prEN ISO/IEEE 11073-10471
(Main)Health informatics - Device interoperability - Part 10471: Personal Health Device Communication - Device Specialization - Independent Living Activity Hub (ISO/IEEE FDIS 11073-10471:2024)
Health informatics - Device interoperability - Part 10471: Personal Health Device Communication - Device Specialization - Independent Living Activity Hub (ISO/IEEE FDIS 11073-10471:2024)
Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between independent living activity hubs and managers (e.g., cell phones, personal computers, personal health appliances, and set top boxes) in a manner that enables plug-and-play interoperability. It leverages appropriate portions of existing standards, including ISO/IEEE 11073 terminology and information models. It specifies the use of specific term codes, formats, and behaviors in telehealth environments restricting ambiguity in base frameworks in favor of interoperability. This standard defines a common core of communication functionality for independent living activity hubs. In this context, independent living activity hubs are defined as devices that communicate with simple situation monitors (binary sensors), normalize information received from the simple environmental monitors, and provide this normalized information to one or more managers. This information can be examined, for example, to determine when a person’s activities/behaviors have deviated significantly from what is normal for them such that relevant parties can be notified. Independent living activity hubs will normalize information from the following simple situation monitors (binary sensors) for the initial release of the proposed standard: fall sensor, motion sensor, door sensor, bed/chair occupancy sensor, light switch sensor, smoke sensor, (ambient) temperature threshold sensor, personal emergency response system (PERS), and enuresis sensor (bed-wetting).
Medizinische Informatik - Interoperabilität von Geräten - Teil 10471: Kommunikation von Geräten für die persönliche Gesundheit - Gerätespezifikation - Schnittstellenkonzentrator und - umsetzer für assistierende Systeme (ISO/IEEE FDIS 11073-10471:2024)
Informatique de santé - Interopérabilité des dispositifs - Partie 10471: Titre manque (ISO/IEEE FDIS 11073-10471:2024)
Dans le contexte de la famille de normes ISO/IEEE 11073 relatives à la communication entre des dispositifs, la présente norme établit une définition normative de la communication entre des concentrateurs d’activités pour une vie autonome et des gestionnaires (par exemple des téléphones cellulaires, des ordinateurs personnels, des équipements personnels de santé et des boîtiers décodeurs) d’une manière qui permet une interopérabilité du type prêt à l’emploi. Elle s’appuie sur les parties appropriées de normes existantes, y compris la terminologie et des modèles d’informations de l’ISO/IEEE 11073. Elle spécifie l’utilisation de codes, de formats et de comportements en termes spécifiques dans les environnements de télésanté, en limitant l’ambiguïté dans les cadres de travail de base en faveur de l’interopérabilité. La présente norme définit un noyau commun de fonctionnalités de communication pour les concentrateurs d’activités pour une vie autonome. Dans ce contexte, des concentrateurs d’activités pour une vie autonome sont définis comme des dispositifs qui communiquent avec de simples dispositifs de surveillance de situation (capteurs binaires), normalisent des informations reçues des simples dispositifs de surveillance d’environnement et fournissent ces informations normalisées à un ou plusieurs gestionnaires. Ces informations peuvent être examinées (par exemple) pour déterminer le moment où les activités ou les comportements d’une personne se sont particulièrement écartés de ce qui constitue la normale pour eux de telle sorte que des tiers concernés puissent en être informés. Les concentrateurs d’activités pour une vie autonome normaliseront des informations provenant des simples dispositifs de surveillance suivants (capteurs binaires) dans le cadre de l’édition initiale de la norme proposée : capteur de chute, capteur de mouvement, capteur de porte, capteur d’occupation de lit/chaise, capteur d’interrupteur de lumière, détecteur de fumée, sonde de température (ambiante) à seuil, système de réponse d’urgence personnel (PERS) et capteur d’énurésie (lit mouillé).
Zdravstvena informatika - Interoperabilnost naprav - 10471. del: Komunikacija osebnih medicinskih naprav - Specialne naprave - Sistem hišnih naprav za samostojno življenje starejših in bolnih (ISO/IEEE FDIS 11073-10471:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Zdravstvena informatika - Interoperabilnost naprav - 10471. del: Komunikacija
osebnih medicinskih naprav - Specialne naprave - Sistem hišnih naprav za
samostojno življenje starejših in bolnih (ISO/IEEE FDIS 11073-10471:2024)
Health informatics - Device interoperability - Part 10471: Personal Health Device
Communication - Device Specialization - Independent Living Activity Hub (ISO/IEEE
FDIS 11073-10471:2024)
Medizinische Informatik - Interoperabilität von Geräten - Teil 10471: Kommunikation von
Geräten für die persönliche Gesundheit - Gerätespezifikation - Schnittstellenkonzentrator
und - umsetzer für assistierende Systeme (ISO/IEEE FDIS 11073-10471:2024)
Informatique de santé - Interopérabilité des dispositifs - Partie 10471: Titre manque
(ISO/IEEE FDIS 11073-10471:2024)
Ta slovenski standard je istoveten z: prEN ISO/IEEE 11073-10471
ICS:
11.180.99 Drugi standardi v zvezi s Other standards related to
pripomočki za invalide aids for disabled and
handicapped people
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
FINAL DRAFT
International
Standard
ISO/IEEE
FDIS
11073-10471
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
2024-04-11
Part 10471:
Personal Health Device
Voting terminates on:
2024-08-29
Communication — Device
Specialization- Independent Living
Activity Hub
This document is circulated as received from the committee secretariat.
FAST TRACK PROCEDURE
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/CEN PARALLEL PROCESSING LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Reference number
ISO/IEEE FDIS 1107310471:2024(en) © IEEE 2024
FINAL DRAFT
ISO/IEEE FDIS 11073-10471:2024(en)
International
Standard
ISO/IEEE
FDIS
11073-10471
ISO/TC 215
Health informatics — Device
Secretariat: ANSI
interoperability —
Voting begins on:
Part 10471:
Personal Health Device
Voting terminates on:
Communication — Device
Specialization- Independent Living
Activity Hub
This document is circulated as received from the committee secretariat.
FAST TRACK PROCEDURE
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT,
WITH THEIR COMMENTS, NOTIFICATION OF ANY
RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE
AND TO PROVIDE SUPPOR TING DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
© IEEE 2024
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO
ISO/CEN PARALLEL PROCESSING
LOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL
the internet or an intranet, without prior written permission. Permission can be requested from IEEE at the address below.
TO BECOME STAN DARDS TO WHICH REFERENCE MAY BE
MADE IN NATIONAL REGULATIONS.
Institute of Electrical and Electronics Engineers, Inc
3 Park Avenue, New York
NY 10016-5997, USA
Email: stds.ipr@ieee.org
Website: www.ieee.org
Published in Switzerland Reference number
ISO/IEEE FDIS 1107310471:2024(en) © IEEE 2024
© IEEE 2024 – All rights reserved
ii
ISO/IEEE 11073-10471:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee has
been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types of
ISO document should be noted (see www.iso.org/directives).
IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinating
Committees of the IEEE Standards Association (IEEE-SA) Standards Board. The IEEE develops its standards
through a consensus development process, approved by the American National Standards Institute, which
brings together volunteers representing varied viewpoints and interests to achieve the final product.
Volunteers are not necessarily members of the Institute and serve without compensation. While the IEEE
administers the process and establishes rules to promote fairness in the consensus development process, the
IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its
standards.
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent rights
in respect thereof. As of the date of publication of this document, ISO had not received notice of (a) patent(s)
which may be required to implement this document. However, implementers are cautioned that this may not
represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
ISO/IEEE 11073-10471 was prepared by the IEEE 11073 Standards Committee of the IEEE Engineering in
Medicine and Biology Society (as IEEE Std 11073-10471) and drafted in accordance with its editorial rules. It
was adopted, under the “fast-track procedure” defined in the Partner Standards Development Organization
cooperation agreement between ISO and IEEE, by Technical Committee ISO/TC 215, Health informatics.
This second edition cancels and replaces the first edition (ISO/IEEE 11073-10471:2010), which has been
technically revised.
The main changes are as follows:
— added current value sensors (temperature, humidity, utility usage);
— added humidity alert sensor;
— added support for location sensors;
— added support for Base-Offset-Time;
© IEEE 2024 – All rights reserved
iii
ISO/IEEE 11073-10471:2024(en)
— added new location identifiers;
— incorporated location identifiers from ZigBee Home Automation and Health Care profiles;
— added new appliance identifiers;
— changed from bit string to simple OIDs to report events;
— updated the example to simple OID;
— changed supplementary types to have upper 11 bits for location and lower 5 bits for number
to support more codes within partition;
— updated the version of this device specialization;
— updated the association details based on new version;
— updated the wording in 6.3 regarding the Not Allowed and Observational;
— added systematic names;
— tamper detected flag made a general health status flag for all sensors;
— enumeration codes provided to other systems (ZigBee);
— location RefId discriminator changed from parentheses to underscore ((3)->_3);
— encounter object added.
A list of all parts in the ISO 11073 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
© IEEE 2024 – All rights reserved
iv
ISO/IEEE 11073-10471:2024(en)
Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, a
normative definition of communication between personal telehealth independent living activity hub devices
and compute engines (e.g., cell phones, personal computers, personal health appliances, set top boxes) in a
manner that enables plug-and-play interoperability is established in this standard. Appropriate portions of
existing standards, including ISO/IEEE 11073 terminology, information models, application profile standards,
and transport standards are leveraged. The use of specific term codes, formats, and behaviors in telehealth
environments restricting optionality in base frameworks in favor of interoperability are specified. A common
core of communication functionality for personal telehealth independent living activity hubs is defined in this
standard.
Keywords: IEEE 11073-10471™, independent living activity hub, medical device communication, personal health
devices
The Institute of Electrical and Electronics Engineers, Inc.
3 Park Avenue, New York, NY 10016-5997, USA
All rights reserved. Published 22 June 2023. Printed in the United States of America.
IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by The Institute of Electrical and Electronics
Engineers, Incorporated.
PDF: ISBN 978-1-5044-9825-8 STD26246
Print: ISBN 978-1-5044-9826-5 STDPD26246
IEEE prohibits discrimination, harassment, and bullying.
For more information, visit https://www.ieee.org/about/corporate/governance/p9-26.html.
No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.
© IEEE 2024 – All rights reserved
v
ISO/IEEE 11073-10471:2024(en)
Important Notices and Disclaimers Concerning IEEE Standards Documents
IEEE Standards documents are made available for use subject to important notices and legal disclaimers. These notices and
disclaimers, or a reference to this page (https://standards.ieee.org/ipr/disclaimers.html), appear in all standards and may be found
under the heading “Important Notices and Disclaimers Concerning IEEE Standards Documents.”
Notice and Disclaimer of Liability Concerning the Use of IEEE Standards Documents
IEEE Standards documents are developed within IEEE Societies and subcommittees of IEEE Standards Association (IEEE SA)
Board of Governors. IEEE develops its standards through an accredited consensus development process, which brings together
volunteers representing varied viewpoints and interests to achieve the final product. IEEE Standards are documents developed
by volunteers with scientific, academic, and industry-based expertise in technical working groups. Volunteers are not necessarily
members of IEEE or IEEE SA and participate without compensation from IEEE. While IEEE administers the process and
establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or
verify the accuracy of any of the information or the soundness of any judgments contained in its standards.
IEEE makes no warranties or representations concerning its standards, and expressly disclaims all warranties, express or implied,
concerning this standard, including but not limited to the warranties of merchantability, fitness for a particular purpose and non-
infringement. In addition, IEEE does not warrant or represent that the use of the material contained in its standards is free from
patent infringement. IEEE standards documents are supplied “AS IS” and “WITH ALL FAULTS.”
Use of an IEEE standard is wholly voluntary. The existence of an IEEE Standard does not imply that there are no other ways to
produce, test, measure, purchase, market, or provide other goods and services related to the scope of the IEEE standard.
Furthermore, the viewpoint expressed at the time a standard is approved and issued is subject to change brought about through
developments in the state of the art and comments received from users of the standard.
In publishing and making its standards available, IEEE is not suggesting or rendering professional or other services for, or on
behalf of, any person or entity, nor is IEEE undertaking to perform any duty owed by any other person or entity to another. Any
person utilizing any IEEE Standards document, should rely upon his or her own independent judgment in the exercise of
reasonable care in any given circumstances or, as appropriate, seek the advice of a competent professional in determining the
appropriateness of a given IEEE standard.
IN NO EVENT SHALL IEEE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO: THE NEED TO PROCURE SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE PUBLICATION, USE OF, OR RELIANCE
UPON ANY STANDARD, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE AND REGARDLESS OF
WHETHER SUCH DAMAGE WAS FORESEEABLE.
Translations
The IEEE consensus development process involves the review of documents in English only. In the event that an IEEE standard
is translated, only the English version published by IEEE is the approved IEEE standard.
Off
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.