection- Test methods - Part 707: Electrical elements - Measurement ofcharacteristic impedance of a bus or a stub terminatorSérie aérospatiale - Organes de connexion électrique etoptique - Méthodes d'essais - Partie 707: Organesélectriques - Mesure de l'impédance caractéristique d'unbus ou d'une terminaison de dérivationLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Prüfverfahren - Teil 707:Elektrische Elemente - Messung des Wellenwiderstandseines Bus- oder StichleitungsabschlussesThis European Standard was approved by CEN on 4 July 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄ
...